WTware v.6.0.3
WTware 6.0.3 supervisor.
[ KERNEL] [ 0.000000] Linux version 4.19.114 (aka@c23) (gcc version 8.3.0 (Debian 8.3.0-6)) #15 SMP Mon Apr 13 17:25:14 EDT 2020
[ KERNEL] [ 0.000000] CPU0: Hyper-Threading is disabled
[ KERNEL] [ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ KERNEL] [ 0.000000] BIOS-provided physical RAM map:
[ KERNEL] [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ KERNEL] [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ KERNEL] [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ KERNEL] [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003f7f9fff] usable
[ KERNEL] [ 0.000000] BIOS-e820: [mem 0x000000003f7fa000-0x000000003f7fcfff] ACPI data
[ KERNEL] [ 0.000000] BIOS-e820: [mem 0x000000003f7fd000-0x000000003f7fdfff] ACPI NVS
[ KERNEL] [ 0.000000] BIOS-e820: [mem 0x000000003f7fe000-0x000000003f7fffff] reserved
[ KERNEL] [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ KERNEL] [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ KERNEL] [ 0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved
[ KERNEL] [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ KERNEL] [ 0.000000] SMBIOS 2.3 present.
[ KERNEL] [ 0.000000] DMI: System Manufacturer System Name/P4BP-MX, BIOS ASUS P4BP-MX ACPI BIOS Revision 1016 02/02/2004
[ KERNEL] [ 0.000000] tsc: Fast TSC calibration using PIT
[ KERNEL] [ 0.000000] tsc: Detected 2018.020 MHz processor
[ KERNEL] [ 0.017618] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ KERNEL] [ 0.017625] e820: remove [mem 0x000a0000-0x000fffff] usable
[ KERNEL] [ 0.017638] last_pfn = 0x3f7fa max_arch_pfn = 0x100000
[ KERNEL] [ 0.017652] MTRR default type: uncachable
[ KERNEL] [ 0.017654] MTRR fixed ranges enabled:
[ KERNEL] [ 0.017657] 00000-9FFFF write-back
[ KERNEL] [ 0.017659] A0000-BFFFF uncachable
[ KERNEL] [ 0.017661] C0000-C7FFF write-protect
[ KERNEL] [ 0.017663] C8000-EFFFF uncachable
[ KERNEL] [ 0.017666] F0000-FFFFF write-protect
[ KERNEL] [ 0.017668] MTRR variable ranges enabled:
[ KERNEL] [ 0.017671] 0 base 000000000 mask FE0000000 write-back
[ KERNEL] [ 0.017674] 1 base 020000000 mask FE0000000 write-back
[ KERNEL] [ 0.017676] 2 base 03F800000 mask FFF800000 uncachable
[ KERNEL] [ 0.017679] 3 base 0F0000000 mask FF8000000 write-combining
[ KERNEL] [ 0.017681] 4 disabled
[ KERNEL] [ 0.017682] 5 disabled
[ KERNEL] [ 0.017683] 6 disabled
[ KERNEL] [ 0.017685] 7 disabled
[ KERNEL] [ 0.017984] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ KERNEL] [ 0.040380] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ KERNEL] [ 0.040468] BRK [0x01977000, 0x01977fff] PGTABLE
[ KERNEL] [ 0.040527] ACPI: Early table checksum verification disabled
[ KERNEL] [ 0.042687] ACPI: RSDP 0x00000000000F5150 000014 (v00 ASUS )
[ KERNEL] [ 0.042695] ACPI: RSDT 0x000000003F7FA000 000030 (v01 ASUS P4BP-MX 42302E31 MSFT 31313031)
[ KERNEL] [ 0.042707] ACPI: FACP 0x000000003F7FA0C0 000074 (v01 ASUS P4BP-MX 42302E31 MSFT 31313031)
[ KERNEL] [ 0.042720] ACPI: DSDT 0x000000003F7FA134 002735 (v01 ASUS P4BP-MX 00001000 MSFT 0100000B)
[ KERNEL] [ 0.042728] ACPI: FACS 0x000000003F7FD000 000040
[ KERNEL] [ 0.042734] ACPI: BOOT 0x000000003F7FA030 000028 (v01 ASUS P4BP-MX 42302E31 MSFT 31313031)
[ KERNEL] [ 0.042742] ACPI: APIC 0x000000003F7FA058 00005A (v01 ASUS P4BP-MX 42302E31 MSFT 31313031)
[ KERNEL] [ 0.042776] ACPI: Local APIC address 0xfee00000
[ KERNEL] [ 0.042784] 131MB HIGHMEM available.
[ KERNEL] [ 0.042788] 883MB LOWMEM available.
[ KERNEL] [ 0.042790] mapped low ram: 0 - 373fe000
[ KERNEL] [ 0.042792] low ram: 0 - 373fe000
[ KERNEL] [ 0.042797] BRK [0x01978000, 0x01978fff] PGTABLE
[ KERNEL] [ 0.042807] Zone ranges:
[ KERNEL] [ 0.042811] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ KERNEL] [ 0.042815] Normal [mem 0x0000000001000000-0x00000000373fdfff]
[ KERNEL] [ 0.042818] HighMem [mem 0x00000000373fe000-0x000000003f7f9fff]
[ KERNEL] [ 0.042821] Movable zone start for each node
[ KERNEL] [ 0.042822] Early memory node ranges
[ KERNEL] [ 0.042824] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ KERNEL] [ 0.042827] node 0: [mem 0x0000000000100000-0x000000003f7f9fff]
[ KERNEL] [ 0.042830] Initmem setup node 0 [mem 0x0000000000001000-0x000000003f7f9fff]
[ KERNEL] [ 0.042834] On node 0 totalpages: 259992
[ KERNEL] [ 0.060102] DMA zone: 32 pages used for memmap
[ KERNEL] [ 0.060107] DMA zone: 0 pages reserved
[ KERNEL] [ 0.060110] DMA zone: 3998 pages, LIFO batch:0
[ KERNEL] [ 0.060362] Normal zone: 1736 pages used for memmap
[ KERNEL] [ 0.060366] Normal zone: 222206 pages, LIFO batch:63
[ KERNEL] [ 0.072543] HighMem zone: 33788 pages, LIFO batch:7
[ KERNEL] [ 0.074432] Using APIC driver default
[ KERNEL] [ 0.074456] Reserving Intel graphics memory at [mem 0x3f800000-0x3fffffff]
[ KERNEL] [ 0.074595] ACPI: PM-Timer IO Port: 0xe408
[ KERNEL] [ 0.074600] ACPI: Local APIC address 0xfee00000
[ KERNEL] [ 0.074615] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ KERNEL] [ 0.074630] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ KERNEL] [ 0.074636] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
[ KERNEL] [ 0.074641] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 22 low level)
[ KERNEL] [ 0.074644] ACPI: IRQ0 used by override.
