WTware v.6.0.3
WTware 6.0.3 supervisor.
[ KERNEL] [ 0.000000] Linux version 4.19.114 (aka@c23) (gcc version 8.3.0 (Debian 8.3.0-6)) #15 SMP Mon Apr 13 17:25:14 EDT 2020
[ KERNEL] [ 0.000000] CPU0: Hyper-Threading is disabled
[ KERNEL] [ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ KERNEL] [ 0.000000] BIOS-provided physical RAM map:
[ KERNEL] [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ KERNEL] [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ KERNEL] [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ KERNEL] [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003f7f9fff] usable
[ KERNEL] [ 0.000000] BIOS-e820: [mem 0x000000003f7fa000-0x000000003f7fcfff] ACPI data
[ KERNEL] [ 0.000000] BIOS-e820: [mem 0x000000003f7fd000-0x000000003f7fdfff] ACPI NVS
[ KERNEL] [ 0.000000] BIOS-e820: [mem 0x000000003f7fe000-0x000000003f7fffff] reserved
[ KERNEL] [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ KERNEL] [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ KERNEL] [ 0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved
[ KERNEL] [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ KERNEL] [ 0.000000] SMBIOS 2.3 present.
[ KERNEL] [ 0.000000] DMI: System Manufacturer System Name/P4BP-MX, BIOS ASUS P4BP-MX ACPI BIOS Revision 1016 02/02/2004
[ KERNEL] [ 0.000000] tsc: Fast TSC calibration using PIT
[ KERNEL] [ 0.000000] tsc: Detected 2018.039 MHz processor
[ KERNEL] [ 0.017608] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ KERNEL] [ 0.017616] e820: remove [mem 0x000a0000-0x000fffff] usable
[ KERNEL] [ 0.017630] last_pfn = 0x3f7fa max_arch_pfn = 0x100000
[ KERNEL] [ 0.017644] MTRR default type: uncachable
[ KERNEL] [ 0.017646] MTRR fixed ranges enabled:
[ KERNEL] [ 0.017649] 00000-9FFFF write-back
[ KERNEL] [ 0.017651] A0000-BFFFF uncachable
[ KERNEL] [ 0.017653] C0000-C7FFF write-protect
[ KERNEL] [ 0.017655] C8000-EFFFF uncachable
[ KERNEL] [ 0.017658] F0000-FFFFF write-protect
[ KERNEL] [ 0.017660] MTRR variable ranges enabled:
[ KERNEL] [ 0.017663] 0 base 000000000 mask FE0000000 write-back
[ KERNEL] [ 0.017666] 1 base 020000000 mask FE0000000 write-back
[ KERNEL] [ 0.017668] 2 base 03F800000 mask FFF800000 uncachable
[ KERNEL] [ 0.017671] 3 base 0F0000000 mask FF8000000 write-combining
[ KERNEL] [ 0.017673] 4 disabled
[ KERNEL] [ 0.017674] 5 disabled
[ KERNEL] [ 0.017675] 6 disabled
[ KERNEL] [ 0.017677] 7 disabled
[ KERNEL] [ 0.017975] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ KERNEL] [ 0.040374] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ KERNEL] [ 0.040462] BRK [0x01977000, 0x01977fff] PGTABLE
[ KERNEL] [ 0.040523] ACPI: Early table checksum verification disabled
[ KERNEL] [ 0.042680] ACPI: RSDP 0x00000000000F5150 000014 (v00 ASUS )
[ KERNEL] [ 0.042689] ACPI: RSDT 0x000000003F7FA000 000030 (v01 ASUS P4BP-MX 42302E31 MSFT 31313031)
[ KERNEL] [ 0.042701] ACPI: FACP 0x000000003F7FA0C0 000074 (v01 ASUS P4BP-MX 42302E31 MSFT 31313031)
[ KERNEL] [ 0.042715] ACPI: DSDT 0x000000003F7FA134 002735 (v01 ASUS P4BP-MX 00001000 MSFT 0100000B)
[ KERNEL] [ 0.042723] ACPI: FACS 0x000000003F7FD000 000040
[ KERNEL] [ 0.042729] ACPI: BOOT 0x000000003F7FA030 000028 (v01 ASUS P4BP-MX 42302E31 MSFT 31313031)
[ KERNEL] [ 0.042737] ACPI: APIC 0x000000003F7FA058 00005A (v01 ASUS P4BP-MX 42302E31 MSFT 31313031)
[ KERNEL] [ 0.042771] ACPI: Local APIC address 0xfee00000
[ KERNEL] [ 0.042779] 131MB HIGHMEM available.
[ KERNEL] [ 0.042784] 883MB LOWMEM available.
[ KERNEL] [ 0.042786] mapped low ram: 0 - 373fe000
[ KERNEL] [ 0.042787] low ram: 0 - 373fe000
[ KERNEL] [ 0.042791] BRK [0x01978000, 0x01978fff] PGTABLE
[ KERNEL] [ 0.042801] Zone ranges:
[ KERNEL] [ 0.042805] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ KERNEL] [ 0.042809] Normal [mem 0x0000000001000000-0x00000000373fdfff]
[ KERNEL] [ 0.042812] HighMem [mem 0x00000000373fe000-0x000000003f7f9fff]
[ KERNEL] [ 0.042815] Movable zone start for each node
[ KERNEL] [ 0.042816] Early memory node ranges
[ KERNEL] [ 0.042819] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ KERNEL] [ 0.042821] node 0: [mem 0x0000000000100000-0x000000003f7f9fff]
[ KERNEL] [ 0.042825] Initmem setup node 0 [mem 0x0000000000001000-0x000000003f7f9fff]
[ KERNEL] [ 0.042829] On node 0 totalpages: 259992
[ KERNEL] [ 0.060074] DMA zone: 32 pages used for memmap
[ KERNEL] [ 0.060078] DMA zone: 0 pages reserved
[ KERNEL] [ 0.060081] DMA zone: 3998 pages, LIFO batch:0
[ KERNEL] [ 0.060336] Normal zone: 1736 pages used for memmap
[ KERNEL] [ 0.060340] Normal zone: 222206 pages, LIFO batch:63
[ KERNEL] [ 0.072534] HighMem zone: 33788 pages, LIFO batch:7
[ KERNEL] [ 0.074435] Using APIC driver default
[ KERNEL] [ 0.074460] Reserving Intel graphics memory at [mem 0x3f800000-0x3fffffff]
[ KERNEL] [ 0.074601] ACPI: PM-Timer IO Port: 0xe408
[ KERNEL] [ 0.074605] ACPI: Local APIC address 0xfee00000
[ KERNEL] [ 0.074619] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ KERNEL] [ 0.074635] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ KERNEL] [ 0.074640] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
[ KERNEL] [ 0.074644] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 22 low level)
[ KERNEL] [ 0.074648] ACPI: IRQ0 used by override.
[ KERNEL] [ 0.074651] ACPI: IRQ9 used by override.
[ KERNEL] [ 0.074655] Using ACPI (MADT) for SMP configuration information
[ KERNEL] [ 0.074664] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ KERNEL] [ 0.074697] [mem 0x40000000-0xfebfffff] available for PCI devices
[ KERNEL] [ 0.074701] Booting paravirtualized kernel on bare hardware
[ KERNEL] [ 0.074712] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ KERNEL] [ 0.074732] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:1 nr_node_ids:1
[ KERNEL] [ 0.075071] percpu: Embedded 27 pages/cpu s78988 r0 d31604 u110592
[ KERNEL] [ 0.075087] pcpu-alloc: s78988 r0 d31604 u110592 alloc=27*4096
[ KERNEL] [ 0.075091] pcpu-alloc: [0] 0
[ KERNEL] [ 0.075128] Built 1 zonelists, mobility grouping on. Total pages: 258224
[ KERNEL] [ 0.075134] Kernel command line: BOOT_IMAGE=http://10.10.0.3:789/wtware/6.0.3/packages/kernel quiet
[ KERNEL] [ 0.076141] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ KERNEL] [ 0.076681] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ KERNEL] [ 0.076721] Initializing CPU#0
[ KERNEL] [ 0.076749] Initializing HighMem for node 0 (000373fe:0003f7fa)
[ KERNEL] [ 0.096772] Initializing Movable for node 0 (00000000:00000000)
[ KERNEL] [ 0.110776] Memory: 1021120K/1039968K available (4305K kernel code, 219K rwdata, 1320K rodata, 3436K init, 300K bss, 18848K reserved, 0K cma-reserved, 135152K highmem)
[ KERNEL] [ 0.110791] virtual kernel memory layout:
[ KERNEL] [ 0.110791] fixmap : 0xfff65000 - 0xfffff000 ( 616 kB)
[ KERNEL] [ 0.110791] cpu_entry : 0xffc00000 - 0xffc9d000 ( 628 kB)
[ KERNEL] [ 0.110791] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ KERNEL] [ 0.110791] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ KERNEL] [ 0.110791] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ KERNEL] [ 0.110791] .init : 0xc15c4000 - 0xc191f000 (3436 kB)
[ KERNEL] [ 0.110791] .data : 0xc14345fd - 0xc15b8e40 (1554 kB)
[ KERNEL] [ 0.110791] .text : 0xc1000000 - 0xc14345fd (4305 kB)
[ KERNEL] [ 0.110794] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ KERNEL] [ 0.110971] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ KERNEL] [ 0.111088] rcu: Hierarchical RCU implementation.
