WTware v.5.4.24
[init] WTware init v.5.4.24/RK3066 (c) 2003-2016 WTware http://www.wtware.com
[init] Run /sbin/loader.
[init] Ok, PID 56.
[loader] WTware/RK3066 loader v.5.4.24.
[loader] [0] partition 'misc'.
[loader] [1] partition 'kernel'.
[loader] [2] partition 'boot'.
[loader] [3] partition 'recovery'.
[loader] [4] partition 'backup'.
[loader] [5] partition 'cache'.
[loader] [6] partition 'userdata'.
[loader] [7] partition 'kpanic'.
[loader] [8] partition 'system'. Store data here.
[loader] [9] partition 'user'.
[loader] Loader version 1.34.
[loader] Create /system/wtware directory.
[loader] Before modesetting:
[loader] xres 1280, xres_virtual 1280, yres 720, yres_virtual 720, bits_per_pixel 16
[loader] VSI.pixclock 0, sync 00000000
[loader] left_margin 220, right_margin 110, hsync_len 40
[loader] upper_margin 20, lower_margin 5, vsync_len 5
[loader] Video mode looks like 1920x1080.
[loader] dhcp: 360 bytes from 192.168.2.1.
00000000:000001540000000000110000c0a80201c0a80219004300440154000002010600 ...T...............C.D.T......
00000020:67458b6b0000000000000000c0a80219c0a81e6400000000305c64e519ec0000 gE.k............. d....0\d....
00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
[loader] dhcp: 360 bytes from 192.168.2.1.
00000000:000001540000000000110000c0a80201c0a80219004300440154000002010600 ...T...............C.D.T......
00000020:67458b6b0000000000000000c0a80219c0a81e6400000000305c64e519ec0000 gE.k............. d....0\d....
00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
[loader] dhcp: server address 192.168.2.1.
[loader] dhcp: 192.168.2.25/255.255.255.0.
[loader] dhcp: default gateway 192.168.2.1.
[loader] dhcp: DNS 192.168.2.1.
[loader] dhcp: TFTP from siaddr 192.168.30.100.
[loader] dhcp: TFTP 192.168.30.100.
[loader] dhcp: boot file (067) ARM/5.8.42/wtware.http.
[loader] TFTP binary "ARM/5.8.42/", configs prefix "ARM/", using "/" slash.
[loader] dhcp: wtpassword hash 2a56e292fe98a6dc16fb20bf4d30d457.
[loader] Unpack /packages/RK3066.
[loader] Run '/sbin/kotenok', log '', env '', pid ''.
[init] Run /sbin/kotenok.
[init] Ok, PID 86.
WTware v.5.4.24/RK3066 supervisor.
Send broadcast WTCU discover.
WTC listener is active.
WTC broadcast listener is active.
HTTPd listener is active.
[ KERNEL] [ 0.000000] Initializing cgroup subsys cpu
[ KERNEL] [ 0.000000] Linux version 3.0.36+ (root@cx-server) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #263 SMP PREEMPT Fri Mar 14 14:14:49 CST 2014
[ KERNEL] [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
[ KERNEL] [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ KERNEL] [ 0.000000] Machine: RK30board
[ KERNEL] [ 0.000000] memory reserve: Memory(base:0x8f000000 size:120M) reserved for
[ KERNEL] [ 0.000000] memory reserve: Memory(base:0x8e400000 size:12M) reserved for
[ KERNEL] [ 0.000000] memory reserve: Total reserved 132M
[ KERNEL] [ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ KERNEL] [ 0.000000] bootconsole [earlycon0] enabled
[ KERNEL] [ 0.000000] CPU SRAM: copied sram code from c0c1e000 to fef00010 - fef01b20
[ KERNEL] [ 0.000000] CPU SRAM: copied sram data from c0c1fb10 to fef01b20 - fef02234
[ KERNEL] [ 0.000000] sram_log: = T L ,Ip1V = Ty `o 7cZa B K 5 4 M i
[ KERNEL] [ 0.000000] can't get a available nume and deno
[ KERNEL] [ 0.000000] clk_frac_div can't get rate=49500000,uart0_frac_div
[ KERNEL] [ 0.000000] rk30_dvfs_init
[ KERNEL] [ 0.000000] L310 cache controller enabled
[ KERNEL] [ 0.000000] l2x0: 16 ways, CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001, Cache size: 524288 B
[ KERNEL] [ 0.000000] DDR DEBUG: version 1.00 20130130
[ KERNEL] [ 0.000000] DDR DEBUG: fix 2cs bug
[ KERNEL] [ 0.000000] DDR DEBUG: DDR3 Device
[ KERNEL] [ 0.000000] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
[ KERNEL] [ 0.000000] DDR DEBUG: init success!!! freq=300MHz
[ KERNEL] [ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=90
[ KERNEL] [ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=180
[ KERNEL] [ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=90
[ KERNEL] [ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=90
[ KERNEL] [ 0.000000] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
[ KERNEL] [ 0.000000] DDR DEBUG: DRV Pull-Up=0xb, DRV Pull-Dwn=0xb
[ KERNEL] [ 0.000000] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
[ KERNEL] [ 0.000000] rk30_iomux_init
[ KERNEL] [ 0.000000] On node 0 totalpages: 228352
[ KERNEL] [ 0.000000] free_area_init_node: node 0, pgdat c0c1b7a0, node_mem_map c16c7000
[ KERNEL] [ 0.000000] Normal zone: 1744 pages used for memmap
[ KERNEL] [ 0.000000] Normal zone: 0 pages reserved
[ KERNEL] [ 0.000000] Normal zone: 187696 pages, LIFO batch:31
[ KERNEL] [ 0.000000] HighMem zone: 304 pages used for memmap