[ KERNEL] [ 0.074647] ACPI: IRQ9 used by override.
[ KERNEL] [ 0.074652] Using ACPI (MADT) for SMP configuration information
[ KERNEL] [ 0.074660] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ KERNEL] [ 0.074693] [mem 0x40000000-0xfebfffff] available for PCI devices
[ KERNEL] [ 0.074698] Booting paravirtualized kernel on bare hardware
[ KERNEL] [ 0.074709] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ KERNEL] [ 0.074729] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:1 nr_node_ids:1
[ KERNEL] [ 0.075067] percpu: Embedded 27 pages/cpu s78988 r0 d31604 u110592
[ KERNEL] [ 0.075082] pcpu-alloc: s78988 r0 d31604 u110592 alloc=27*4096
[ KERNEL] [ 0.075086] pcpu-alloc: [0] 0
[ KERNEL] [ 0.075122] Built 1 zonelists, mobility grouping on. Total pages: 258224
[ KERNEL] [ 0.075129] Kernel command line: BOOT_IMAGE=http://10.10.0.3:789/wtware/6.0.3/packages/kernel quiet
[ KERNEL] [ 0.076137] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ KERNEL] [ 0.076680] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ KERNEL] [ 0.076719] Initializing CPU#0
[ KERNEL] [ 0.076745] Initializing HighMem for node 0 (000373fe:0003f7fa)
[ KERNEL] [ 0.096728] Initializing Movable for node 0 (00000000:00000000)
[ KERNEL] [ 0.110693] Memory: 1021120K/1039968K available (4305K kernel code, 219K rwdata, 1320K rodata, 3436K init, 300K bss, 18848K reserved, 0K cma-reserved, 135152K highmem)
[ KERNEL] [ 0.110708] virtual kernel memory layout:
[ KERNEL] [ 0.110708] fixmap : 0xfff65000 - 0xfffff000 ( 616 kB)
[ KERNEL] [ 0.110708] cpu_entry : 0xffc00000 - 0xffc9d000 ( 628 kB)
[ KERNEL] [ 0.110708] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ KERNEL] [ 0.110708] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ KERNEL] [ 0.110708] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ KERNEL] [ 0.110708] .init : 0xc15c4000 - 0xc191f000 (3436 kB)
[ KERNEL] [ 0.110708] .data : 0xc14345fd - 0xc15b8e40 (1554 kB)
[ KERNEL] [ 0.110708] .text : 0xc1000000 - 0xc14345fd (4305 kB)
[ KERNEL] [ 0.110711] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ KERNEL] [ 0.110887] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ KERNEL] [ 0.111004] rcu: Hierarchical RCU implementation.
[ KERNEL] [ 0.111009] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[ KERNEL] [ 0.111012] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ KERNEL] [ 0.111035] NR_IRQS: 2304, nr_irqs: 256, preallocated irqs: 16
[ KERNEL] [ 0.111343] CPU 0 irqstacks, hard=(ptrval) soft=(ptrval)
[ KERNEL] [ 0.113226] Console: colour VGA+ 80x25
[ KERNEL] [ 0.113245] console [tty0] enabled
[ KERNEL] [ 0.113267] ACPI: Core revision 20180810
[ KERNEL] [ 0.113487] APIC: Switch to symmetric I/O mode setup
[ KERNEL] [ 0.113495] Enabling APIC mode: Flat. Using 1 I/O APICs
[ KERNEL] [ 0.113968] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ KERNEL] [ 0.133485] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1d16ace5853, max_idle_ns: 440795225740 ns
[ KERNEL] [ 0.133523] Calibrating delay loop (skipped), value calculated using timer frequency.. 4036.04 BogoMIPS (lpj=8072080)
[ KERNEL] [ 0.133531] pid_max: default: 32768 minimum: 301
[ KERNEL] [ 0.133614] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ KERNEL] [ 0.133628] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ KERNEL] [ 0.134073] CPU0: Thermal monitoring enabled (TM1)
[ KERNEL] [ 0.134101] Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128
[ KERNEL] [ 0.134104] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64, 1GB 0
[ KERNEL] [ 0.134108] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ KERNEL] [ 0.134111] Spectre V2 : Spectre mitigation: kernel not compiled with retpoline; no mitigation available!
[ KERNEL] [ 0.134114] Speculative Store Bypass: Vulnerable
[ KERNEL] [ 0.134115] L1TF: Kernel not compiled for PAE. No mitigation for L1TF
[ KERNEL] [ 0.134181] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ KERNEL] [ 0.143816] Freeing SMP alternatives memory: 20K
[ KERNEL] [ 0.253902] smpboot: CPU0: Intel(R) Celeron(R) CPU 2.00GHz (family: 0xf, model: 0x2, stepping: 0x7)
[ KERNEL] [ 0.254374] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[ KERNEL] [ 0.254404] ... version: 0
[ KERNEL] [ 0.254407] ... bit width: 40
[ KERNEL] [ 0.254408] ... generic registers: 18
[ KERNEL] [ 0.254410] ... value mask: 000000ffffffffff
[ KERNEL] [ 0.254412] ... max period: 0000007fffffffff
[ KERNEL] [ 0.254413] ... fixed-purpose events: 0
[ KERNEL] [ 0.254414] ... event mask: 000000000003ffff
[ KERNEL] [ 0.254587] rcu: Hierarchical SRCU implementation.
[ KERNEL] [ 0.254948] smp: Bringing up secondary CPUs ...