[ KERNEL] [ 0.111093] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[ KERNEL] [ 0.111096] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ KERNEL] [ 0.111119] NR_IRQS: 2304, nr_irqs: 256, preallocated irqs: 16
[ KERNEL] [ 0.111430] CPU 0 irqstacks, hard=(ptrval) soft=(ptrval)
[ KERNEL] [ 0.113310] Console: colour VGA+ 80x25
[ KERNEL] [ 0.113330] console [tty0] enabled
[ KERNEL] [ 0.113357] ACPI: Core revision 20180810
[ KERNEL] [ 0.113575] APIC: Switch to symmetric I/O mode setup
[ KERNEL] [ 0.113581] Enabling APIC mode: Flat. Using 1 I/O APICs
[ KERNEL] [ 0.114053] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ KERNEL] [ 0.133572] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1d16bf135d1, max_idle_ns: 440795259016 ns
[ KERNEL] [ 0.133609] Calibrating delay loop (skipped), value calculated using timer frequency.. 4036.07 BogoMIPS (lpj=8072156)
[ KERNEL] [ 0.133617] pid_max: default: 32768 minimum: 301
[ KERNEL] [ 0.133700] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ KERNEL] [ 0.133714] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ KERNEL] [ 0.134154] CPU0: Thermal monitoring enabled (TM1)
[ KERNEL] [ 0.134182] Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128
[ KERNEL] [ 0.134185] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64, 1GB 0
[ KERNEL] [ 0.134189] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ KERNEL] [ 0.134192] Spectre V2 : Spectre mitigation: kernel not compiled with retpoline; no mitigation available!
[ KERNEL] [ 0.134194] Speculative Store Bypass: Vulnerable
[ KERNEL] [ 0.134196] L1TF: Kernel not compiled for PAE. No mitigation for L1TF
[ KERNEL] [ 0.134260] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ KERNEL] [ 0.143901] Freeing SMP alternatives memory: 20K
[ KERNEL] [ 0.253991] smpboot: CPU0: Intel(R) Celeron(R) CPU 2.00GHz (family: 0xf, model: 0x2, stepping: 0x7)
[ KERNEL] [ 0.254459] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[ KERNEL] [ 0.254488] ... version: 0
[ KERNEL] [ 0.254490] ... bit width: 40
[ KERNEL] [ 0.254491] ... generic registers: 18
[ KERNEL] [ 0.254493] ... value mask: 000000ffffffffff
[ KERNEL] [ 0.254495] ... max period: 0000007fffffffff
[ KERNEL] [ 0.254496] ... fixed-purpose events: 0
[ KERNEL] [ 0.254498] ... event mask: 000000000003ffff
[ KERNEL] [ 0.254667] rcu: Hierarchical SRCU implementation.
[ KERNEL] [ 0.255024] smp: Bringing up secondary CPUs ...
[ KERNEL] [ 0.255029] smp: Brought up 1 node, 1 CPU
[ KERNEL] [ 0.255032] smpboot: Max logical packages: 1
[ KERNEL] [ 0.255035] smpboot: Total of 1 processors activated (4036.07 BogoMIPS)
[ KERNEL] [ 0.255705] devtmpfs: initialized
[ KERNEL] [ 0.256066] random: get_random_u32 called from bucket_table_alloc.isra.8+0x7d/0x160 with crng_init=0
[ KERNEL] [ 0.256282] PM: Registering ACPI NVS region [mem 0x3f7fd000-0x3f7fdfff] (4096 bytes)
[ KERNEL] [ 0.256446] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ KERNEL] [ 0.256461] futex hash table entries: 256 (order: 2, 16384 bytes)
[ KERNEL] [ 0.256530] pinctrl core: initialized pinctrl subsystem
[ KERNEL] [ 0.256808] NET: Registered protocol family 16
[ KERNEL] [ 0.257275] cpuidle: using governor ladder
[ KERNEL] [ 0.257281] cpuidle: using governor menu
[ KERNEL] [ 0.257365] Simple Boot Flag at 0x3a set to 0x80
[ KERNEL] [ 0.257389] ACPI: bus type PCI registered
[ KERNEL] [ 0.269026] PCI: PCI BIOS revision 2.10 entry at 0xf1d90, last bus=2
[ KERNEL] [ 0.269029] PCI: Using configuration type 1 for base access
[ KERNEL] [ 0.296433] ACPI: Added _OSI(Module Device)
[ KERNEL] [ 0.296437] ACPI: Added _OSI(Processor Device)
[ KERNEL] [ 0.296439] ACPI: Added _OSI(3.0 _SCP Extensions)
[ KERNEL] [ 0.296441] ACPI: Added _OSI(Processor Aggregator Device)
[ KERNEL] [ 0.296444] ACPI: Added _OSI(Linux-Dell-Video)
[ KERNEL] [ 0.296447] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ KERNEL] [ 0.299599] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ KERNEL] [ 0.304691] ACPI: Interpreter enabled
[ KERNEL] [ 0.304756] ACPI: (supports S0 S1 S3 S5)
[ KERNEL] [ 0.304760] ACPI: Using IOAPIC for interrupt routing
[ KERNEL] [ 0.305211] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ KERNEL] [ 0.305677] ACPI: Enabled 5 GPEs in block 00 to 1F
[ KERNEL] [ 0.342717] acpi LNXCPU:00: Invalid PBLK length [5]
[ KERNEL] [ 0.343213] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ KERNEL] [ 0.343423] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ KERNEL] [ 0.343635] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ KERNEL] [ 0.343844] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
[ KERNEL] [ 0.344033] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ KERNEL] [ 0.344219] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ KERNEL] [ 0.344405] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ KERNEL] [ 0.344615] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ KERNEL] [ 0.344810] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ KERNEL] [ 0.344828] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ KERNEL] [ 0.344844] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ KERNEL] [ 0.344853] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ KERNEL] [ 0.344994] acpi PNP0A03:00: host bridge window [io 0x0cf8-0x0cff] (ignored)
[ KERNEL] [ 0.345001] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7 window] (ignored)
[ KERNEL] [ 0.345004] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff window] (ignored)
[ KERNEL] [ 0.345007] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored)
[ KERNEL] [ 0.345011] acpi PNP0A03:00: host bridge window [mem 0x000c8000-0x000dffff window] (ignored)
[ KERNEL] [ 0.345014] acpi PNP0A03:00: host bridge window [mem 0x3f800000-0xfebfffff window] (ignored)
[ KERNEL] [ 0.345016] PCI: root bus 00: using default resources
[ KERNEL] [ 0.345469] PCI host bridge to bus 0000:00
[ KERNEL] [ 0.345480] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ KERNEL] [ 0.345484] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ KERNEL] [ 0.345488] pci_bus 0000:00: root bus resource [bus 00-ff]
[ KERNEL] [ 0.345516] pci 0000:00:00.0: [8086:2560] type 00 class 0x060000
[ KERNEL] [ 0.345539] pci 0000:00:00.0: reg 0x10: [mem 0xf0000000-0xf7ffffff pref]
[ KERNEL] [ 0.345972] pci 0000:00:02.0: [8086:2562] type 00 class 0x030000
[ KERNEL] [ 0.346004] pci 0000:00:02.0: reg 0x10: [mem 0xe8000000-0xefffffff pref]
[ KERNEL] [ 0.346016] pci 0000:00:02.0: reg 0x14: [mem 0xe7800000-0xe787ffff]
[ KERNEL] [ 0.346400] pci 0000:00:1d.0: [8086:24c2] type 00 class 0x0c0300
[ KERNEL] [ 0.346466] pci 0000:00:1d.0: reg 0x20: [io 0xd800-0xd81f]
[ KERNEL] [ 0.346804] pci 0000:00:1d.1: [8086:24c4] type 00 class 0x0c0300
[ KERNEL] [ 0.346870] pci 0000:00:1d.1: reg 0x20: [io 0xd400-0xd41f]
[ KERNEL] [ 0.347195] pci 0000:00:1d.2: [8086:24c7] type 00 class 0x0c0300
[ KERNEL] [ 0.347263] pci 0000:00:1d.2: reg 0x20: [io 0xd000-0xd01f]
[ KERNEL] [ 0.347607] pci 0000:00:1d.7: [8086:24cd] type 00 class 0x0c0320
[ KERNEL] [ 0.347643] pci 0000:00:1d.7: reg 0x10: [mem 0xe7000000-0xe70003ff]
[ KERNEL] [ 0.347773] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ KERNEL] [ 0.348073] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060400
[ KERNEL] [ 0.348442] pci 0000:00:1f.0: [8086:24c0] type 00 class 0x060100
[ KERNEL] [ 0.348454] * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
[ KERNEL] [ 0.348454] * this clock source is slow. If you are sure your timer does not have
[ KERNEL] [ 0.348454] * this bug, please use "acpi_pm_good" to disable the workaround
[ KERNEL] [ 0.348559] pci 0000:00:1f.0: quirk: [io 0xe400-0xe47f] claimed by ICH4 ACPI/GPIO/TCO
[ KERNEL] [ 0.348566] pci 0000:00:1f.0: quirk: [io 0xec00-0xec3f] claimed by ICH4 GPIO
[ KERNEL] [ 0.348575] pci 0000:00:1f.0: Enabled i801 SMBus device
[ KERNEL] [ 0.348865] pci 0000:00:1f.1: [8086:24cb] type 00 class 0x01018a
[ KERNEL] [ 0.348895] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
[ KERNEL] [ 0.348909] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
[ KERNEL] [ 0.348921] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
[ KERNEL] [ 0.348933] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
[ KERNEL] [ 0.348946] pci 0000:00:1f.1: reg 0x20: [io 0xf000-0xf00f]
[ KERNEL] [ 0.348958] pci 0000:00:1f.1: reg 0x24: [mem 0x00000000-0x000003ff]
[ KERNEL] [ 0.348974] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ KERNEL] [ 0.348977] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ KERNEL] [ 0.348980] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ KERNEL] [ 0.348983] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ KERNEL] [ 0.349276] pci 0000:00:1f.3: [8086:24c3] type 00 class 0x0c0500
[ KERNEL] [ 0.349342] pci 0000:00:1f.3: reg 0x20: [io 0xe800-0xe81f]
[ KERNEL] [ 0.349936] pci 0000:00:1f.5: [8086:24c5] type 00 class 0x040100
[ KERNEL] [ 0.349967] pci 0000:00:1f.5: reg 0x10: [io 0xa800-0xa8ff]
[ KERNEL] [ 0.349979] pci 0000:00:1f.5: reg 0x14: [io 0xa400-0xa43f]
[ KERNEL] [ 0.349992] pci 0000:00:1f.5: reg 0x18: [mem 0xe6000000-0xe60001ff]
[ KERNEL] [ 0.350004] pci 0000:00:1f.5: reg 0x1c: [mem 0xe5800000-0xe58000ff]
[ KERNEL] [ 0.350086] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ KERNEL] [ 0.350454] pci_bus 0000:02: extended config space not accessible