[ KERNEL] [ 0.000000] HighMem zone: 38608 pages, LIFO batch:7
[ KERNEL] [ 0.000000] PERCPU: Embedded 7 pages/cpu @c1ecf000 s6976 r8192 d13504 u32768
[ KERNEL] [ 0.000000] pcpu-alloc: s6976 r8192 d13504 u32768 alloc=8*4096
[ KERNEL] [ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ KERNEL] [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 226304
[ KERNEL] [ 0.000000] Kernel command line: console=ttyFIQ0 androidboot.console=ttyFIQ0 init=/init initrd=0x62000000,0x00790000 mtdparts=rk29xxnand:0x00002000@0x00002000(misc),0x00006000@0x00004000(kernel),0x00008000@0x0000A000(boot),0x00010000@0x00012000(recovery),0x00020000@0x00022000(backup),0x00040000@0x00042000(cache),0x00200000@0x00082000(userdata),0x00002000@0x00282000(kpanic),0x00100000@0x00284000(system),-@0x00384000(user) bootver=2013-06-21#1.34 firmware_ver=4.1.1
[ KERNEL] [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ KERNEL] [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ KERNEL] [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ KERNEL] [ 0.000000] Memory: 740MB 152MB = 892MB total
[ KERNEL] [ 0.000000] Memory: 877356k/877356k available, 171220k reserved, 155648K highmem
[ KERNEL] [ 0.000000] Virtual kernel memory layout:
[ KERNEL] [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ KERNEL] [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ KERNEL] [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
[ KERNEL] [ 0.000000] vmalloc : 0xf7000000 - 0xfe800000 ( 120 MB)
[ KERNEL] [ 0.000000] lowmem : 0xc0000000 - 0xf6800000 ( 872 MB)
[ KERNEL] [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ KERNEL] [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ KERNEL] [ 0.000000] .init : 0xc0408000 - 0xc0513000 (1068 kB)
[ KERNEL] [ 0.000000] .text : 0xc0513000 - 0xc0baed4c (6768 kB)
[ KERNEL] [ 0.000000] .data : 0xc0bb0000 - 0xc0c1d5a8 ( 438 kB)
[ KERNEL] [ 0.000000] .bss : 0xc0c21024 - 0xc16c6c38 (10904 kB)
[ KERNEL] [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ KERNEL] [ 0.000000] Preemptible hierarchical RCU implementation.
[ KERNEL] [ 0.000000] NR_IRQS:448
[ KERNEL] [ 0.000000] rk30_gpio_init: 176 gpio irqs in 6 banks
[ KERNEL] [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ KERNEL] [ 0.000000] Console: colour dummy device 80x30
[ KERNEL] [ 0.004860] Calibrating delay loop (skipped) preset value.. 1631.46 BogoMIPS (lpj=8157341)
[ KERNEL] [ 0.013650] pid_max: default: 32768 minimum: 301
[ KERNEL] [ 0.018788] Mount-cache hash table entries: 512
[ KERNEL] [ 0.024174] Initializing cgroup subsys debug
[ KERNEL] [ 0.028753] Initializing cgroup subsys cpuacct
[ KERNEL] [ 0.033558] Initializing cgroup subsys freezer
[ KERNEL] [ 0.038327] CPU: Testing write buffer coherency: ok
[ KERNEL] [ 0.144219] CPU1: Booted secondary processor
[ KERNEL] [ 0.144257] Brought up 2 CPUs
[ KERNEL] [ 0.152044] SMP: Total of 2 processors activated (3262.93 BogoMIPS).
[ KERNEL] [ 0.159133] devtmpfs: initialized
[ KERNEL] [ 0.170195] NET: Registered protocol family 16
[ KERNEL] [ 0.175057] last_log: 0xedd00000 map to 0xf7004000 and copy to 0xc0c25280 (version 2.1)
[ KERNEL] [ 0.206960] lcdc0 is used as primary display device contoller!
[ KERNEL] [ 0.213467] lcdc1 is used as external display device controller!
[ KERNEL] [ 0.320455] rk29sdk_wifi_bt_gpio_control_init: init finished
[ KERNEL] [ 0.328170] console [ttyFIQ0] enabled, bootconsole disabled
[ KERNEL] [ 0.337217] Registered FIQ tty driver edc95c00
[ KERNEL] [ 0.349066] bio: create slab at 0
[ KERNEL] [ 0.353469] SCSI subsystem initialized
[ KERNEL] [ 0.353667] usbcore: registered new interface driver usbfs
[ KERNEL] [ 0.353799] usbcore: registered new interface driver hub
[ KERNEL] [ 0.368042] usbcore: registered new device driver usb
[ KERNEL] [ 0.368289] rk30_i2c rk30_i2c.0: i2c-0: RK30 I2C adapter
[ KERNEL] [ 0.368474] rk30_i2c rk30_i2c.1: i2c-1: RK30 I2C adapter
[ KERNEL] [ 0.368751] rk30_i2c rk30_i2c.2: i2c-2: RK30 I2C adapter
[ KERNEL] [ 0.368898] rk30_i2c rk30_i2c.3: i2c-3: RK30 I2C adapter
[ KERNEL] [ 0.369031] rk30_i2c rk30_i2c.4: i2c-4: RK30 I2C adapter
[ KERNEL] [ 0.369138] i2c-gpio: probe of i2c-gpio.5 failed with error -22
[ KERNEL] [ 0.405512] rk30-adc rk30-adc: rk30 adc: driver initialized
[ KERNEL] [ 0.405815] timed_gpio_probe
[ KERNEL] [ 0.405918] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ KERNEL] [ 0.406348] Bluetooth: Core ver 2.16
[ KERNEL] [ 0.406412] NET: Registered protocol family 31
[ KERNEL] [ 0.406446] Bluetooth: HCI device and connection manager initialized
[ KERNEL] [ 0.406492] Bluetooth: HCI socket layer initialized
[ KERNEL] [ 0.406527] Bluetooth: L2CAP socket layer initialized
[ KERNEL] [ 0.406574] Bluetooth: SCO socket layer initialized
[ KERNEL] [ 0.407490] rk fb probe ok!