[ KERNEL] [ 0.254953] smp: Brought up 1 node, 1 CPU
[ KERNEL] [ 0.254956] smpboot: Max logical packages: 1
[ KERNEL] [ 0.254959] smpboot: Total of 1 processors activated (4036.04 BogoMIPS)
[ KERNEL] [ 0.255633] devtmpfs: initialized
[ KERNEL] [ 0.255991] random: get_random_u32 called from bucket_table_alloc.isra.8+0x7d/0x160 with crng_init=0
[ KERNEL] [ 0.256207] PM: Registering ACPI NVS region [mem 0x3f7fd000-0x3f7fdfff] (4096 bytes)
[ KERNEL] [ 0.256372] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ KERNEL] [ 0.256386] futex hash table entries: 256 (order: 2, 16384 bytes)
[ KERNEL] [ 0.256455] pinctrl core: initialized pinctrl subsystem
[ KERNEL] [ 0.256731] NET: Registered protocol family 16
[ KERNEL] [ 0.257200] cpuidle: using governor ladder
[ KERNEL] [ 0.257207] cpuidle: using governor menu
[ KERNEL] [ 0.257290] Simple Boot Flag at 0x3a set to 0x80
[ KERNEL] [ 0.257315] ACPI: bus type PCI registered
[ KERNEL] [ 0.268954] PCI: PCI BIOS revision 2.10 entry at 0xf1d90, last bus=2
[ KERNEL] [ 0.268957] PCI: Using configuration type 1 for base access
[ KERNEL] [ 0.295985] ACPI: Added _OSI(Module Device)
[ KERNEL] [ 0.295989] ACPI: Added _OSI(Processor Device)
[ KERNEL] [ 0.295991] ACPI: Added _OSI(3.0 _SCP Extensions)
[ KERNEL] [ 0.295994] ACPI: Added _OSI(Processor Aggregator Device)
[ KERNEL] [ 0.295998] ACPI: Added _OSI(Linux-Dell-Video)
[ KERNEL] [ 0.296001] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ KERNEL] [ 0.299133] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ KERNEL] [ 0.304234] ACPI: Interpreter enabled
[ KERNEL] [ 0.304299] ACPI: (supports S0 S1 S3 S5)
[ KERNEL] [ 0.304303] ACPI: Using IOAPIC for interrupt routing
[ KERNEL] [ 0.304754] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ KERNEL] [ 0.305165] ACPI: Enabled 5 GPEs in block 00 to 1F
[ KERNEL] [ 0.342040] acpi LNXCPU:00: Invalid PBLK length [5]
[ KERNEL] [ 0.342526] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ KERNEL] [ 0.342734] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ KERNEL] [ 0.342937] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ KERNEL] [ 0.343141] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
[ KERNEL] [ 0.343329] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ KERNEL] [ 0.343515] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ KERNEL] [ 0.343701] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ KERNEL] [ 0.343914] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ KERNEL] [ 0.344101] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ KERNEL] [ 0.344118] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ KERNEL] [ 0.344134] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ KERNEL] [ 0.344143] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ KERNEL] [ 0.344280] acpi PNP0A03:00: host bridge window [io 0x0cf8-0x0cff] (ignored)
[ KERNEL] [ 0.344287] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7 window] (ignored)
[ KERNEL] [ 0.344290] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff window] (ignored)
[ KERNEL] [ 0.344293] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored)
[ KERNEL] [ 0.344296] acpi PNP0A03:00: host bridge window [mem 0x000c8000-0x000dffff window] (ignored)
[ KERNEL] [ 0.344300] acpi PNP0A03:00: host bridge window [mem 0x3f800000-0xfebfffff window] (ignored)
[ KERNEL] [ 0.344303] PCI: root bus 00: using default resources
[ KERNEL] [ 0.344682] PCI host bridge to bus 0000:00
[ KERNEL] [ 0.344693] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ KERNEL] [ 0.344697] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ KERNEL] [ 0.344702] pci_bus 0000:00: root bus resource [bus 00-ff]
[ KERNEL] [ 0.344729] pci 0000:00:00.0: [8086:2560] type 00 class 0x060000
[ KERNEL] [ 0.344751] pci 0000:00:00.0: reg 0x10: [mem 0xf0000000-0xf7ffffff pref]
[ KERNEL] [ 0.345100] pci 0000:00:02.0: [8086:2562] type 00 class 0x030000
[ KERNEL] [ 0.345133] pci 0000:00:02.0: reg 0x10: [mem 0xe8000000-0xefffffff pref]
[ KERNEL] [ 0.345144] pci 0000:00:02.0: reg 0x14: [mem 0xe7800000-0xe787ffff]
[ KERNEL] [ 0.345711] pci 0000:00:1d.0: [8086:24c2] type 00 class 0x0c0300
[ KERNEL] [ 0.345776] pci 0000:00:1d.0: reg 0x20: [io 0xd800-0xd81f]
[ KERNEL] [ 0.346132] pci 0000:00:1d.1: [8086:24c4] type 00 class 0x0c0300
[ KERNEL] [ 0.346199] pci 0000:00:1d.1: reg 0x20: [io 0xd400-0xd41f]
[ KERNEL] [ 0.346523] pci 0000:00:1d.2: [8086:24c7] type 00 class 0x0c0300
[ KERNEL] [ 0.346589] pci 0000:00:1d.2: reg 0x20: [io 0xd000-0xd01f]
[ KERNEL] [ 0.346933] pci 0000:00:1d.7: [8086:24cd] type 00 class 0x0c0320
[ KERNEL] [ 0.346972] pci 0000:00:1d.7: reg 0x10: [mem 0xe7000000-0xe70003ff]
[ KERNEL] [ 0.347102] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ KERNEL] [ 0.347541] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060400
[ KERNEL] [ 0.348048] pci 0000:00:1f.0: [8086:24c0] type 00 class 0x060100
[ KERNEL] [ 0.348059] * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
[ KERNEL] [ 0.348059] * this clock source is slow. If you are sure your timer does not have
[ KERNEL] [ 0.348059] * this bug, please use "acpi_pm_good" to disable the workaround
[ KERNEL] [ 0.348169] pci 0000:00:1f.0: quirk: [io 0xe400-0xe47f] claimed by ICH4 ACPI/GPIO/TCO
[ KERNEL] [ 0.348176] pci 0000:00:1f.0: quirk: [io 0xec00-0xec3f] claimed by ICH4 GPIO
[ KERNEL] [ 0.348184] pci 0000:00:1f.0: Enabled i801 SMBus device
[ KERNEL] [ 0.348613] pci 0000:00:1f.1: [8086:24cb] type 00 class 0x01018a
[ KERNEL] [ 0.348644] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
[ KERNEL] [ 0.348658] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
[ KERNEL] [ 0.348670] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
[ KERNEL] [ 0.348682] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
[ KERNEL] [ 0.348694] pci 0000:00:1f.1: reg 0x20: [io 0xf000-0xf00f]
[ KERNEL] [ 0.348707] pci 0000:00:1f.1: reg 0x24: [mem 0x00000000-0x000003ff]