[ KERNEL] [ 0.350721] pci 0000:02:0d.0: [10ec:8139] type 00 class 0x020000
[ KERNEL] [ 0.350751] pci 0000:02:0d.0: reg 0x10: [io 0xb800-0xb8ff]
[ KERNEL] [ 0.350764] pci 0000:02:0d.0: reg 0x14: [mem 0xe6800000-0xe68000ff]
[ KERNEL] [ 0.350868] pci 0000:02:0d.0: supports D1 D2
[ KERNEL] [ 0.350871] pci 0000:02:0d.0: PME# supported from D1 D2 D3hot D3cold
[ KERNEL] [ 0.351352] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
[ KERNEL] [ 0.351363] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
[ KERNEL] [ 0.351371] pci 0000:00:1e.0: bridge window [mem 0xe6800000-0xe6ffffff]
[ KERNEL] [ 0.351379] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ KERNEL] [ 0.351382] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ KERNEL] [ 0.351398] pci_bus 0000:00: on NUMA node 0
[ KERNEL] [ 0.356378] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ KERNEL] [ 0.356383] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ KERNEL] [ 0.356393] pci 0000:00:02.0: vgaarb: bridge control possible
[ KERNEL] [ 0.356396] vgaarb: loaded
[ KERNEL] [ 0.356877] ACPI: bus type USB registered
[ KERNEL] [ 0.357117] usbcore: registered new interface driver usbfs
[ KERNEL] [ 0.357235] usbcore: registered new interface driver hub
[ KERNEL] [ 0.357304] usbcore: registered new device driver usb
[ KERNEL] [ 0.358234] pps_core: LinuxPPS API ver. 1 registered
[ KERNEL] [ 0.358238] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ KERNEL] [ 0.358348] PTP clock support registered
[ KERNEL] [ 0.358790] PCI: Using ACPI for IRQ routing
[ KERNEL] [ 0.358843] PCI: pci_cache_line_size set to 64 bytes
[ KERNEL] [ 0.358898] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ KERNEL] [ 0.358903] e820: reserve RAM buffer [mem 0x3f7fa000-0x3fffffff]
[ KERNEL] [ 0.361540] clocksource: Switched to clocksource tsc-early
[ KERNEL] [ 0.361540] pnp: PnP ACPI init
[ KERNEL] [ 0.361540] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ KERNEL] [ 0.361540] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ KERNEL] [ 0.361540] system 00:00: [mem 0x00100000-0x3f7fffff] could not be reserved
[ KERNEL] [ 0.361540] system 00:00: [mem 0xfec00000-0xfec000ff] could not be reserved
[ KERNEL] [ 0.361540] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ KERNEL] [ 0.361540] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ KERNEL] [ 0.361540] system 00:01: [io 0xe400-0xe47f] has been reserved
[ KERNEL] [ 0.361540] system 00:01: [io 0xe800-0xe81f] has been reserved
[ KERNEL] [ 0.361540] system 00:01: [io 0xec00-0xec3f] has been reserved
[ KERNEL] [ 0.361540] system 00:01: [io 0x04d6] has been reserved
[ KERNEL] [ 0.361540] system 00:01: [mem 0xfff80000-0xffffffff] could not be reserved
[ KERNEL] [ 0.361540] system 00:01: [mem 0xffb80000-0xffbfffff] has been reserved
[ KERNEL] [ 0.361540] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ KERNEL] [ 0.361540] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ KERNEL] [ 0.361540] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ KERNEL] [ 0.361540] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ KERNEL] [ 0.361769] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ KERNEL] [ 0.363532] pnp 00:05: [dma 3]
[ KERNEL] [ 0.364141] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
[ KERNEL] [ 0.365546] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ KERNEL] [ 0.366867] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ KERNEL] [ 0.368720] pnp 00:08: Plug and Play ACPI device, IDs PNPb02f (active)
[ KERNEL] [ 0.369027] system 00:09: [io 0x03f0-0x03f1] has been reserved
[ KERNEL] [ 0.369220] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ KERNEL] [ 0.369255] pnp: PnP ACPI: found 10 devices
[ KERNEL] [ 0.424525] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ KERNEL] [ 0.425226] pci 0000:00:1f.1: BAR 5: assigned [mem 0x40000000-0x400003ff]
[ KERNEL] [ 0.425239] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ KERNEL] [ 0.425245] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
[ KERNEL] [ 0.425252] pci 0000:00:1e.0: bridge window [mem 0xe6800000-0xe6ffffff]
[ KERNEL] [ 0.425266] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ KERNEL] [ 0.425270] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ KERNEL] [ 0.425273] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
[ KERNEL] [ 0.425277] pci_bus 0000:02: resource 1 [mem 0xe6800000-0xe6ffffff]
[ KERNEL] [ 0.425280] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ KERNEL] [ 0.425283] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[ KERNEL] [ 0.425424] NET: Registered protocol family 2
[ KERNEL] [ 0.425803] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[ KERNEL] [ 0.425818] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ KERNEL] [ 0.425853] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ KERNEL] [ 0.425917] TCP: Hash tables configured (established 8192 bind 8192)
[ KERNEL] [ 0.426111] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ KERNEL] [ 0.426147] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ KERNEL] [ 0.426401] NET: Registered protocol family 1
[ KERNEL] [ 0.426557] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ KERNEL] [ 0.427708] PCI: CLS 0 bytes, default 64
[ KERNEL] [ 1.561789] Initialise system trusted keyrings
[ KERNEL] [ 1.575829] workingset: timestamp_bits=30 max_order=18 bucket_order=0
[ KERNEL] [ 1.663833] Key type asymmetric registered
[ KERNEL] [ 1.663838] Asymmetric key parser 'x509' registered
[ KERNEL] [ 1.663867] bounce: pool size: 64 pages
[ KERNEL] [ 1.663924] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ KERNEL] [ 1.663930] io scheduler noop registered
[ KERNEL] [ 1.663933] io scheduler deadline registered (default)
[ KERNEL] [ 1.664592] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ KERNEL] [ 1.664624] ACPI: Power Button [PWRB]
[ KERNEL] [ 1.664804] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ KERNEL] [ 1.665178] ACPI: Power Button [PWRF]
[ KERNEL] [ 1.680538] zram: Added device: zram0
[ KERNEL] [ 1.683596] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ KERNEL] [ 1.683601] ehci-pci: EHCI PCI platform driver
[ KERNEL] [ 1.683912] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ KERNEL] [ 1.683935] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ KERNEL] [ 1.683960] ehci-pci 0000:00:1d.7: debug port 1
[ KERNEL] [ 1.687893] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ KERNEL] [ 1.735265] ehci-pci 0000:00:1d.7: irq 23, io mem 0xe7000000
[ KERNEL] [ 1.749634] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ KERNEL] [ 1.749783] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ KERNEL] [ 1.749789] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ KERNEL] [ 1.749792] usb usb1: Product: EHCI Host Controller
[ KERNEL] [ 1.749795] usb usb1: Manufacturer: Linux 4.19.114 ehci_hcd
[ KERNEL] [ 1.749798] usb usb1: SerialNumber: 0000:00:1d.7
[ KERNEL] [ 1.750341] hub 1-0:1.0: USB hub found
[ KERNEL] [ 1.750379] hub 1-0:1.0: 6 ports detected
[ KERNEL] [ 1.751142] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ KERNEL] [ 1.751146] ohci-pci: OHCI PCI platform driver
[ KERNEL] [ 1.751271] uhci_hcd: USB Universal Host Controller Interface driver
[ KERNEL] [ 1.751618] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ KERNEL] [ 1.751638] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ KERNEL] [ 1.751698] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000d800
[ KERNEL] [ 1.751846] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ KERNEL] [ 1.751851] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ KERNEL] [ 1.751854] usb usb2: Product: UHCI Host Controller
[ KERNEL] [ 1.751857] usb usb2: Manufacturer: Linux 4.19.114 uhci_hcd
[ KERNEL] [ 1.751860] usb usb2: SerialNumber: 0000:00:1d.0
[ KERNEL] [ 1.752413] hub 2-0:1.0: USB hub found
[ KERNEL] [ 1.752452] hub 2-0:1.0: 2 ports detected
[ KERNEL] [ 1.753271] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ KERNEL] [ 1.753292] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ KERNEL] [ 1.753364] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d400
[ KERNEL] [ 1.753511] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ KERNEL] [ 1.753515] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ KERNEL] [ 1.753519] usb usb3: Product: UHCI Host Controller
[ KERNEL] [ 1.753522] usb usb3: Manufacturer: Linux 4.19.114 uhci_hcd
[ KERNEL] [ 1.753524] usb usb3: SerialNumber: 0000:00:1d.1
[ KERNEL] [ 1.759822] hub 3-0:1.0: USB hub found
[ KERNEL] [ 1.759864] hub 3-0:1.0: 2 ports detected
[ KERNEL] [ 1.770292] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ KERNEL] [ 1.770322] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ KERNEL] [ 1.770385] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
[ KERNEL] [ 1.770972] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ KERNEL] [ 1.770978] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ KERNEL] [ 1.770981] usb usb4: Product: UHCI Host Controller
[ KERNEL] [ 1.770983] usb usb4: Manufacturer: Linux 4.19.114 uhci_hcd
[ KERNEL] [ 1.770986] usb usb4: SerialNumber: 0000:00:1d.2
[ KERNEL] [ 1.771537] hub 4-0:1.0: USB hub found
[ KERNEL] [ 1.771577] hub 4-0:1.0: 2 ports detected
[ KERNEL] [ 1.772770] i8042: PNP: No PS/2 controller found.