[ KERNEL] [ 0.434725] tps65910_pre_init,line=38
[ KERNEL] [ 0.437313] TPS65910 Set default voltage.
[ KERNEL] [ 0.439378] tps65910_pre_init,line=248
[ KERNEL] [ 0.463497] cfg80211: Calling CRDA to update world regulatory domain
[ KERNEL] [ 0.463598] tps65910_post_init,line=256
[ KERNEL] [ 0.463627] tps65910_post_init:g_pmic_type=2
[ KERNEL] [ 0.484409] tps65910_post_init set vio vcc_io=3300000mV end
[ KERNEL] [ 0.485447] tps65910_post_init set vpll vdd11=2500000mV end
[ KERNEL] [ 0.486471] tps65910_post_init set vdig2 vdd11=1100000mV end
[ KERNEL] [ 0.487491] tps65910_post_init set vaux33 vcc_tp=3300000mV end
[ KERNEL] [ 0.489862] tps65910_post_init set vdd1 vdd_cpu=1200000mV end
[ KERNEL] [ 0.492232] tps65910_post_init set vdd2 vcc_ddr=1200000mV end
[ KERNEL] [ 0.493254] tps65910_post_init set vdig1 vcc18_cif=1800000mV end
[ KERNEL] [ 0.494278] tps65910_post_init set vaux1 vcc25_hdmi=2500000mV end
[ KERNEL] [ 0.495301] tps65910_post_init set vaux2 vcca33=3300000mV end
[ KERNEL] [ 0.496321] tps65910_post_init set vdac vccio_wl=1800000mV end
[ KERNEL] [ 0.497342] tps65910_post_init set vmmc vcc28_cif=3300000mV end
[ KERNEL] [ 0.497484] tps65910_post_init,line=342 END
[ KERNEL] [ 0.497515] tps65910_i2c_probe:irq=356,irq_base=384,gpio_base=384
[ KERNEL] [ 0.497619] rk1000_control_probe
[ KERNEL] [ 0.502513] rk1000_control_probe ok
[ KERNEL] [ 0.512504] tps65910-rtc tps65910-rtc: rtc core: registered tps65910 as rtc0
[ KERNEL] [ 0.515247] tps65910_rtc_probe:ok
[ KERNEL] [ 0.515324] Switching to clocksource timer1
[ KERNEL] [ 0.522073] lcdc0:reg_phy_base = 0x1010c000,reg_vir_base:0xf70a0000
[ KERNEL] [ 0.522159] fb0:win1
[ KERNEL] [ 0.522164] fb1:win0
[ KERNEL] [ 0.522169] fb2:win2
[ KERNEL] [ 0.522298] rk30 lcdc0 clk enable...
[ KERNEL] [ 0.522338] rk30 lcdc0 clk disable...
[ KERNEL] [ 0.523718] Switched to NOHz mode on CPU #0
[ KERNEL] [ 0.524252] Switched to NOHz mode on CPU #1
[ KERNEL] [ 0.550625] fb0:phy:8e400000>>vir:f8000000>>len:0xc00000
[ KERNEL] [ 0.612854] rk_fb_register>>>>>fb0
[ KERNEL] [ 0.613061] rk_fb_register>>>>>fb1
[ KERNEL] [ 0.613245] rk_fb_register>>>>>fb2
[ KERNEL] [ 0.613335] rk30 lcdc0 clk enable...
[ KERNEL] [ 0.613377] lcdc0: dclk:74250000>>fps:60 rk30_load_screen for lcdc0 ok!
[ KERNEL] [ 0.613425] lcdc0 wakeup from standby!
[ KERNEL] [ 0.613453] lcdc0 win1 open,atv layer:1
[ KERNEL] [ 0.613483] lcdc0: dclk:74250000>>fps:60 rk30_load_screen for lcdc0 ok!
[ KERNEL] [ 0.613531] lcdc1 driver not found!
[ KERNEL] [ 0.613558] lcdc1 driver not found!
[ KERNEL] [ 0.627774] lcdc1 driver not found!rk30 lcdc0 probe ok!
[ KERNEL] [ 0.629471] lcdc1:reg_phy_base = 0x1010e000,reg_vir_base:0xf70a4000
[ KERNEL] [ 0.629547] fb0:win1
[ KERNEL] [ 0.629551] fb1:win0
[ KERNEL] [ 0.629556] fb2:win2
[ KERNEL] [ 0.629633] rk30 lcdc1 clk enable...
[ KERNEL] [ 0.629661] rk30 lcdc1 clk disable...
[ KERNEL] [ 0.629693] fb3:phy:8e400000>>vir:f8000000>>len:0xc00000
[ KERNEL] [ 0.630018] rk_fb_register>>>>>fb3
[ KERNEL] [ 0.630225] rk_fb_register>>>>>fb4
[ KERNEL] [ 0.630403] rk_fb_register>>>>>fb5
[ KERNEL] [ 0.630430] rk30 lcdc1 probe ok!