[ KERNEL] [ 0.348723] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ KERNEL] [ 0.348726] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ KERNEL] [ 0.348729] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ KERNEL] [ 0.348732] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ KERNEL] [ 0.349116] pci 0000:00:1f.3: [8086:24c3] type 00 class 0x0c0500
[ KERNEL] [ 0.349181] pci 0000:00:1f.3: reg 0x20: [io 0xe800-0xe81f]
[ KERNEL] [ 0.349690] pci 0000:00:1f.5: [8086:24c5] type 00 class 0x040100
[ KERNEL] [ 0.349721] pci 0000:00:1f.5: reg 0x10: [io 0xa800-0xa8ff]
[ KERNEL] [ 0.349732] pci 0000:00:1f.5: reg 0x14: [io 0xa400-0xa43f]
[ KERNEL] [ 0.349745] pci 0000:00:1f.5: reg 0x18: [mem 0xe6000000-0xe60001ff]
[ KERNEL] [ 0.349756] pci 0000:00:1f.5: reg 0x1c: [mem 0xe5800000-0xe58000ff]
[ KERNEL] [ 0.349837] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ KERNEL] [ 0.350131] pci_bus 0000:02: extended config space not accessible
[ KERNEL] [ 0.350320] pci 0000:02:0d.0: [10ec:8139] type 00 class 0x020000
[ KERNEL] [ 0.350348] pci 0000:02:0d.0: reg 0x10: [io 0xb800-0xb8ff]
[ KERNEL] [ 0.350360] pci 0000:02:0d.0: reg 0x14: [mem 0xe6800000-0xe68000ff]
[ KERNEL] [ 0.350462] pci 0000:02:0d.0: supports D1 D2
[ KERNEL] [ 0.350467] pci 0000:02:0d.0: PME# supported from D1 D2 D3hot D3cold
[ KERNEL] [ 0.350706] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
[ KERNEL] [ 0.350716] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
[ KERNEL] [ 0.350723] pci 0000:00:1e.0: bridge window [mem 0xe6800000-0xe6ffffff]
[ KERNEL] [ 0.350731] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ KERNEL] [ 0.350734] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ KERNEL] [ 0.350751] pci_bus 0000:00: on NUMA node 0
[ KERNEL] [ 0.356020] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ KERNEL] [ 0.356026] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ KERNEL] [ 0.356035] pci 0000:00:02.0: vgaarb: bridge control possible
[ KERNEL] [ 0.356037] vgaarb: loaded
[ KERNEL] [ 0.356417] ACPI: bus type USB registered
[ KERNEL] [ 0.356655] usbcore: registered new interface driver usbfs
[ KERNEL] [ 0.356776] usbcore: registered new interface driver hub
[ KERNEL] [ 0.356845] usbcore: registered new device driver usb
[ KERNEL] [ 0.357417] pps_core: LinuxPPS API ver. 1 registered
[ KERNEL] [ 0.357421] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ KERNEL] [ 0.357675] PTP clock support registered
[ KERNEL] [ 0.358106] PCI: Using ACPI for IRQ routing
[ KERNEL] [ 0.358158] PCI: pci_cache_line_size set to 64 bytes
[ KERNEL] [ 0.358213] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ KERNEL] [ 0.358218] e820: reserve RAM buffer [mem 0x3f7fa000-0x3fffffff]
[ KERNEL] [ 0.361268] clocksource: Switched to clocksource tsc-early
[ KERNEL] [ 0.361462] pnp: PnP ACPI init
[ KERNEL] [ 0.361462] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ KERNEL] [ 0.361462] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ KERNEL] [ 0.361462] system 00:00: [mem 0x00100000-0x3f7fffff] could not be reserved
[ KERNEL] [ 0.361462] system 00:00: [mem 0xfec00000-0xfec000ff] could not be reserved
[ KERNEL] [ 0.361462] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ KERNEL] [ 0.361462] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ KERNEL] [ 0.361462] system 00:01: [io 0xe400-0xe47f] has been reserved
[ KERNEL] [ 0.361462] system 00:01: [io 0xe800-0xe81f] has been reserved
[ KERNEL] [ 0.361462] system 00:01: [io 0xec00-0xec3f] has been reserved
[ KERNEL] [ 0.361462] system 00:01: [io 0x04d6] has been reserved
[ KERNEL] [ 0.361462] system 00:01: [mem 0xfff80000-0xffffffff] could not be reserved
[ KERNEL] [ 0.361462] system 00:01: [mem 0xffb80000-0xffbfffff] has been reserved
[ KERNEL] [ 0.361462] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ KERNEL] [ 0.361462] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ KERNEL] [ 0.361462] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ KERNEL] [ 0.361921] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ KERNEL] [ 0.362138] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ KERNEL] [ 0.364454] pnp 00:05: [dma 3]
[ KERNEL] [ 0.364715] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
[ KERNEL] [ 0.365774] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ KERNEL] [ 0.366986] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ KERNEL] [ 0.369153] pnp 00:08: Plug and Play ACPI device, IDs PNPb02f (active)
[ KERNEL] [ 0.369470] system 00:09: [io 0x03f0-0x03f1] has been reserved
[ KERNEL] [ 0.369577] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ KERNEL] [ 0.369610] pnp: PnP ACPI: found 10 devices
[ KERNEL] [ 0.424281] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ KERNEL] [ 0.425643] pci 0000:00:1f.1: BAR 5: assigned [mem 0x40000000-0x400003ff]
[ KERNEL] [ 0.425657] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ KERNEL] [ 0.425662] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
[ KERNEL] [ 0.425670] pci 0000:00:1e.0: bridge window [mem 0xe6800000-0xe6ffffff]
[ KERNEL] [ 0.425683] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ KERNEL] [ 0.425687] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ KERNEL] [ 0.425691] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
[ KERNEL] [ 0.425694] pci_bus 0000:02: resource 1 [mem 0xe6800000-0xe6ffffff]
[ KERNEL] [ 0.425697] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ KERNEL] [ 0.425700] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[ KERNEL] [ 0.425845] NET: Registered protocol family 2
[ KERNEL] [ 0.426222] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[ KERNEL] [ 0.426236] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ KERNEL] [ 0.426272] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ KERNEL] [ 0.426334] TCP: Hash tables configured (established 8192 bind 8192)
[ KERNEL] [ 0.426528] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ KERNEL] [ 0.426564] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ KERNEL] [ 0.426745] NET: Registered protocol family 1