[ KERNEL] [ 1.772774] i8042: Probing ports directly.
[ KERNEL] [ 1.788502] serio: i8042 KBD port at 0x60,0x64 irq 1
[ KERNEL] [ 1.788529] serio: i8042 AUX port at 0x60,0x64 irq 12
[ KERNEL] [ 1.789121] hv_vmbus: registering driver hyperv_keyboard
[ KERNEL] [ 1.789378] mousedev: PS/2 mouse device common for all mice
[ KERNEL] [ 1.790824] usbcore: registered new interface driver synaptics_usb
[ KERNEL] [ 1.791251] usbcore: registered new interface driver usbtouchscreen
[ KERNEL] [ 1.791490] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ KERNEL] [ 1.792811] rtc_cmos 00:04: RTC can wake from S4
[ KERNEL] [ 1.819720] rtc_cmos 00:04: registered as rtc0
[ KERNEL] [ 1.819893] rtc_cmos 00:04: alarms up to one month, 242 bytes nvram
[ KERNEL] [ 1.821105] i801_smbus 0000:00:1f.3: SMBus using polling
[ KERNEL] [ 1.822036] cpufreq_nforce2: No nForce2 chipset
[ KERNEL] [ 1.822291] hidraw: raw HID events driver (C) Jiri Kosina
[ KERNEL] [ 1.823127] hv_vmbus: registering driver hid_hyperv
[ KERNEL] [ 1.824470] usbcore: registered new interface driver usbhid
[ KERNEL] [ 1.824474] usbhid: USB HID core driver
[ KERNEL] [ 1.826905] NET: Registered protocol family 17
[ KERNEL] [ 1.830005] mce: Using 4 MCE banks
[ KERNEL] [ 1.830017] Using IPI No-Shortcut mode
[ KERNEL] [ 1.830026] sched_clock: Marking stable (1827480392, 2123998)->(1833253084, -3648694)
[ KERNEL] [ 1.861048] Loading compiled-in X.509 certificates
[ KERNEL] [ 1.861395] rtc_cmos 00:04: setting system clock to 2020-04-15 05:44:55 UTC (1586929495)
[ KERNEL] [ 1.868158] Freeing unused kernel image memory: 3436K
[ KERNEL] [ 1.877824] Write protecting the kernel text: 4308k
[ KERNEL] [ 1.877863] Write protecting the kernel read-only data: 1332k
[ KERNEL] [ 1.877867] Run /init as init process
[ pfac] [ 2.186829] Run /sbin/initrd.
[ pfac] [ 2.186954] Ok, PID 699.
[ initrd] [ 2.189134] WTware 6.0.3 shell.
[ initrd] [ 2.190874] HTTP: IP 10.10.0.3, port 789, path '/wtware/', slash '/'.
[ KERNEL] [ 2.221626] usb 2-1: new low-speed USB device number 2 using uhci_hcd
[ KERNEL] [ 2.419569] usb 2-1: New USB device found, idVendor=2a7a, idProduct=6a18, bcdDevice= 0.01
[ KERNEL] [ 2.419576] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ KERNEL] [ 2.419579] usb 2-1: Product: CASUE USB Keyboard
[ KERNEL] [ 2.419582] usb 2-1: Manufacturer: CASUE
[ KERNEL] [ 2.455193] input: CASUE CASUE USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/0003:2A7A:6A18.0001/input/input5
[ KERNEL] [ 2.514708] hid-generic 0003:2A7A:6A18.0001: input,hidraw0: USB HID v1.10 Keyboard [CASUE CASUE USB Keyboard] on usb-0000:00:1d.0-1/input0
[ KERNEL] [ 2.542197] input: CASUE CASUE USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/0003:2A7A:6A18.0002/input/input6
[ KERNEL] [ 2.577628] tsc: Refined TSC clocksource calibration: 2017.968 MHz
[ KERNEL] [ 2.577644] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1d167bf050e, max_idle_ns: 440795283702 ns
[ KERNEL] [ 2.577670] clocksource: Switched to clocksource tsc
[ KERNEL] [ 2.601884] input: CASUE CASUE USB Keyboard System Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/0003:2A7A:6A18.0002/input/input7
[ KERNEL] [ 2.602369] hid-generic 0003:2A7A:6A18.0002: input,hidraw1: USB HID v1.10 Device [CASUE CASUE USB Keyboard] on usb-0000:00:1d.0-1/input1
[ initrd] [ 2.795589] Load Ethernet drivers.
[ initrd] [ 2.803579] modprobe 8139cp.
[ initrd] [ 2.810544] NIC module 8139cp.ko loaded.
[ KERNEL] [ 2.811519] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ KERNEL] [ 2.811532] 8139cp 0000:02:0d.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ initrd] [ 2.810756] modprobe 8139too.
[ KERNEL] [ 2.821029] 8139too: 8139too Fast Ethernet driver 0.9.28
[ initrd] [ 2.821861] NIC module 8139too.ko loaded.
[ KERNEL] [ 2.822547] 8139too 0000:02:0d.0 eth0: RealTek RTL8139 at 0x(ptrval), 00:11:2f:24:43:e4, IRQ 17
[ initrd] [ 2.841537] eth0: 10ec:8139. Apply WOL configuration.
[ KERNEL] [ 2.841961] 8139too 0000:02:0d.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ initrd] [ 2.843661] dhcp: 328 bytes from 10.10.0.1.
[ initrd] [ 2.843844] 00000000:0000013400000000001100000A0A00010A0A0077004300440134000002010600 ...4..............w.C.D.4......
[ initrd] [ 2.843998] 00000020:67458B6B00000000000000000A0A00770A0A00030000000000112F2443E40000 gE.k...........w........./$C...
[ initrd] [ 2.844146] 00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 2.844294] 00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 2.844444] 00000080:00000000000000002F362E302E332F7774776172652E68747470000000000000 ......../6.0.3/wtware.http......
[ initrd] [ 2.844593] 000000a0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 2.844741] 000000c0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 2.844911] 000000e0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 2.845093] 00000100:00000000000000006382536335010236040A0A00013304000151800104FFFFFF ........c.Sc5..6.....3...Q......
[ initrd] [ 2.845188] 00000120:0003040A0A000106040A0A00030F066B742E696E632A040A0A0001420931302E ...............kt.inc*.....B.10.
[ KERNEL] [ 3.193619] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[ KERNEL] [ 3.419583] usb 3-1: New USB device found, idVendor=2912, idProduct=0005, bcdDevice= 2.00
[ KERNEL] [ 3.419590] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ KERNEL] [ 3.419593] usb 3-1: Product: ATOL USB device
[ KERNEL] [ 3.419596] usb 3-1: Manufacturer: ATOL Group
[ KERNEL] [ 3.419599] usb 3-1: SerialNumber: 00552964
[ initrd] [ 3.847213] dhcp: 328 bytes from 10.10.0.1.
[ initrd] [ 3.847396] 00000000:0000013400000000001100000A0A00010A0A0077004300440134000002010600 ...4..............w.C.D.4......
[ initrd] [ 3.847852] 00000020:67458B6B00000000000000000A0A00770A0A00030000000000112F2443E40000 gE.k...........w........./$C...
[ initrd] [ 3.847962] 00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 3.848044] 00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 3.848124] 00000080:00000000000000002F362E302E332F7774776172652E68747470000000000000 ......../6.0.3/wtware.http......
[ initrd] [ 3.848203] 000000a0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 3.848285] 000000c0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 3.848365] 000000e0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 3.848450] 00000100:00000000000000006382536335010536040A0A00013304000151800104FFFFFF ........c.Sc5..6.....3...Q......
[ initrd] [ 3.848530] 00000120:0003040A0A000106040A0A00030F066B742E696E632A040A0A0001420931302E ...............kt.inc*.....B.10.
[ initrd] [ 3.848610] [DHCP] DHCP server address 10.10.0.1.
[ initrd] [ 3.848688] [DHCP] IP 10.10.0.119 mask 255.255.255.0.
[ initrd] [ 3.848765] [DHCP] Default gateway 10.10.0.1.
[ initrd] [ 3.848846] [DHCP] DNS 10.10.0.3.
[ initrd] [ 3.848923] [DHCP] NTP 10.10.0.1.
[ initrd] [ 3.849004] [DHCP] Domain kt.inc.