[ KERNEL] [ 0.630552] pwm_regulator_probe:n_voltages=19
[ KERNEL] [ 0.630728] pwm_regulator.0: driver initialized
[ KERNEL] [ 0.647094] NET: Registered protocol family 2
[ KERNEL] [ 0.647254] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ KERNEL] [ 0.647636] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ KERNEL] [ 0.649510] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[ KERNEL] [ 0.650610] TCP: Hash tables configured (established 131072 bind 65536)
[ KERNEL] [ 0.650655] TCP reno registered
[ KERNEL] [ 0.650683] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ KERNEL] [ 0.650749] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ KERNEL] [ 0.651059] NET: Registered protocol family 1
[ KERNEL] [ 0.651254] RK29 Backlight Driver Initialized.
[ KERNEL] [ 0.651463] Unpacking initramfs...
[ KERNEL] [ 0.863346] Freeing initrd memory: 7744K
[ KERNEL] [ 0.863557] rk30-tsadc rk30-tsadc: initialized
[ KERNEL] [ 0.863673] PMU: registered new PMU device of type 0
[ KERNEL] [ 0.864571] DVFS WARNING: vd_cpu : selector=86,but volt <=0
[ KERNEL] [ 0.882549] [BT_RFKILL]: ret=0x0
[ KERNEL] [ 0.882742] Loaded driver for PL330 DMAC-1 rk29-pl330
[ KERNEL] [ 0.882784] DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[ KERNEL] [ 0.882969] Loaded driver for PL330 DMAC-2 rk29-pl330
[ KERNEL] [ 0.883007] DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14
[ KERNEL] [ 0.908337] highmem bounce pool size: 64 pages
[ KERNEL] [ 0.908535] ashmem: initialized
[ KERNEL] [ 0.918046] fuse init (API version 7.16)
[ KERNEL] [ 0.922996] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ KERNEL] [ 0.923054] io scheduler noop registered
[ KERNEL] [ 0.923091] io scheduler deadline registered
[ KERNEL] [ 0.923173] io scheduler cfq registered (default)
[ KERNEL] [ 0.943440] rga: Driver loaded succesfully
[ KERNEL] [ 0.947863] rk30-hdmi rk30-hdmi: rk30 hdmi probe sucess.
[ KERNEL] [ 0.948441] lcdc0: dclk:27000000>>fps:59 rk30_load_screen for lcdc0 ok!
[ KERNEL] [ 0.961832] rk1000_tv ver 2.0 probe ok
[ KERNEL] [ 0.962072] rk_serial.c v1.3 2012-12-14
[ KERNEL] [ 0.962171] rk_serial.0: ttyS0 at MMIO 0x10124000 (irq = 66) is a rk29_serial.0
[ KERNEL] [ 0.985396] rk_serial rk_serial.0: membase 0xf70c8000
[ KERNEL] [ 0.985469] rk_serial.3: ttyS3 at MMIO 0x20068000 (irq = 69) is a rk29_serial.3
[ KERNEL] [ 0.995917] ******** Show Sink Info ********
[ KERNEL] [ 0.995944] Support video mode:
[ KERNEL] [ 0.995965] 1920x1080p@60Hz.
[ KERNEL] [ 0.995984] 1920x1080p@50Hz.
[ KERNEL] [ 0.996002] 1280x720p@60Hz.
[ KERNEL] [ 0.996019] 1280x720p@50Hz.
[ KERNEL] [ 0.996037] 720x576p@50Hz.
[ KERNEL] [ 0.996054] 720x480p@60Hz.
[ KERNEL] [ 0.996071] Support audio type: LPCM
[ KERNEL] [ 0.996092] Support audio sample rate:
[ KERNEL] [ 0.996115] 32000
[ KERNEL] [ 0.996128] 44100
[ KERNEL] [ 0.996141] 48000
[ KERNEL] [ 0.996154] Support audio word lenght:
[ KERNEL] [ 0.996176] 16bit
[ KERNEL] [ 0.996189] 20bit
[ KERNEL] [ 0.996201] 24bit
[ KERNEL] [ 0.996214] ******** Show Sink Info ********
[ KERNEL] [ 0.996252] rk30 lcdc1 clk enable...
[ KERNEL] [ 0.996284] lcdc1: dclk:148500000>>fps:60 rk30_load_screen for lcdc1 ok!
[ KERNEL] [ 0.996326] lcdc1 wakeup from standby!
[ KERNEL] [ 0.996350] lcdc1 win1 open,atv layer:1
[ KERNEL] [ 0.996375] lcdc1: dclk:148500000>>fps:60 rk30_load_screen for lcdc1 ok!
[ KERNEL] [ 0.996417] lcdc1: dclk:148500000>>fps:60 rk30_load_screen for lcdc1 ok!
[ KERNEL] [ 1.025394] rk_serial rk_serial.3: membase 0xf70d0000
[ KERNEL] [ 1.025506] drivers/char/cx_led.c(115) cx_led_init: ......................>>>>>>>>>>>>>>>>
[ KERNEL] [ 1.025793] Rockchip ion module(version: 1.0) is successfully loaded
[ KERNEL] [ 1.027694] loop: module loaded
[ KERNEL] [ 1.027744] Android kernel panic handler initialized (bind=kpanic)
[ KERNEL] [ 1.028622] rk29 vmac rk29 vmac.0: ARC VMAC at 0x10204000 irq 51 72:12:0d:4c:c9:f3
[ KERNEL] [ 1.028726] PPP generic driver version 2.4.2
[ KERNEL] [ 1.028885] PPP Deflate Compression module registered
[ KERNEL] [ 1.028919] PPP BSD Compression module registered
[ KERNEL] [ 1.145857] PPP MPPE Compression module registered
[ KERNEL] [ 1.145888] NET: Registered protocol family 24
[ KERNEL] [ 1.145986] usbcore: registered new interface driver asix
[ KERNEL] [ 1.146046] usbcore: registered new interface driver cdc_ether
[ KERNEL] [ 1.146116] usbcore: registered new interface driver dm9620
[ KERNEL] [ 1.146171] usbcore: registered new interface driver SR9700_android
[ KERNEL] [ 1.146224] usbcore: registered new interface driver net1080
[ KERNEL] [ 1.146274] usbcore: registered new interface driver cdc_subset
[ KERNEL] [ 1.146331] usbcore: registered new interface driver zaurus
[ KERNEL] [ 1.146370] cdc_ncm: 04-Aug-2011
[ KERNEL] [ 1.146412] usbcore: registered new interface driver cdc_ncm
[ KERNEL] [ 1.146444] Rockchip WiFi SYS interface (V1.00) ...