[ KERNEL] [ 0.426801] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ KERNEL] [ 0.428119] PCI: CLS 0 bytes, default 64
[ KERNEL] [ 1.563448] Initialise system trusted keyrings
[ KERNEL] [ 1.577783] workingset: timestamp_bits=30 max_order=18 bucket_order=0
[ KERNEL] [ 1.665433] Key type asymmetric registered
[ KERNEL] [ 1.665440] Asymmetric key parser 'x509' registered
[ KERNEL] [ 1.665476] bounce: pool size: 64 pages
[ KERNEL] [ 1.665621] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ KERNEL] [ 1.665627] io scheduler noop registered
[ KERNEL] [ 1.665629] io scheduler deadline registered (default)
[ KERNEL] [ 1.666451] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ KERNEL] [ 1.666485] ACPI: Power Button [PWRB]
[ KERNEL] [ 1.666660] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ KERNEL] [ 1.667024] ACPI: Power Button [PWRF]
[ KERNEL] [ 1.682418] zram: Added device: zram0
[ KERNEL] [ 1.684486] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ KERNEL] [ 1.684491] ehci-pci: EHCI PCI platform driver
[ KERNEL] [ 1.684801] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ KERNEL] [ 1.684824] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ KERNEL] [ 1.684848] ehci-pci 0000:00:1d.7: debug port 1
[ KERNEL] [ 1.688778] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ KERNEL] [ 1.734720] ehci-pci 0000:00:1d.7: irq 23, io mem 0xe7000000
[ KERNEL] [ 1.749555] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ KERNEL] [ 1.749698] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ KERNEL] [ 1.749704] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ KERNEL] [ 1.749708] usb usb1: Product: EHCI Host Controller
[ KERNEL] [ 1.749711] usb usb1: Manufacturer: Linux 4.19.114 ehci_hcd
[ KERNEL] [ 1.749714] usb usb1: SerialNumber: 0000:00:1d.7
[ KERNEL] [ 1.750262] hub 1-0:1.0: USB hub found
[ KERNEL] [ 1.750299] hub 1-0:1.0: 6 ports detected
[ KERNEL] [ 1.751058] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ KERNEL] [ 1.751062] ohci-pci: OHCI PCI platform driver
[ KERNEL] [ 1.751190] uhci_hcd: USB Universal Host Controller Interface driver
[ KERNEL] [ 1.751542] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ KERNEL] [ 1.751561] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ KERNEL] [ 1.751620] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000d800
[ KERNEL] [ 1.751773] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ KERNEL] [ 1.751778] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ KERNEL] [ 1.751781] usb usb2: Product: UHCI Host Controller
[ KERNEL] [ 1.751784] usb usb2: Manufacturer: Linux 4.19.114 uhci_hcd
[ KERNEL] [ 1.751787] usb usb2: SerialNumber: 0000:00:1d.0
[ KERNEL] [ 1.752340] hub 2-0:1.0: USB hub found
[ KERNEL] [ 1.752383] hub 2-0:1.0: 2 ports detected
[ KERNEL] [ 1.753198] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ KERNEL] [ 1.753220] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ KERNEL] [ 1.753290] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d400
[ KERNEL] [ 1.753441] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ KERNEL] [ 1.753445] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ KERNEL] [ 1.753448] usb usb3: Product: UHCI Host Controller
[ KERNEL] [ 1.753452] usb usb3: Manufacturer: Linux 4.19.114 uhci_hcd
[ KERNEL] [ 1.753454] usb usb3: SerialNumber: 0000:00:1d.1
[ KERNEL] [ 1.758772] hub 3-0:1.0: USB hub found
[ KERNEL] [ 1.758816] hub 3-0:1.0: 2 ports detected
[ KERNEL] [ 1.770898] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ KERNEL] [ 1.770927] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ KERNEL] [ 1.770991] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
[ KERNEL] [ 1.771696] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ KERNEL] [ 1.771701] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ KERNEL] [ 1.771704] usb usb4: Product: UHCI Host Controller
[ KERNEL] [ 1.771707] usb usb4: Manufacturer: Linux 4.19.114 uhci_hcd
[ KERNEL] [ 1.771710] usb usb4: SerialNumber: 0000:00:1d.2
[ KERNEL] [ 1.772261] hub 4-0:1.0: USB hub found
[ KERNEL] [ 1.772300] hub 4-0:1.0: 2 ports detected
[ KERNEL] [ 1.773495] i8042: PNP: No PS/2 controller found.
[ KERNEL] [ 1.773560] i8042: Probing ports directly.
[ KERNEL] [ 1.788516] serio: i8042 KBD port at 0x60,0x64 irq 1
[ KERNEL] [ 1.788544] serio: i8042 AUX port at 0x60,0x64 irq 12
[ KERNEL] [ 1.789053] hv_vmbus: registering driver hyperv_keyboard
[ KERNEL] [ 1.789309] mousedev: PS/2 mouse device common for all mice
[ KERNEL] [ 1.790758] usbcore: registered new interface driver synaptics_usb
[ KERNEL] [ 1.791200] usbcore: registered new interface driver usbtouchscreen
[ KERNEL] [ 1.791437] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ KERNEL] [ 1.792782] rtc_cmos 00:04: RTC can wake from S4
[ KERNEL] [ 1.793176] rtc_cmos 00:04: registered as rtc0
[ KERNEL] [ 1.821773] rtc_cmos 00:04: alarms up to one month, 242 bytes nvram
[ KERNEL] [ 1.822508] i801_smbus 0000:00:1f.3: SMBus using polling
[ KERNEL] [ 1.823860] cpufreq_nforce2: No nForce2 chipset
[ KERNEL] [ 1.824119] hidraw: raw HID events driver (C) Jiri Kosina
[ KERNEL] [ 1.824959] hv_vmbus: registering driver hid_hyperv
[ KERNEL] [ 1.826619] usbcore: registered new interface driver usbhid
[ KERNEL] [ 1.826623] usbhid: USB HID core driver
[ KERNEL] [ 1.828906] NET: Registered protocol family 17
[ KERNEL] [ 1.859076] mce: Using 4 MCE banks
[ KERNEL] [ 1.859089] Using IPI No-Shortcut mode
[ KERNEL] [ 1.859099] sched_clock: Marking stable (1855394503, 2122851)->(1860058950, -2541596)
[ KERNEL] [ 1.860081] Loading compiled-in X.509 certificates
[ KERNEL] [ 1.860415] rtc_cmos 00:04: setting system clock to 2020-04-15 05:54:13 UTC (1586930053)
[ KERNEL] [ 1.866909] Freeing unused kernel image memory: 3436K
[ KERNEL] [ 1.877703] Write protecting the kernel text: 4308k
[ KERNEL] [ 1.877743] Write protecting the kernel read-only data: 1332k
[ KERNEL] [ 1.877747] Run /init as init process
[ pfac] [ 2.186752] Run /sbin/initrd.