[ initrd] [ 3.849083] [DHCP] HTTP IP 10.10.0.3 already specified.
WTC listener is active.
WTC broadcast listener is active.
Send broadcast WTCU discover.
[ initrd] [ 3.851068] [HTTP] Download and unpack file /wtware/6.0.3/packages/lib6 from 10.10.0.3.
[ KERNEL] [ 4.244102] random: fast init done
[ KERNEL] [ 4.261672] usb 3-2: new low-speed USB device number 3 using uhci_hcd
[ KERNEL] [ 4.456437] usb 3-2: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00
[ KERNEL] [ 4.456445] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ KERNEL] [ 4.456449] usb 3-2: Product: USB Optical Mouse
[ KERNEL] [ 4.456451] usb 3-2: Manufacturer: PixArt
[ KERNEL] [ 4.475124] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/0003:093A:2510.0003/input/input9
[ KERNEL] [ 4.475812] hid-generic 0003:093A:2510.0003: input,hidraw2: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:1d.1-2/input0
[ initrd] [ 5.868056] PCI: C 04:01 8086:24c5 Multimedia controller Multimedia audio controller Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller.
[ initrd] [ 5.868291] PCI: C 06:04 8086:244e Bridge PCI bridge Intel Corporation 82801 PCI Bridge.
[ initrd] [ 5.868479] PCI: C 0c:05 8086:24c3 Serial bus controller SMBus Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller.
[ initrd] [ 5.868660] PCI: C 06 8086:2560 Bridge Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface.
[ initrd] [ 5.868841] PCI: C 01:01 8086:24cb Mass storage controller IDE interface Intel Corporation 82801DB (ICH4) IDE Controller.
[ initrd] [ 5.869028] PCI: C 0c:03 8086:24c7 Serial bus controller USB controller Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller.
[ initrd] [ 5.869212] PCI: C 0c:03 8086:24c2 Serial bus controller USB controller Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller.
[ initrd] [ 5.869395] PCI: C 02 10ec:8139 Network controller Realtek Semiconductor Co., Ltd. RTL-8100/8101L/8139 PCI Fast Ethernet Adapter.
[ initrd] [ 5.869577] PCI: C 03 8086:2562 Display controller Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device.
[ initrd] [ 5.869759] PCI: C 0c:03 8086:24cd Serial bus controller USB controller Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller.
[ initrd] [ 5.869942] PCI: C 06:01 8086:24c0 Bridge ISA bridge Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge.
[ initrd] [ 5.870130] PCI: C 0c:03 8086:24c4 Serial bus controller USB controller Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller.
[ initrd] [ 5.870733] usbwt.cpp ( 7): Read device "/sys/bus/usb/devices/2-1".
[ initrd] [ 5.871583] usbwt.cpp ( 7): Read device "/sys/bus/usb/devices/3-2".
[ initrd] [ 5.872757] usbwt.cpp ( 7): Read device "/sys/bus/usb/devices/3-1".
[ initrd] [ 5.897750] USB: 2a7a:6a18 .
[ initrd] [ 5.897954] USB: 093a:2510 Pixart Imaging, Inc. Optical Mouse.
[ initrd] [ 5.898133] USB: 2912:0005 .
[ initrd] [ 5.899161] Run '/sbin/httpd', log '/tmp/httpd.out', env '', pid ''.
[ pfac] [ 5.899756] Run /sbin/httpd.
[ pfac] [ 5.899884] Ok, PID 760.
[ initrd] [ 5.900162] [HTTP] Download config file /wtware/Everyone/source.wtc from 10.10.0.3.
[ initrd] [ 5.907728] [HTTP] Download config file /wtware/Everyone/list.wtc from 10.10.0.3.
[ initrd] [ 5.909990] [HTTP] Download config file /wtware/Terminals/00.11.2F.24.43.E4/config.wtc from 10.10.0.3.
[ httpd] [ 5.910360] Internal HTTP Server, WTware 6.0.3
[ initrd] [ 5.935548] [HTTP] Download config file /wtware/Terminals/00.11.2F.24.43.E4/wtware.lic from 10.10.0.3.
[ initrd] [ 5.936998] [HTTP] File not found.
/--- FILE "/tmp/config.wtc" -----------------------
| #video=radeon(F)
| video=i915(F)
| display=1920x1080, VGA
| disk = usb
| #printer=usb
| #scanner=on
| #ser2net = usb 2912:0005 57600, usb 2912:0005 57600
| ser2net = usb serial:00247857 57600, usb serial:00552964 57600
| extra = eou-x86-8520.zip
| sleep = 10,suspend
| autoshutdown = 240
| # Menu
| connection ts02
| next screen hidden
| connection ws100
| next screen hidden
| connection manual
Skip 'CLID'.
\----------------------------------------------------
[ initrd] [ 5.937754] [HTTP] Download config file /wtware/Everyone/all.wtc from 10.10.0.3.
/--- FILE "/tmp/all.wtc" -----------------------
| #
| # Общесистемный конфигурационный файл. Сюда удобно записывать
| # те параметры, которые имеют одинаковые значения для всех
| # терминалов.
| #
| # Например, если у вас только один терминальный сервер, в этом файле
| # надо написать:
| #
| # server=1.2.3.4
| #
| # Вместо 1.2.3.4 указать IP вашего терминального сервера. Все
| # терминалы будут знать, куда им подключаться.
| #
| clienthostname = TC-*IP2
| server=10.100.0.5
| domain = KOMESTRA
| clipboard = on
| bpp = 16
| #skin=kt
| animation_speed = 0
| background=3A6EA5,208030,7030C0,9E3535
| sleep = 10,suspend
| autoshutdown = 15
| turnoffmenu = always
| language = ru
| keyswitch = ctrl-shift
| #screenswitch = Win-Ctrl-N
| chrome_url=http://komestra.tomsk.ru
| chrome_mode = window
| #chrome_language = ru
| chrome_proxy=10.100.0.1:3128
\----------------------------------------------------
[ initrd] [ 5.940114] [HTTP] Download config file /wtware/Everyone/wtware.lic from 10.10.0.3.
[ initrd] [ 5.945838] [HTTP] Download config file /wtware/Connections/ts02.wtc from 10.10.0.3.
/--- FILE "/tmp/tmp.wtc" -----------------------
| displayname=TermServ02(New)
| server=10.100.0.6
\----------------------------------------------------
[ initrd] [ 5.948209] [HTTP] Download config file /wtware/Connections/ws100.wtc from 10.10.0.3.
/--- FILE "/tmp/tmp.wtc" -----------------------
| displayname=1Cv8 Komestra-Tom SCC
| server=10.100.0.100:8933
\----------------------------------------------------
[ initrd] [ 5.950266] [HTTP] Download config file /wtware/Connections/manual.wtc from 10.10.0.3.
/--- FILE "/tmp/tmp.wtc" -----------------------
| displayname=Enter server address
| server=--new--
\----------------------------------------------------
/--- FILE "/etc/config.compiled" -----------------------
| [BOM]
| clienthostname=TC-*IP2
| server=10.100.0.5
| domain=KOMESTRA
| clipboard=on
| bpp=16
| animation_speed=0
| background=3A6EA5,208030,7030C0,9E3535
| sleep=10,suspend
| autoshutdown=240
| turnoffmenu=always
| language=ru
| keyswitch=ctrl-shift
| chrome_url=http://komestra.tomsk.ru
| chrome_mode=window
| chrome_proxy=10.100.0.1:3128
| video=i915(F)
| display=1920x1080, VGA
| disk=usb
| ser2net=usb serial:00247857 57600, usb serial:00552964 57600
| extra=eou-x86-8520.zip
Skip 'CLID'.
| connection ts02
| displayname=TermServ02(New)
| server=10.100.0.6
| next screen hidden
| connection ws100
| displayname=1Cv8 Komestra-Tom SCC
| server=10.100.0.100:8933
| next screen hidden
| connection manual
| displayname=Enter server address
| server=--new--
\----------------------------------------------------
[ initrd] [ 5.952866] Hostname: "TC-0-119".
[ initrd] [ 5.956452] Run '/bin/sh /tmp/ntpdate', log '/tmp/ntp.out', env '', pid ''.
[ pfac] [ 5.957117] Run /bin/sh /tmp/ntpdate.
[ pfac] [ 5.957237] Ok, PID 761.
Everyone can control terminal by RSH.
RSH: listener is active.
Send broadcast WTCU discover.
[ httpd] [ 5.961458] Reread settings.
[ httpd] [ 5.961583] Everyone can control terminal by HTTP.
[ initrd] [ 5.963851] [HTTP] Download and unpack file /wtware/6.0.3/packages/f from 10.10.0.3.
[ NTP] [ 5.966453] ntpd: sending query to 10.10.0.1
[ NTP] [ 5.967147] ntpd: reply from 10.10.0.1: offset:+0.566929 delay:0.002000 status:0x24 strat:3 refid:0x3246c852 rootdelay:0.049668 reach:0x01
[ initrd] [ 6.378662] [HTTP] Download and unpack file /wtware/6.0.3/packages/fwt6 from 10.10.0.3.
[ initrd] [ 7.115446] [HTTP] Download and unpack file /wtware/6.0.3/packages/f-i915 from 10.10.0.3.
[ KERNEL] [ 7.693657] random: crng init done
[ initrd] [ 7.698113] [HTTP] Download and unpack file /wtware/6.0.3/packages/graphic from 10.10.0.3.
[ gm] [ 7.796431] WTware 6.0.3 session manager.
[ gm] [ 7.798148] Load agpgart driver.
[ gm] [ 7.798358] modprobe agpgart.