[ KERNEL] [ 1.146496] Initializing USB Mass Storage driver...
[ KERNEL] [ 1.146552] usbcore: registered new interface driver usb-storage
[ KERNEL] [ 1.146585] USB Mass Storage support registered.
[ KERNEL] [ 1.146672] usbcore: registered new interface driver usbserial
[ KERNEL] [ 1.146724] USB Serial support registered for generic
[ KERNEL] [ 1.146777] usbcore: registered new interface driver usbserial_generic
[ KERNEL] [ 1.146814] usbserial: USB Serial Driver core
[ KERNEL] [ 1.146856] USB Serial support registered for GSM modem (1-port)
[ KERNEL] [ 1.146915] usbcore: registered new interface driver option
[ KERNEL] [ 1.146946] option: v0.7.2:USB Driver for GSM modems
[ KERNEL] [ 1.359126] DWC_OTG: ^^^^^^^^^^^^^^^^^Device Mode
[ KERNEL] [ 1.359167] usb20_otg usb20_otg: DWC OTG Controller
[ KERNEL] [ 1.359275] usb20_otg usb20_otg: new USB bus registered, assigned bus number 1
[ KERNEL] [ 1.359339] usb20_otg usb20_otg: irq 48, io mem 0x00000000
[ KERNEL] [ 1.359373] DWC_OTG: dwc_otg_hcd_start controller in device mode,everest
[ KERNEL] [ 1.359451] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ KERNEL] [ 1.359490] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ KERNEL] [ 1.359531] usb usb1: Product: DWC OTG Controller
[ KERNEL] [ 1.359561] usb usb1: Manufacturer: Linux 3.0.36+ dwc_otg_hcd
[ KERNEL] [ 1.359597] usb usb1: SerialNumber: usb20_otg
[ KERNEL] [ 1.359890] hub 1-0:1.0: USB hub found
[ KERNEL] [ 1.359920] hub 1-0:1.0: 1 port detected
[ KERNEL] [ 1.362496] DWC_OTG: host20_driver_probe host2.0 reg addr: 0x101c0000 remap:0xf7180000
[ KERNEL] [ 1.572993] DWC_OTG: ^^^^^^^^^^^^^^^^^^Host Mode
[ KERNEL] [ 1.573040] usb20_host usb20_host: DWC OTG Controller
[ KERNEL] [ 1.573092] usb20_host usb20_host: new USB bus registered, assigned bus number 2
[ KERNEL] [ 1.573148] usb20_host usb20_host: irq 49, io mem 0x00000000
[ KERNEL] [ 1.573212] DWC_OTG: Init: Port Power? op_state=1
[ KERNEL] [ 1.573239] DWC_OTG: Init: Power Port (0)
[ KERNEL] [ 1.573291] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ KERNEL] [ 1.573331] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ KERNEL] [ 1.573371] usb usb2: Product: DWC OTG Controller
[ KERNEL] [ 1.573399] usb usb2: Manufacturer: Linux 3.0.36+ host20_hcd
[ KERNEL] [ 1.573432] usb usb2: SerialNumber: usb20_host
[ KERNEL] [ 1.573706] hub 2-0:1.0: USB hub found
[ KERNEL] [ 1.573737] hub 2-0:1.0: 1 port detected
[ KERNEL] [ 1.574861] android_usb gadget: Mass Storage Function, version: 2009/09/11
[ KERNEL] [ 1.574903] android_usb gadget: Number of LUNs=2
[ KERNEL] [ 1.574931] lun0: LUN: removable file: (no medium)
[ KERNEL] [ 1.574961] lun1: LUN: removable file: (no medium)
[ KERNEL] [ 1.575154] android_usb gadget: android_usb ready
[ KERNEL] [ 1.575344] input: rk29-keypad as /devices/platform/rk29-keypad/input/input0
[ KERNEL] [ 1.575609] usbcore: registered new interface driver xpad
[ KERNEL] [ 1.575672] usbcore: registered new interface driver usb_acecad
[ KERNEL] [ 1.575709] acecad: v3.2:USB Acecad Flair tablet driver
[ KERNEL] [ 1.575772] usbcore: registered new interface driver aiptek
[ KERNEL] [ 1.575804] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
[ KERNEL] [ 1.575847] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen
[ KERNEL] [ 1.575913] usbcore: registered new interface driver gtco
[ KERNEL] [ 1.575945] GTCO usb driver version: 2.00.0006
[ KERNEL] [ 1.575993] usbcore: registered new interface driver hanwang
[ KERNEL] [ 1.576051] usbcore: registered new interface driver kbtab
[ KERNEL] [ 1.576083] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
[ KERNEL] [ 1.576140] usbcore: registered new interface driver wacom
[ KERNEL] [ 1.576172] wacom: v1.52:USB Wacom tablet driver
[ KERNEL] [ 1.576318] ++++++++remotectl_init
[ KERNEL] [ 1.576489] input: rkxx-remotectl as /devices/platform/rkxx-remotectl/input/input1
[ KERNEL] [ 1.576766] using rtc device, tps65910, for alarms
[ KERNEL] [ 1.577011] lirc_dev: IR Remote Control driver registered, major 250
[ KERNEL] [ 1.577049] IR NEC protocol handler initialized
[ KERNEL] [ 1.577077] IR RC5(x) protocol handler initialized
[ KERNEL] [ 1.577105] IR RC6 protocol handler initialized