[ pfac] [ 2.186890] Ok, PID 699.
[ initrd] [ 2.189076] WTware 6.0.3 shell.
[ initrd] [ 2.190812] HTTP: IP 10.10.0.3, port 789, path '/wtware/', slash '/'.
[ KERNEL] [ 2.221540] usb 2-1: new low-speed USB device number 2 using uhci_hcd
[ KERNEL] [ 2.419484] usb 2-1: New USB device found, idVendor=2a7a, idProduct=6a18, bcdDevice= 0.01
[ KERNEL] [ 2.419492] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ KERNEL] [ 2.419495] usb 2-1: Product: CASUE USB Keyboard
[ KERNEL] [ 2.419498] usb 2-1: Manufacturer: CASUE
[ KERNEL] [ 2.455112] input: CASUE CASUE USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/0003:2A7A:6A18.0001/input/input5
[ KERNEL] [ 2.514653] hid-generic 0003:2A7A:6A18.0001: input,hidraw0: USB HID v1.10 Keyboard [CASUE CASUE USB Keyboard] on usb-0000:00:1d.0-1/input0
[ KERNEL] [ 2.542080] input: CASUE CASUE USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/0003:2A7A:6A18.0002/input/input6
[ KERNEL] [ 2.577540] tsc: Refined TSC clocksource calibration: 2017.968 MHz
[ KERNEL] [ 2.577555] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1d167bf050e, max_idle_ns: 440795283702 ns
[ KERNEL] [ 2.577581] clocksource: Switched to clocksource tsc
[ KERNEL] [ 2.601777] input: CASUE CASUE USB Keyboard System Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/0003:2A7A:6A18.0002/input/input7
[ KERNEL] [ 2.602256] hid-generic 0003:2A7A:6A18.0002: input,hidraw1: USB HID v1.10 Device [CASUE CASUE USB Keyboard] on usb-0000:00:1d.0-1/input1
[ initrd] [ 2.795511] Load Ethernet drivers.
[ initrd] [ 2.802982] modprobe 8139cp.
[ initrd] [ 2.809916] NIC module 8139cp.ko loaded.
[ KERNEL] [ 2.810911] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ KERNEL] [ 2.810925] 8139cp 0000:02:0d.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ initrd] [ 2.810133] modprobe 8139too.
[ KERNEL] [ 2.820129] 8139too: 8139too Fast Ethernet driver 0.9.28
[ KERNEL] [ 2.821239] 8139too 0000:02:0d.0 eth0: RealTek RTL8139 at 0x(ptrval), 00:11:2f:24:43:e4, IRQ 17
[ initrd] [ 2.820925] NIC module 8139too.ko loaded.
[ initrd] [ 2.839502] eth0: 10ec:8139. Apply WOL configuration.
[ KERNEL] [ 2.840674] 8139too 0000:02:0d.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ initrd] [ 2.841368] dhcp: 328 bytes from 10.10.0.1.
[ initrd] [ 2.841533] 00000000:0000013400000000001100000A0A00010A0A0077004300440134000002010600 ...4..............w.C.D.4......
[ initrd] [ 2.841684] 00000020:67458B6B00000000000000000A0A00770A0A00030000000000112F2443E40000 gE.k...........w........./$C...
[ initrd] [ 2.841828] 00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 2.841973] 00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 2.842115] 00000080:00000000000000002F362E302E332F7774776172652E68747470000000000000 ......../6.0.3/wtware.http......
[ initrd] [ 2.842259] 000000a0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 2.842407] 000000c0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 2.842579] 000000e0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 2.842734] 00000100:00000000000000006382536335010236040A0A00013304000151800104FFFFFF ........c.Sc5..6.....3...Q......
[ initrd] [ 2.842910] 00000120:0003040A0A000106040A0A00030F066B742E696E632A040A0A0001420931302E ...............kt.inc*.....B.10.
[ KERNEL] [ 3.269528] usb 2-2: new full-speed USB device number 3 using uhci_hcd
[ KERNEL] [ 3.491302] usb 2-2: New USB device found, idVendor=2912, idProduct=0005, bcdDevice= 2.00
[ KERNEL] [ 3.491309] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ KERNEL] [ 3.491312] usb 2-2: Product: ATOL USB device
[ KERNEL] [ 3.491315] usb 2-2: Manufacturer: ATOL Group
[ KERNEL] [ 3.491318] usb 2-2: SerialNumber: 00247857
[ initrd] [ 3.844885] dhcp: 328 bytes from 10.10.0.1.
[ initrd] [ 3.845068] 00000000:0000013400000000001100000A0A00010A0A0077004300440134000002010600 ...4..............w.C.D.4......
[ initrd] [ 3.845225] 00000020:67458B6B00000000000000000A0A00770A0A00030000000000112F2443E40000 gE.k...........w........./$C...
[ initrd] [ 3.845612] 00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 3.845722] 00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 3.845806] 00000080:00000000000000002F362E302E332F7774776172652E68747470000000000000 ......../6.0.3/wtware.http......
[ initrd] [ 3.845891] 000000a0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 3.845976] 000000c0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 3.846058] 000000e0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 3.846141] 00000100:00000000000000006382536335010536040A0A00013304000151800104FFFFFF ........c.Sc5..6.....3...Q......
[ initrd] [ 3.846224] 00000120:0003040A0A000106040A0A00030F066B742E696E632A040A0A0001420931302E ...............kt.inc*.....B.10.
[ initrd] [ 3.846305] [DHCP] DHCP server address 10.10.0.1.
[ initrd] [ 3.846387] [DHCP] IP 10.10.0.119 mask 255.255.255.0.
[ initrd] [ 3.846468] [DHCP] Default gateway 10.10.0.1.
[ initrd] [ 3.846549] [DHCP] DNS 10.10.0.3.
[ initrd] [ 3.846628] [DHCP] NTP 10.10.0.1.
[ initrd] [ 3.846707] [DHCP] Domain kt.inc.