[ gm] [ 7.804758] modprobe intel-agp.
[ KERNEL] [ 7.805944] Linux agpgart interface v0.103
[ KERNEL] [ 7.815127] agpgart-intel 0000:00:00.0: Intel 845G Chipset
[ gm] [ 7.827987] EV_REL flag found. Add mouse event6: PixArt USB Optical Mouse.
[ KERNEL] [ 7.827878] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
[ gm] [ 7.828203] Add keyboard event5: CASUE CASUE USB Keyboard System Control.
[ gm] [ 7.828303] Add keyboard event4: CASUE CASUE USB Keyboard Consumer Control.
[ gm] [ 7.828401] Add keyboard event3: CASUE CASUE USB Keyboard.
[ gm] [ 7.828495] Ignore event2: PC Speaker.
[ gm] [ 7.828592] Add keyboard event1: Power Button.
[ gm] [ 7.828686] Add keyboard event0: Power Button.
[ gm] [ 7.828782] Display mode: 1920x1080, 16 bit, landscape, 0 Hz, modeline "", DDC enabled, connector 1.
[ NTP] [ 7.969571] ntpd: sending query to 10.10.0.1
[ NTP] [ 7.970581] ntpd: reply from 10.10.0.1: offset:+0.566989 delay:0.002000 status:0x24 strat:3 refid:0x3246c852 rootdelay:0.049668 reach:0x03
[ NTP] [ 7.974888] Wed Apr 15 05:45:01 2020 0.000000 seconds
[ pfac] [ 7.976048] Process pid 761 terminated, status 00000000.
[ gm] [ 8.039624] WTware concurrent licensing servers:
[ gm] [ 8.039776] 157.245.219.8
[ gm] [ 8.039876] 212.71.233.220
[ gm] [ 8.039973] 213.178.34.233
[ gm] [ 8.040067] 88.200.173.252
[ gm] [ 8.040163] 178.163.82.7
[ gm] [ 8.888580] 178.163.82.7 0
[ gm] [ 8.888808] 00000000:485454502F312E3120323030204F4B0D0A5365727665723A206E67696E782F31 HTTP/1.1 200 OK..Server: nginx/1
[ gm] [ 8.888996] 00000020:2E31302E330D0A446174653A205765642C203135204170722032303230203035 .10.3..Date: Wed, 15 Apr 2020 05
[ gm] [ 8.889178] 00000040:3A34353A303220474D540D0A436F6E74656E742D547970653A206170706C6963 :45:02 GMT..Content-Type: applic
[ gm] [ 8.889355] 00000060:6174696F6E2F782D7777772D666F726D2D75726C656E636F6465640D0A436F6E ation/x-www-form-urlencoded..Con
[ gm] [ 8.889528] 00000080:6E656374696F6E3A20636C6F73650D0A416C6C6F773A204745542C20504F5354 nection: close..Allow: GET, POST
[ gm] [ 8.889702] 000000a0:2C20484541440D0A0D0A39374335464332453335303738443039353636323239 , HEAD....97C5FC2E35078D09566229
[ gm] [ 8.889874] 000000c0:3345464337454242454233394131374236443036343531413235433537363334 3EFC7EBBEB39A17B6D06451A25C57634
[ gm] [ 8.890047] 000000e0:3738303534413941413645373738323832354335423330354438363445353731 78054A9AA6E7782825C5B305D864E571
[ gm] [ 8.890224] 00000100:3941303730414342323538323141304545393435463843443845393342313046 9A070ACB25821A0EE945F8CD8E93B10F
[ gm] [ 8.890401] 00000120:3038303032373736443839423835333635423544414241303444353844383832 08002776D89B85365B5DABA04D58D882
[ gm] [ 8.894550] modprobe drm.
[ gm] [ 8.909141] Run modprobe i915 modeset=1.
[ gm] [ 8.909287] modprobe i915 modeset=1.
[ KERNEL] [ 8.985201] agpgart-intel 0000:00:00.0: Intel 845G Chipset
[ KERNEL] [ 8.985230] agpgart-intel 0000:00:00.0: detected gtt size: 131072K total, 131072K mappable
[ KERNEL] [ 8.985321] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ KERNEL] [ 8.985370] [drm] Replacing VGA console driver
[ KERNEL] [ 8.985980] Console: switching to colour dummy device 80x25
[ KERNEL] [ 8.986238] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ KERNEL] [ 8.986241] [drm] Driver supports precise vblank timestamp query.
[ KERNEL] [ 8.986434] [drm:intel_bios_init [i915]] *ERROR* Unexpected child device config size 22 (expected 27 for VBT version 106)
[ KERNEL] [ 8.987629] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ KERNEL] [ 9.021511] [drm] RC6 disabled, disabling runtime PM support
[ KERNEL] [ 9.021969] [drm] Initialized overlay support.
[ KERNEL] [ 9.022019] [drm] PMU not supported for this GPU.
[ KERNEL] [ 9.022649] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
[ gm] [ 9.070929] Kernel drm/kms module loaded.
[ KERNEL] [ 9.071687] fbcon: inteldrmfb (fb0) is primary device
[ KERNEL] [ 9.071958] Console: switching to colour frame buffer device 240x67
[ KERNEL] [ 9.071987] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ gm] [ 9.096045] count_fbs 0.
[ gm] [ 9.096255] count_crtcs 1.
[ gm] [ 9.096436] count_connectors 1.
[ gm] [ 9.096616] count_encoders 1.
[ gm] [ 9.096794] min_width 0, max_width 2048, min_height 0, max_height 2048.
[ gm] [ 9.122082] ======================
[ gm] [ 9.122289] connector_id 33.
[ gm] [ 9.122469] encoder_id 34.
[ gm] [ 9.122652] connector_type VGA (1).
[ gm] [ 9.122830] connector_type_id 1.
[ gm] [ 9.123007] connection 1.
[ gm] [ 9.123183] mm_width 520, mm_height 290.
[ gm] [ 9.123361] subpixel 0.
[ gm] [ 9.123598] count_modes 8.
[ gm] [ 9.123790] count_props 4.
[ gm] [ 9.123967] count_encoders 1.
[ gm] [ 9.124144] encoders_ptr [34]
[ gm] [ 9.124319] ======================
[ gm] [ 9.124523] ======================
[ gm] [ 9.124707] crtc_id 32.
[ gm] [ 9.124888] fb buffer_id 0 (disconnected from fb).
[ gm] [ 9.125068] x 0, y 0.
[ gm] [ 9.125243] mode_valid 1.
[ gm] [ 9.125426] Mode 640x480: clock 25154 H 1 656 752 800 0 V 1 490 492 525 0 VR 60 flags 0x000a type 0x0040.
[ gm] [ 9.125606] gamma_size 256.
[ gm] [ 9.125855] 0 connectors.
[ gm] [ 9.125973] ======================
[ gm] [ 9.126066] ======================
[ gm] [ 9.126158] encoder_id 34.
[ gm] [ 9.126250] encoder_type DAC (1).
[ gm] [ 9.126343] crtc_id 32.
[ gm] [ 9.126436] possible_crtcs 1.
[ gm] [ 9.126527] possible_clones 1.
[ gm] [ 9.126620] ======================
/--- FILE "/proc/mtrr" -----------------------
| reg00: base=0x000000000 ( 0MB), size= 512MB, count=1: write-back
| reg01: base=0x020000000 ( 512MB), size= 512MB, count=1: write-back
| reg02: base=0x03f800000 ( 1016MB), size= 8MB, count=1: uncachable
| reg03: base=0x0f0000000 ( 3840MB), size= 128MB, count=1: write-combining
\----------------------------------------------------
[ gm] [ 9.127106] Connector Id 33.
[ gm] [ 9.152305] Encoder Id 34.
[ gm] [ 9.152534] CRTC Id 32.
[ gm] [ 9.152717] Force 60Hz refresh.
[ gm] [ 9.152908] Mode 1920x1080: clock 148500 H 1920 2008 2052 2200 0 V 1080 1084 1089 1125 0 VR 60 flags 0x0005 type 0x0048.
[ gm] [ 9.153087] ^^^ Use this mode ^^^.
[ gm] [ 9.153275] Mode 1680x1050: clock 146250 H 1680 1784 1960 2240 0 V 1050 1053 1059 1089 0 VR 60 flags 0x0006 type 0x0040.
[ gm] [ 9.153461] Mode 1280x1024: clock 108000 H 1280 1328 1440 1688 0 V 1024 1025 1028 1066 0 VR 60 flags 0x0005 type 0x0040.
[ gm] [ 9.153646] Mode 1440x900: clock 106500 H 1440 1520 1672 1904 0 V 900 903 909 934 0 VR 60 flags 0x0006 type 0x0040.
[ gm] [ 9.153832] Mode 1280x960: clock 108000 H 1280 1376 1488 1800 0 V 960 961 964 1000 0 VR 60 flags 0x0005 type 0x0040.
[ gm] [ 9.154022] Mode 1024x768: clock 65000 H 1024 1048 1184 1344 0 V 768 771 777 806 0 VR 60 flags 0x000a type 0x0040.
[ gm] [ 9.154209] Mode 800x600: clock 40000 H 800 840 968 1056 0 V 600 601 605 628 0 VR 60 flags 0x0005 type 0x0040.
[ gm] [ 9.154393] Mode 640x480: clock 25175 H 640 656 752 800 0 V 480 490 492 525 0 VR 60 flags 0x000a type 0x0040.
[ gm] [ 9.154569] Once more, choose this mode:
[ gm] [ 9.154758] Mode 1920x1080: clock 148500 H 1920 2008 2052 2200 0 V 1080 1084 1089 1125 0 VR 60 flags 0x0005 type 0x0048.