[ KERNEL] [ 1.577132] IR JVC protocol handler initialized
[ KERNEL] [ 1.577158] IR Sony protocol handler initialized
[ KERNEL] [ 1.577184] IR RC5 (streamzap) protocol handler initialized
[ KERNEL] [ 1.577216] IR LIRC bridge handler initialized
[ KERNEL] [ 1.577241] Linux video capture interface: v2.00
[ KERNEL] [ 1.577339] usbcore: registered new interface driver uvcvideo
[ KERNEL] [ 1.577372] USB Video Class driver (v1.1.0)
[ KERNEL] [ 1.577429] def_ref_volt: 2500mV, curr_ref_volt: 2500mV
[ KERNEL] [ 1.577968] device-mapper: uevent: version 1.0.3
[ KERNEL] [ 1.578177] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ KERNEL] [ 1.578300] Bluetooth: HCI UART driver ver 2.2
[ KERNEL] [ 1.578329] Bluetooth: HCI H4 protocol initialized
[ KERNEL] [ 1.578356] Bluetooth: HCILL protocol initialized
[ KERNEL] [ 1.578417] cpuidle: using governor ladder
[ KERNEL] [ 1.578442] cpuidle: using governor menu
[ KERNEL] [ 1.593774]
[ KERNEL] [ 1.593777] drivers/mmc/core/core.c...1824.. ===== mmc_rescan Begin....[mmc0]
[ KERNEL] [ 1.593828]
[ KERNEL] [ 1.593831] =================
[ KERNEL] [ 1.593836] mmc_rescan..1831.. ====find no SDMMC host. [mmc0]
[ KERNEL] [ 1.593944] .Line3910..The End of SDMMC-probe Ver.5.03 The last modify date is 2013-02-21. [sd_mmc]
[ KERNEL] [ 1.594107]
[ KERNEL] [ 1.594110] drivers/mmc/core/core.c...1824.. ===== mmc_rescan Begin....[mmc1]
[ KERNEL] [ 1.594183] .Line3910..The End of SDMMC-probe Ver.5.03 The last modify date is 2013-02-21. [sdio]
[ KERNEL] [ 1.595476] usbcore: registered new interface driver usbhid
[ KERNEL] [ 1.595512] usbhid: USB HID core driver
[ KERNEL] [ 1.595765] logger: created 256K log 'log_main'
[ KERNEL] [ 1.595901] logger: created 256K log 'log_events'
[ KERNEL] [ 1.595983] logger: created 256K log 'log_radio'
[ KERNEL] [ 1.596060] logger: created 256K log 'log_system'
[ KERNEL] [ 1.596440] i2c-core: driver [RK1000_CODEC] using legacy suspend method
[ KERNEL] [ 1.596478] i2c-core: driver [RK1000_CODEC] using legacy resume method
[ KERNEL] [ 1.730980] RK1000_CODEC 2-0060: Failed to add route Left DAC->Left Mixer
[ KERNEL] [ 1.737143] asoc: rk1000_codec <-> rk29_i2s.0 mapping ok
[ KERNEL] [ 1.737471] ALSA device list:
[ KERNEL] [ 1.737491] #0: RK29_RK1000
[ KERNEL] [ 1.737591] GACT probability NOT on
[ KERNEL] [ 1.737619] Mirror/redirect action on
[ KERNEL] [ 1.737643] u32 classifier
[ KERNEL] [ 1.737659] Actions configured
[ KERNEL] [ 1.737682] Netfilter messages via NETLINK v0.30.
[ KERNEL] [ 1.737742] nf_conntrack version 0.5.0 (13829 buckets, 55316 max)
[ KERNEL] [ 1.738048] ctnetlink v0.93: registering with nfnetlink.
[ KERNEL] [ 1.738111] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ KERNEL] [ 1.738154] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ KERNEL] [ 1.738436] xt_time: kernel timezone is -0000
[ KERNEL] [ 1.738584] ip_tables: (C) 2000-2006 Netfilter Core Team
[ KERNEL] [ 1.738726] arp_tables: (C) 2002 David S. Miller
[ KERNEL] [ 1.738786] TCP cubic registered
[ KERNEL] [ 1.738806] Initializing XFRM netlink socket
[ KERNEL] [ 1.739193] NET: Registered protocol family 10
[ KERNEL] [ 1.739762] Mobile IPv6
[ KERNEL] [ 1.739799] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ KERNEL] [ 1.739912] IPv6 over IPv4 tunneling driver
[ KERNEL] [ 1.740493] NET: Registered protocol family 17
[ KERNEL] [ 1.740539] NET: Registered protocol family 15
[ KERNEL] [ 1.746025] Bluetooth: RFCOMM TTY layer initialized
[ KERNEL] [ 1.746061] Bluetooth: RFCOMM socket layer initialized
[ KERNEL] [ 1.746090] Bluetooth: RFCOMM ver 1.11
[ KERNEL] [ 1.746134] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ KERNEL] [ 1.746165] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ KERNEL] [ 1.746293] NET: Registered protocol family 35
[ KERNEL] [ 1.746376] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ KERNEL] [ 1.746439] Registering SWP/SWPB emulation handler
[ KERNEL] [ 1.749947] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801)
[ KERNEL] [ 1.750236] usbcore: registered new interface driver snd-usb-audio
[ KERNEL] [ 1.750473] Freeing init memory: 1068K
[ KERNEL] [ 1.804827] gp_rknand_info = : 0xed10e400
[ KERNEL] [ 1.805002] request IRQ_NANDC irq , ret=0.........