[ initrd] [ 3.846788] [DHCP] HTTP IP 10.10.0.3 already specified.
WTC listener is active.
WTC broadcast listener is active.
Send broadcast WTCU discover.
[ initrd] [ 3.848678] [HTTP] Download and unpack file /wtware/6.0.3/packages/lib6 from 10.10.0.3.
[ KERNEL] [ 3.875453] random: fast init done
[ KERNEL] [ 4.237588] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[ KERNEL] [ 4.462598] usb 3-1: New USB device found, idVendor=2912, idProduct=0005, bcdDevice= 2.00
[ KERNEL] [ 4.462607] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ KERNEL] [ 4.462611] usb 3-1: Product: ATOL USB device
[ KERNEL] [ 4.462613] usb 3-1: Manufacturer: ATOL Group
[ KERNEL] [ 4.462616] usb 3-1: SerialNumber: 00552964
[ KERNEL] [ 5.253584] usb 3-2: new low-speed USB device number 3 using uhci_hcd
[ initrd] [ 5.311624] PCI: C 04:01 8086:24c5 Multimedia controller Multimedia audio controller Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller.
[ initrd] [ 5.311835] PCI: C 06:04 8086:244e Bridge PCI bridge Intel Corporation 82801 PCI Bridge.
[ initrd] [ 5.312021] PCI: C 0c:05 8086:24c3 Serial bus controller SMBus Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller.
[ initrd] [ 5.312229] PCI: C 06 8086:2560 Bridge Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface.
[ initrd] [ 5.312413] PCI: C 01:01 8086:24cb Mass storage controller IDE interface Intel Corporation 82801DB (ICH4) IDE Controller.
[ initrd] [ 5.312597] PCI: C 0c:03 8086:24c7 Serial bus controller USB controller Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller.
[ initrd] [ 5.312781] PCI: C 0c:03 8086:24c2 Serial bus controller USB controller Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller.
[ initrd] [ 5.312968] PCI: C 02 10ec:8139 Network controller Realtek Semiconductor Co., Ltd. RTL-8100/8101L/8139 PCI Fast Ethernet Adapter.
[ initrd] [ 5.313151] PCI: C 03 8086:2562 Display controller Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device.
[ initrd] [ 5.313337] PCI: C 0c:03 8086:24cd Serial bus controller USB controller Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller.
[ initrd] [ 5.313523] PCI: C 06:01 8086:24c0 Bridge ISA bridge Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge.
[ initrd] [ 5.313705] PCI: C 0c:03 8086:24c4 Serial bus controller USB controller Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller.
[ initrd] [ 5.314340] usbwt.cpp ( 7): Read device "/sys/bus/usb/devices/2-1".
[ initrd] [ 5.315714] usbwt.cpp ( 7): Read device "/sys/bus/usb/devices/2-2".
[ initrd] [ 5.316592] usbwt.cpp ( 7): Read device "/sys/bus/usb/devices/3-1".
[ initrd] [ 5.341391] USB: 2a7a:6a18 .
[ initrd] [ 5.341596] USB: 2912:0005 .
[ initrd] [ 5.342626] Run '/sbin/httpd', log '/tmp/httpd.out', env '', pid ''.
[ pfac] [ 5.343154] Run /sbin/httpd.
[ pfac] [ 5.343275] Ok, PID 756.
[ initrd] [ 5.343621] [HTTP] Download config file /wtware/Everyone/source.wtc from 10.10.0.3.
[ initrd] [ 5.345993] [HTTP] Download config file /wtware/Everyone/list.wtc from 10.10.0.3.
[ initrd] [ 5.348026] [HTTP] Download config file /wtware/Terminals/00.11.2F.24.43.E4/config.wtc from 10.10.0.3.
[ initrd] [ 5.350346] [HTTP] Download config file /wtware/Terminals/00.11.2F.24.43.E4/wtware.lic from 10.10.0.3.
[ initrd] [ 5.351927] [HTTP] File not found.
/--- FILE "/tmp/config.wtc" -----------------------
| #video=radeon(F)
| video=i915(F)
| display=1920x1080, VGA
| disk = usb
| #printer=usb
| #scanner=on
| #ser2net = usb 2912:0005 57600, usb 2912:0005 57600
| ser2net = usb serial:00247857 57600, usb serial:00552964 57600
| extra = eou-x86-8520.zip
| sleep = 10,suspend
| autoshutdown = 240
| # Menu
| connection ts02
| next screen hidden
| connection ws100
| next screen hidden
| connection manual
Skip 'CLID'.
\----------------------------------------------------
[ initrd] [ 5.352693] [HTTP] Download config file /wtware/Everyone/all.wtc from 10.10.0.3.
/--- FILE "/tmp/all.wtc" -----------------------
| #
| # Общесистемный конфигурационный файл. Сюда удобно записывать
| # те параметры, которые имеют одинаковые значения для всех
| # терминалов.
| #
| # Например, если у вас только один терминальный сервер, в этом файле
| # надо написать:
| #
| # server=1.2.3.4
| #
| # Вместо 1.2.3.4 указать IP вашего терминального сервера. Все
| # терминалы будут знать, куда им подключаться.
| #
| clienthostname = TC-*IP2
| server=10.100.0.5
| domain = KOMESTRA
| clipboard = on
| bpp = 16
| #skin=kt
| animation_speed = 0
| background=3A6EA5,208030,7030C0,9E3535
| sleep = 10,suspend
| autoshutdown = 15
| turnoffmenu = always
| language = ru
| keyswitch = ctrl-shift
| #screenswitch = Win-Ctrl-N
| chrome_url=http://komestra.tomsk.ru
| chrome_mode = window
| #chrome_language = ru
| chrome_proxy=10.100.0.1:3128
\----------------------------------------------------
[ initrd] [ 5.355123] [HTTP] Download config file /wtware/Everyone/wtware.lic from 10.10.0.3.
[ initrd] [ 5.361068] [HTTP] Download config file /wtware/Connections/ts02.wtc from 10.10.0.3.
[ httpd] [ 5.364453] Internal HTTP Server, WTware 6.0.3
/--- FILE "/tmp/tmp.wtc" -----------------------
| displayname=TermServ02(New)
| server=10.100.0.6
\----------------------------------------------------
[ initrd] [ 5.366118] [HTTP] Download config file /wtware/Connections/ws100.wtc from 10.10.0.3.