[ gm] [ 9.155047] fb_ptr 0xb7496000
[ gm] [ 9.155238] stride 3840.
[ gm] [ 9.163439] size 4147200.
[ gm] [ 9.163648] handle 0x00000001.
[ gm] [ 9.173291] ======================
[ gm] [ 9.173493] fb_id 0.
[ gm] [ 9.173672] width 1920.
[ gm] [ 9.173848] height 1080.
[ gm] [ 9.174024] pitch 3840.
[ gm] [ 9.174202] bpp 16.
[ gm] [ 9.174380] depth 16.
[ gm] [ 9.174558] handle 0x00000001.
[ gm] [ 9.174733] ======================
[ gm] [ 9.225039] LINELENBYTES 3840, VBUF 0x0xb7496000.
[ gm] [ 9.243781] Use /lib/ui16.so.
[ gm] [ 9.342633] WMEMCOPY: 40500K copied in 0.081549 sec.
[ gm] [ 9.426186] libc: 40500K copied in 0.083263 sec.
[ gm] [ 9.509669] movs: 40500K copied in 0.083200 sec.
[ gm] [ 9.591331] MMX: 40500K copied in 0.081400 sec.
[ gm] [ 9.673745] SSE2: 40500K copied in 0.082074 sec.
[ gm] [ 9.673982] Choose MMX memcpy.
[ gm] [ 9.682950] [HTTP] Download config file /wtware/Everyone/eou-x86-8520.zip from 10.10.0.3.
[ gm] [ 10.641871] +--- Executing "/bin/unzip -n -d / /tmp/extra-eou-x86-8520.zip"
[ gm] [ 10.952599] +- Errorlevel: 0, output:
| Archive: /tmp/extra-eou-x86-8520.zip
| inflating: runme
| creating: etc/ATOL/
| creating: etc/ATOL/EoU/
| inflating: etc/ATOL/EoU/libudev.so.0
| inflating: etc/ATOL/EoU/gconv-modules
| inflating: etc/ATOL/EoU/gconv-modules.cache
| inflating: etc/ATOL/EoU/ISO8859-1.so
| inflating: etc/ATOL/EoU/libQtCore.so.4
| inflating: etc/ATOL/EoU/libstdc++.so.6
| inflating: etc/ATOL/EoU/UTF-16.so
| inflating: etc/ATOL/EoU/libQtNetwork.so.4
| inflating: etc/ATOL/EoU/libglib-2.0.so.0
| inflating: etc/ATOL/EoU/settings.xml
| inflating: etc/ATOL/EoU/libQtXml.so.4
| inflating: etc/ATOL/EoU/EthOverUsb
| inflating: etc/ATOL/EoU/libusb-1.0.so.0
[ pfac] [ 10.954740] Run /bin/sh /runme2unix.
[ gm] [ 10.954825] +------------------------
[ pfac] [ 10.954911] Ok, PID 818.
[ gm] [ 10.954967] Run '/bin/sh /runme2unix', log '/tmp/extra.out', env '', pid ''.
[ gm] [ 10.955626] Load ISO 9660 and UDF CDROM filesystem drivers.
[ gm] [ 10.955772] modprobe udf.
[ gm] [ 10.968136] modprobe isofs.
[ gm] [ 10.985029] Load VFAT filesystem driver.
[ gm] [ 10.985193] modprobe fat.
[ gm] [ 11.017670] modprobe vfat.
[ gm] [ 11.028807] Load usb storage driver.
[ gm] [ 11.028964] modprobe scsi_mod.
[ EXTRA] [ 11.051057] 2020-04-15 05:45:04.691 INFO [EoU] Start service EoU (v8520)
[ gm] [ 11.067824] modprobe usb-storage.
[ KERNEL] [ 11.058147] SCSI subsystem initialized
[ EXTRA] [ 11.067984] 2020-04-15 05:45:04.695 INFO [EoU] Hotplug mode
[ gm] [ 11.084815] modprobe uas.
[ KERNEL] [ 11.085726] usbcore: registered new interface driver usb-storage
[ EXTRA] [ 11.097399] 2020-04-15 05:45:04.737 INFO [EoU] Register EoU worker [3-1]
[ gm] [ 11.105855] modprobe sd_mod.
[ KERNEL] [ 11.106779] usbcore: registered new interface driver uas
[ EXTRA] [ 11.115420] 2020-04-15 05:45:04.748 INFO [Ofd-3-1] pause
[ gm] [ 11.127634] Load usb <-> serial bridge drivers.
[ gm] [ 11.127787] usbwt.cpp ( 7): Read device "/sys/bus/usb/devices/2-1".
[ gm] [ 11.127894] usbwt.cpp ( 7): Read device "/sys/bus/usb/devices/3-2".
[ gm] [ 11.128712] usbwt.cpp ( 7): Read device "/sys/bus/usb/devices/3-1".
[ gm] [ 11.129787] modprobe usbserial.
[ gm] [ 11.157691] modprobe pl2303.
[ KERNEL] [ 11.158305] usbcore: registered new interface driver usbserial_generic
[ KERNEL] [ 11.158435] usbserial: USB Serial support registered for generic
[ KERNEL] [ 11.185504] usbcore: registered new interface driver pl2303
[ gm] [ 11.185629] modprobe ftdi_sio.
[ KERNEL] [ 11.186010] usbserial: USB Serial support registered for pl2303
[ EXTRA] [ 11.196188] 2020-04-15 05:45:04.836 INFO [USB-3-1] Open USB: 3-1
[ EXTRA] [ 11.206555] 2020-04-15 05:45:04.845 INFO [USB-3-1] SUCCESS
[ EXTRA] [ 11.206646] 2020-04-15 05:45:04.846 INFO [Ofd-3-1] continue
[ gm] [ 11.215842] modprobe cp210x.
[ KERNEL] [ 11.216078] usbcore: registered new interface driver ftdi_sio
[ KERNEL] [ 11.216234] usbserial: USB Serial support registered for FTDI USB Serial Device
[ gm] [ 11.241828] modprobe ch341.
[ KERNEL] [ 11.242309] usbcore: registered new interface driver cp210x
[ KERNEL] [ 11.242463] usbserial: USB Serial support registered for cp210x
[ gm] [ 11.267665] modprobe metro-usb.
[ KERNEL] [ 11.268097] usbcore: registered new interface driver ch341
[ KERNEL] [ 11.268237] usbserial: USB Serial support registered for ch341-uart
[ KERNEL] [ 11.292978] usbcore: registered new interface driver metro_usb
[ KERNEL] [ 11.293122] usbserial: USB Serial support registered for Metrologic USB to Serial
[ gm] [ 11.292826] modprobe symbolserial.
[ gm] [ 11.317661] modprobe opticon.
[ KERNEL] [ 11.318210] usbcore: registered new interface driver symbolserial
[ KERNEL] [ 11.318360] usbserial: USB Serial support registered for symbol
[ gm] [ 11.342642] modprobe cdc-acm.
[ KERNEL] [ 11.342306] usbcore: registered new interface driver opticon
[ KERNEL] [ 11.343361] usbserial: USB Serial support registered for opticon
[ KERNEL] [ 11.369078] cdc_acm 3-1:1.0: ttyACM0: USB ACM device
[ gm] [ 11.371234] modprobe mxu11x0.
[ KERNEL] [ 11.371873] cdc_acm: probe of 3-1:1.2 failed with error -16
[ KERNEL] [ 11.372022] usbcore: registered new interface driver cdc_acm
[ KERNEL] [ 11.372026] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ gm] [ 11.403669] modprobe ti_usb_3410_5052.
[ KERNEL] [ 11.403374] usbcore: registered new interface driver mxu11x0
[ KERNEL] [ 11.403541] usbserial: USB Serial support registered for MOXA UPort 1110
[ KERNEL] [ 11.403679] usbserial: USB Serial support registered for MOXA UPort 1130
[ KERNEL] [ 11.403821] usbserial: USB Serial support registered for MOXA UPort 1150
[ KERNEL] [ 11.403958] usbserial: USB Serial support registered for MOXA UPort 1150I
[ KERNEL] [ 11.404097] usbserial: USB Serial support registered for MOXA UPort 1130I
[ KERNEL] [ 11.404224] usbserial: USB Serial support registered for MOXA USB Console
[ KERNEL] [ 11.404246] mxu11x0: 1.3.13:MOXA UPort 11x0 USB to Serial Hub Driver
[ gm] [ 11.446019] Load EXFAT filesystem driver.
[ KERNEL] [ 11.446490] usbcore: registered new interface driver ti_usb_3410_5052
[ KERNEL] [ 11.446635] usbserial: USB Serial support registered for TI USB 3410 1 port adapter
[ KERNEL] [ 11.446763] usbserial: USB Serial support registered for TI USB 5052 2 port adapter
[ gm] [ 11.446473] [HTTP] Download and unpack file /wtware/6.0.3/packages/fs from 10.10.0.3.
[ gm] [ 11.753433] modprobe fuse.
[ gm] [ 11.774713] modprobe exfat.