[ KERNEL] [ 1.805043] FTL INFO:Version = 438,Date = 20130516
[ KERNEL] [ 1.805134] FlashCopyProgBuf1=0xc156b000
[ KERNEL] [ 1.805176] ATime: 40 ns AHB: 150 timming: 1082
[ KERNEL] [ 1.805207] No.1 FLASH INFO:ad de 94 eb 74
[ KERNEL] [ 1.805736] ATime: 32 ns AHB: 150 timming: 1061
[ KERNEL] [ 1.805922] ATime: 32 ns AHB: 150 timming: 1061
[ KERNEL] [ 1.805952] randomizer = 2 , EccBits = 28 pSpec->pReadRetrial = bf00c360
[ KERNEL] [ 1.847360] totalLogicBlkRaw = 1887
[ KERNEL] [ 1.847393] gBootMedia = 1 gSdmmcFwPartOffset =0!
[ KERNEL] [ 1.847423] rknand_buffer.c version: 4.38 20121130!
[ KERNEL] [ 1.847604] 10 cmdlinepart partitions found on MTD device rk29xxnand
[ KERNEL] [ 1.847643] Creating 10 MTD partitions on "rk29xxnand":
[ KERNEL] [ 1.847681] 0x000000400000-0x000000800000 : "misc"
[ KERNEL] [ 1.848308] 0x000000800000-0x000001400000 : "kernel"
[ KERNEL] [ 1.848790] 0x000001400000-0x000002400000 : "boot"
[ KERNEL] [ 1.849219] 0x000002400000-0x000004400000 : "recovery"
[ KERNEL] [ 1.849641] 0x000004400000-0x000008400000 : "backup"
[ KERNEL] [ 1.850097] 0x000008400000-0x000010400000 : "cache"
[ KERNEL] [ 1.850581] 0x000010400000-0x000050400000 : "userdata"
[ KERNEL] [ 1.851612] 0x000050400000-0x000050800000 : "kpanic"
[ KERNEL] [ 1.853655] apanic: Bound to mtd partition 'kpanic'
[ KERNEL] [ 1.853687] apanic: No panic data available
[ KERNEL] [ 1.853717] 0x000050800000-0x000070800000 : "system"
[ KERNEL] [ 1.854458] 0x000070800000-0x0001d7c00000 : "user"
[ KERNEL] [ 1.858307] startBlk = 49 sysProtAddr = 48
[ KERNEL] [ 1.863421] EXT4-fs (mtdblock8): mounted filesystem with ordered data mode. Opts:
[ KERNEL] [ 1.864685] EXT4-fs (mtdblock8): re-mounted. Opts:
[ KERNEL] [ 1.955709] usb 2-1: new high speed USB device number 2 using usb20_host
[ KERNEL] [ 2.006579] EXT4-fs (mtdblock8): re-mounted. Opts:
[ KERNEL] [ 2.166915] usb 2-1: New USB device found, idVendor=05e3, idProduct=0608
[ KERNEL] [ 2.166961] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ KERNEL] [ 2.167004] usb 2-1: Product: USB2.0 Hub
[ KERNEL] [ 2.167582] hub 2-1:1.0: USB hub found
[ KERNEL] [ 2.167897] hub 2-1:1.0: 4 ports detected
[ KERNEL] [ 2.301131]
[ KERNEL] [ 2.301158]
[ KERNEL] [ 2.301179]
[ KERNEL] [ 2.445718] usb 2-1.1: new full speed USB device number 3 using usb20_host
[ KERNEL] [ 2.551671] usb 2-1.1: New USB device found, idVendor=045e, idProduct=07b2
[ KERNEL] [ 2.551720] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ KERNEL] [ 2.551785] usb 2-1.1: Product: Microsoft® 2.4GHz Transceiver v8.0
[ KERNEL] [ 2.551825] usb 2-1.1: Manufacturer: Microsoft
[ KERNEL] [ 2.555535] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/platform/usb20_host/usb2/2-1/2-1.1/2-1.1:1.0/input/input2
[ KERNEL] [ 2.555873] generic-usb 0003:045E:07B2.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-usb20_host-1.1/input0
[ KERNEL] [ 2.562285] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/platform/usb20_host/usb2/2-1/2-1.1/2-1.1:1.1/input/input3
[ KERNEL] [ 2.562579] generic-usb 0003:045E:07B2.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-usb20_host-1.1/input1
[ KERNEL] [ 2.583247] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/platform/usb20_host/usb2/2-1/2-1.1/2-1.1:1.2/input/input4
[ KERNEL] [ 2.583562] generic-usb 0003:045E:07B2.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-usb20_host-1.1/input2
[ KERNEL] [ 6.690735] enter func vmac_open...