[ KERNEL] [ 11.774853] fuse init (API version 7.27)
[ gm] [ 11.803574] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ KERNEL] [ 11.803210] exFAT: Version 1.2.9
[ gm] [ 11.833955] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 11.864488] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 11.894952] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 11.925430] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 11.955934] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 11.986372] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 12.016829] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 12.047288] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 12.077720] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 12.108180] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 12.138713] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 12.169141] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 12.199625] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 12.230109] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 12.260657] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 12.291129] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ EXTRA] [ 12.314893] 2020-04-15 05:45:05.954 INFO [Ofd-3-1] Command --> U2E_TLV_RX_REQUEST_VERSION
[ EXTRA] [ 12.317345] 2020-04-15 05:45:05.956 INFO [USB-3-1] read: 40 01 02 (3 bytes)
[ EXTRA] [ 12.318305] 2020-04-15 05:45:05.958 INFO [USB-3-1] write: 01 00 (2 bytes)
[ gm] [ 12.321578] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 12.351998] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 12.382549] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 12.413027] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 12.443551] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 12.473974] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 12.504451] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 12.534868] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 12.565361] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 12.595918] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 12.626387] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 12.656858] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 12.687321] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 12.717726] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 12.748205] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 12.778657] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 12.809120] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 12.839616] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 12.870043] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 12.900490] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 12.930979] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 12.961440] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 12.991937] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 13.022430] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 13.052893] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 13.083373] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 13.113849] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 13.144311] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 13.174785] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 13.205249] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 13.235762] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 13.266212] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 13.296696] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 13.327202] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 13.357689] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 13.388174] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ EXTRA] [ 13.405487] 2020-04-15 05:45:07.043 INFO [Ofd-3-1] Command --> U2E_TLV_RX_REQUEST_VERSION
[ EXTRA] [ 13.405571] 2020-04-15 05:45:07.045 INFO [Ofd-3-1] Command <-- U2E_TLV_TX_RESPONSE_VERSION
[ EXTRA] [ 13.408193] 2020-04-15 05:45:07.047 INFO [USB-3-1] read: 40 01 02 (3 bytes)
[ EXTRA] [ 13.409137] 2020-04-15 05:45:07.049 INFO [USB-3-1] write: 01 00 (2 bytes)
[ EXTRA] [ 13.412971] 2020-04-15 05:45:07.052 INFO [Ofd-3-1] Command <-- U2E_TLV_TX_RESPONSE_VERSION
[ gm] [ 13.418716] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 13.449198] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 13.479776] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 13.510262] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 13.540758] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 13.571275] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 13.601832] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 13.632307] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 13.662825] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 13.693300] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 13.723885] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 13.754331] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 13.784811] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 13.815258] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 13.845755] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 13.876252] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 13.906711] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 13.937201] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 13.967767] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 13.998257] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 14.028772] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 14.059244] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 14.089723] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 14.120201] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 14.150681] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 14.181147] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 14.211683] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 14.242169] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 14.272652] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 14.303139] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 14.333639] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 14.364075] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 14.394575] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 14.425100] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 14.455628] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 14.486106] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 14.516582] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 14.547011] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 14.577523] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 14.608040] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 14.638547] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 14.669012] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 14.699543] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 14.729909] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 14.760411] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 14.790909] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 14.821374] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
[ gm] [ 14.851936] [ser2net] USB <-> serial bridge with USB ID 0000:0000 serial number '00247857' not found.
[ gm] [ 14.852085] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00552964'.
/--- FILE "/etc/ser2net.conf" -----------------------
| 2002:raw:0:/dev/ttyACM0:57600
\----------------------------------------------------
[ gm] [ 14.853091] +--- Executing "/sbin/ser2net"
[SYSLOG] <29>Apr 15 05:45:08 ser2net[935]: ser2net startup
[ gm] [ 14.878009] +- Errorlevel: 0, output:
File is empty.
[ gm] [ 14.879687] +------------------------
[ pfac] [ 14.887306] Process pid 938 terminated, status 00000000.
[ gm] [ 14.924874] Run '/sbin/resolver 0x1f4f900 dns [10.100.0.6]', log '', env '', pid ''.
[ pfac] [ 14.925525] Run /sbin/resolver 0x1f4f900 dns [10.100.0.6].
[ pfac] [ 14.925662] Ok, PID 940.
[ gm] [ 14.926079] Nobody can control terminal by VNC.
[ gm] [ 14.926326] Nobody can control terminal by WTRC.
[ pfac] [ 14.937863] Process pid 940 terminated, status 00000000.
[ gm] [ 14.963678] Run '/sbin/resolver 0x1f86480 dns [10.100.0.100]', log '', env '', pid ''.
[ pfac] [ 14.964399] Run /sbin/resolver 0x1f86480 dns [10.100.0.100].
[ pfac] [ 14.964539] Ok, PID 941.
[ gm] [ 14.965868] Ask server address.
[ pfac] [ 14.976153] Process pid 941 terminated, status 00000000.
[ gm] [ 15.004814] 10.100.0.6 => 10.100.0.6.
[ gm] [ 15.006364] 10.100.0.100 => 10.100.0.100.
[ gm] [ 15.024695] Free ram before fork terminal client /sbin/rdpclient-SSE (session 1): 962128 Kb.
[ gm] [ 15.024938] Run '/sbin/rdpclient-SSE 1', log '/tmp/rdpclient.out', env '', pid ''.
[ pfac] [ 15.025652] Run /sbin/rdpclient-SSE 1.
[ pfac] [ 15.025793] Ok, PID 942.
[ rdpclient 942] [ 15.045760] RDP Terminal Client, WTware 6.0.3, pipe 1, pid 942.
[ rdpclient 942] [ 15.052131] Use /lib/ui16-SSE.so.
[ rdpclient 942] [ 15.054334] Make RDP session with 10.100.0.6, port 3389.
[ rdpclient 942] [ 15.054566] No username.
[ rdpclient 942] [ 15.054774] No password.
[ rdpclient 942] [ 15.055003] No PIN.
[ rdpclient 942] [ 15.055284] Domain: "KOMESTRA".
[ rdpclient 942] [ 15.055557] No shell.
[ rdpclient 942] [ 15.055798] No directory.
[ rdpclient 942] [ 15.056014] Window: 1920x1080@16.
[ rdpclient 942] [ 15.056310] PFlags 0x0000002F.
[ rdpclient 942] [ 15.057503] Keyboard 00000409:00000000.
[ rdpclient 942] [ 15.057722] My hostname "TC-0-119".
[ rdpclient 942] [ 15.057937] TCP: connecting to 10.100.0.6:3389.
[ rdpclient 942] [ 15.059933] TCP: connection with 10.100.0.6:3389 established.
[ rdpclient 942] [ 15.060167] Turn keepalive on.
[ rdpclient 942] [ 15.062661] Free ram after buffers allocation: 961288 KB.
[ gm] [ 15.068782] Free ram before fork terminal client /sbin/rdpclient-SSE (session 2): 961288 Kb.
[ rdpclient 942] [ 15.069402] Server supports GFX Pipeline.
[ rdpclient 942] [ 15.071791] Process RDP server certificate.
[ rdpclient 942] [ 15.071936] RDP5 encryption (X.509).
[ gm] [ 15.072435] Run '/sbin/rdpclient-SSE 2', log '/tmp/rdpclient.out', env '', pid ''.
[ pfac] [ 15.073474] Run /sbin/rdpclient-SSE 2.
[ pfac] [ 15.073619] Ok, PID 943.
[ rdpclient 942] [ 15.077596] Enable font smoothing and Desktop Composition.
[ rdpclient 943] [ 15.097059] RDP Terminal Client, WTware 6.0.3, pipe 2, pid 943.
[ rdpclient 943] [ 15.102066] Use /lib/ui16-SSE.so.
[ rdpclient 943] [ 15.104438] Make RDP session with 10.100.0.100, port 8933.
[ rdpclient 943] [ 15.106447] No username.
[ rdpclient 943] [ 15.106671] No password.
[ rdpclient 943] [ 15.106878] No PIN.
[ rdpclient 943] [ 15.107093] Domain: "KOMESTRA".
[ rdpclient 943] [ 15.107300] No shell.
[ rdpclient 943] [ 15.107670] No directory.
[ rdpclient 943] [ 15.107902] Window: 1920x1080@16.
[ rdpclient 943] [ 15.108123] PFlags 0x0000002F.
[ rdpclient 943] [ 15.108751] Keyboard 00000409:00000000.
[ rdpclient 943] [ 15.108973] My hostname "TC-0-119".
[ rdpclient 943] [ 15.109193] TCP: connecting to 10.100.0.100:8933.
[ rdpclient 943] [ 15.110984] TCP: connection with 10.100.0.100:8933 established.
[ rdpclient 943] [ 15.111215] Turn keepalive on.
[ rdpclient 943] [ 15.113141] Free ram after buffers allocation: 960380 KB.
[ rdpclient 943] [ 15.117827] Process RDP server certificate.
[ rdpclient 943] [ 15.118093] RDP5 encryption (X.509).
[ rdpclient 942] [ 15.328589] GFX codec.
[ rdpclient 942] [ 15.863086] Graphics output buffer 1920x1080, 1 monitors.
[ rdpclient 942] [ 15.869986] Monitor 0: 0.0-1919.1079 primary.
[ rdpclient 942] [ 16.203546] Run 1 tile threads.
[ rdpclient 942] [ 22.643824] TS_STATUS_FINDING_DESTINATION
[ gm] [ 22.644236] Do not display state after connection.
[ rdpclient 942] [ 22.699603] TS_STATUS_LOADING_DESTINATION
[ rdpclient 942] [ 22.700341] TS_STATUS_REDIRECTING_TO_DESTINATION
[ rdpclient 942] [ 23.366277] TS_STATUS_BRINGING_SESSION_ONLINE
[ rdpclient 942] [ 23.709388] errorInfo 0x00000000.
[ rdpclient 942] [ 24.255602] SessionId 0x00000014: KOMESTRA\user
Home
WTware diskless client.