[ KERNEL] [ 6.690837] power on phy
[ KERNEL] [ 7.715601] Read the Ethernet MAC address from IDB:00:00:00:00:00:00
[ KERNEL] [ 7.715794] eth_mac_from_RANDOM***********:72:12:D:4C:C9:0
[ KERNEL] [ 7.735328] vmac_mii_bus: probed
[ KERNEL] [ 7.735688] rk29 vmac rk29 vmac.0: PHY driver [Generic PHY] (mii_bus:phy_addr=0:00, irq=-1)
[ KERNEL] [ 7.738348] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ KERNEL] [ 9.735982] PHY: 0:00 - Link is Down
[ KERNEL] [ 10.735981] PHY: 0:00 - Link is Up - 100/Full
[ KERNEL] [ 10.738558] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ KERNEL] [ 15.728485] EXT4-fs (mtdblock8): re-mounted. Opts:
[ KERNEL] [ 15.747016] EXT4-fs (mtdblock8): re-mounted. Opts:
[ KERNEL] [ 17.395426] DWC_OTG: ********vbus detect*********************************************
[ KERNEL] [ 19.624443] EXT4-fs (mtdblock8): re-mounted. Opts:
[ KERNEL] [ 19.632489] EXT4-fs (mtdblock8): re-mounted. Opts:
[ KERNEL] [ 28.704272] EXT4-fs (mtdblock8): re-mounted. Opts:
[ KERNEL] [ 28.711640] EXT4-fs (mtdblock8): re-mounted. Opts:
[ KERNEL] [ 34.691193]
[ KERNEL] [ 34.691232]
[ KERNEL] [ 34.691260]
[ KERNEL] [ 38.900788] enter func vmac_close...
[ KERNEL] [ 39.428828] enter func vmac_open...
[ KERNEL] [ 39.428937] power on phy
[ KERNEL] [ 40.975460] Read the Ethernet MAC address from IDB:30:5c:64:e5:19:ec
[ KERNEL] [ 40.975628] eth_mac_from_idb***********:30:5C:64:E5:19:EC
[ KERNEL] [ 40.995133] vmac_mii_bus: probed
[ KERNEL] [ 40.995383] rk29 vmac rk29 vmac.0: PHY driver [Generic PHY] (mii_bus:phy_addr=0:00, irq=-1)
[ KERNEL] [ 40.998581] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ KERNEL] [ 42.985943] PHY: 0:00 - Link is Down
[ KERNEL] [ 43.985946] PHY: 0:00 - Link is Up - 100/Full
[ KERNEL] [ 43.988513] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[loader] Run '/sbin/gm', log '', env '', pid ''.
[ init] [ 49.584225] Run /sbin/gm.
[ init] [ 49.584380] Ok, PID 87.
[ gm] [ 49.586373] WTware/RK3066 session manager v.5.4.24.
[ gm] [ 49.592396] HTTP: download file ARM/Everyone/list.wtc from 192.168.30.100.
[ gm] [ 49.640169] fstream.cpp ( 437): -- ERROR -- Conection with 192.168.30.100:80 failed, errno 111.
[ gm] [ 49.640353] ERROR: connection to http 192.168.30.100 port 80 failed.
[ gm] [ 49.640678] HTTP: download file ARM/Terminals/30.5C.64.E5.19.EC/config.wtc from 192.168.30.100.
[ gm] [ 49.680213] fstream.cpp ( 437): -- ERROR -- Conection with 192.168.30.100:80 failed, errno 111.
[ gm] [ 49.680377] ERROR: connection to http 192.168.30.100 port 80 failed.
[ gm] [ 49.680608] HTTP: download file ARM/Terminals/30.5C.64.E5.19.EC.wtc from 192.168.30.100.
[ gm] [ 49.720057] fstream.cpp ( 437): -- ERROR -- Conection with 192.168.30.100:80 failed, errno 111.
[ gm] [ 49.720208] ERROR: connection to http 192.168.30.100 port 80 failed.
[ gm] [ 49.720421] HTTP: download file ARM/Terminals/default.wtc from 192.168.30.100.
[ gm] [ 49.759673] fstream.cpp ( 437): -- ERROR -- Conection with 192.168.30.100:80 failed, errno 111.
[ gm] [ 49.759818] ERROR: connection to http 192.168.30.100 port 80 failed.
[ gm] [ 49.760067] HTTP: download file ARM/Everyone/all.wtc from 192.168.30.100.
[ init] [ 50.430848] Process pid 56 terminated, status 00000000.
[ gm] [ 52.809800] fstream.cpp ( 437): -- ERROR -- Conection with 192.168.30.100:80 failed, errno 111.
[ gm] [ 52.810380] ERROR: connection to http 192.168.30.100 port 80 failed.
[ gm] [ 52.811069] Local config not found. Fatal error.
[ gm] [ 56.735418] Add keyboard event4: Microsoft Microsoft® 2.4GHz Transceiver v8.0.
[ gm] [ 56.735593] EV_REL flag found. Add mouse event3: Microsoft Microsoft® 2.4GHz Transceiver v8.0.
[ gm] [ 56.735706] Add keyboard event2: Microsoft Microsoft® 2.4GHz Transceiver v8.0.
[ gm] [ 56.735805] Add keyboard event1: rkxx-remotectl.
[ gm] [ 56.735901] Add keyboard event0: rk29-keypad.
RSH: listener is active.
Everyone can control terminal by HTTP.
Send broadcast WTCU discover.
[ gm] [ 57.797849] globalConfig.cpp ( 937): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
[ gm] [ 57.798053] globalConfig.cpp ( 937): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
[ gm] [ 57.798220] globalConfig.cpp ( 937): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
[ gm] [ 57.798373] globalConfig.cpp ( 937): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
[ gm] [ 57.798554] globalConfig.cpp ( 937): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
[ gm] [ 57.798709] globalConfig.cpp ( 937): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
[ gm] [ 57.798879] Final message: INTERNAL ERROR
WTware v.5.4.24/RK3066
File: layer.cpp
Line: 900
Please, report this information to WTware tech support.
[ gm] [ 57.812182] /graphic/exlm.png: 44x42.
[ gm] [ 57.812958] Nobody can control terminal by VNC.
kotenok-httpd.cpp ( 375): -- ERROR -- HTTP: file /etc/config.compiled not found.
Home WTware diskless client.