/--- FILE "/tmp/tmp.wtc" -----------------------
| displayname=1Cv8 Komestra-Tom SCC
| server=10.100.0.100:8933
\----------------------------------------------------
[ initrd] [ 5.368306] [HTTP] Download config file /wtware/Connections/manual.wtc from 10.10.0.3.
/--- FILE "/tmp/tmp.wtc" -----------------------
| displayname=Enter server address
| server=--new--
\----------------------------------------------------
/--- FILE "/etc/config.compiled" -----------------------
| [BOM]
| clienthostname=TC-*IP2
| server=10.100.0.5
| domain=KOMESTRA
| clipboard=on
| bpp=16
| animation_speed=0
| background=3A6EA5,208030,7030C0,9E3535
| sleep=10,suspend
| autoshutdown=240
| turnoffmenu=always
| language=ru
| keyswitch=ctrl-shift
| chrome_url=http://komestra.tomsk.ru
| chrome_mode=window
| chrome_proxy=10.100.0.1:3128
| video=i915(F)
| display=1920x1080, VGA
| disk=usb
| ser2net=usb serial:00247857 57600, usb serial:00552964 57600
| extra=eou-x86-8520.zip
Skip 'CLID'.
| connection ts02
| displayname=TermServ02(New)
| server=10.100.0.6
| next screen hidden
| connection ws100
| displayname=1Cv8 Komestra-Tom SCC
| server=10.100.0.100:8933
| next screen hidden
| connection manual
| displayname=Enter server address
| server=--new--
\----------------------------------------------------
[ initrd] [ 5.371502] Hostname: "TC-0-119".
[ initrd] [ 5.374454] Run '/bin/sh /tmp/ntpdate', log '/tmp/ntp.out', env '', pid ''.
[ pfac] [ 5.379933] Run /bin/sh /tmp/ntpdate.
[ pfac] [ 5.380058] Ok, PID 757.
Everyone can control terminal by RSH.
RSH: listener is active.
Send broadcast WTCU discover.
[ initrd] [ 5.386360] [HTTP] Download and unpack file /wtware/6.0.3/packages/f from 10.10.0.3.
[ httpd] [ 5.387670] Reread settings.
[ httpd] [ 5.388017] Everyone can control terminal by HTTP.
[ NTP] [ 5.393296] ntpd: sending query to 10.10.0.1
[ NTP] [ 5.399940] ntpd: reply from 10.10.0.1: offset:+0.996346 delay:0.003883 status:0x24 strat:3 refid:0x3246c852 rootdelay:0.049668 reach:0x01
[ KERNEL] [ 5.448401] usb 3-2: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00
[ KERNEL] [ 5.448409] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ KERNEL] [ 5.448412] usb 3-2: Product: USB Optical Mouse
[ KERNEL] [ 5.448415] usb 3-2: Manufacturer: PixArt
[ KERNEL] [ 5.469636] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/0003:093A:2510.0003/input/input9
[ KERNEL] [ 5.470296] hid-generic 0003:093A:2510.0003: input,hidraw2: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:1d.1-2/input0
[ initrd] [ 5.717399] [HTTP] Download and unpack file /wtware/6.0.3/packages/fwt6 from 10.10.0.3.
[ initrd] [ 6.165240] [HTTP] Download and unpack file /wtware/6.0.3/packages/f-i915 from 10.10.0.3.
[ initrd] [ 6.399745] [HTTP] Download and unpack file /wtware/6.0.3/packages/graphic from 10.10.0.3.
[ NTP] [ 6.401072] ntpd: sending query to 10.10.0.1
[ NTP] [ 6.402834] ntpd: reply from 10.10.0.1: offset:+0.998126 delay:0.002000 status:0x24 strat:3 refid:0x3246c852 rootdelay:0.049668 reach:0x03
[ NTP] [ 6.413335] Wed Apr 15 05:54:18 2020 0.000000 seconds
[ pfac] [ 6.419554] Process pid 757 terminated, status 00000000.
[ KERNEL] [ 6.528188] random: crng init done
[ gm] [ 6.536214] WTware 6.0.3 session manager.
[ gm] [ 6.537962] Load agpgart driver.
[ gm] [ 6.538188] modprobe agpgart.
[ gm] [ 6.544446] modprobe intel-agp.
[ KERNEL] [ 6.545624] Linux agpgart interface v0.103
[ KERNEL] [ 6.554947] agpgart-intel 0000:00:00.0: Intel 845G Chipset
[ gm] [ 6.567531] EV_REL flag found. Add mouse event6: PixArt USB Optical Mouse.
[ KERNEL] [ 6.567696] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
[ gm] [ 6.567726] Add keyboard event5: CASUE CASUE USB Keyboard System Control.
[ gm] [ 6.567829] Add keyboard event4: CASUE CASUE USB Keyboard Consumer Control.
[ gm] [ 6.567930] Add keyboard event3: CASUE CASUE USB Keyboard.
[ gm] [ 6.568029] Ignore event2: PC Speaker.
[ gm] [ 6.568127] Add keyboard event1: Power Button.
[ gm] [ 6.568225] Add keyboard event0: Power Button.
[ gm] [ 6.568324] Display mode: 1920x1080, 16 bit, landscape, 0 Hz, modeline "", DDC enabled, connector 1.
[ gm] [ 6.571103] WTware concurrent licensing servers:
[ gm] [ 6.571324] 212.71.233.220
[ gm] [ 6.571632] 213.178.34.233
[ gm] [ 6.571829] 88.200.173.252
[ gm] [ 6.572013] 178.163.82.7
[ gm] [ 6.572199] 157.245.219.8
[ gm] [ 7.396835] 178.163.82.7 0
[ gm] [ 7.397059] 00000000:485454502F312E3120323030204F4B0D0A5365727665723A206E67696E782F31 HTTP/1.1 200 OK..Server: nginx/1
[ gm] [ 7.397246] 00000020:2E31302E330D0A446174653A205765642C203135204170722032303230203035 .10.3..Date: Wed, 15 Apr 2020 05
[ gm] [ 7.397428] 00000040:3A35343A313920474D540D0A436F6E74656E742D547970653A206170706C6963 :54:19 GMT..Content-Type: applic
[ gm] [ 7.397609] 00000060:6174696F6E2F782D7777772D666F726D2D75726C656E636F6465640D0A436F6E ation/x-www-form-urlencoded..Con
[ gm] [ 7.397792] 00000080:6E656374696F6E3A20636C6F73650D0A416C6C6F773A204745542C20504F5354 nection: close..Allow: GET, POST
[ gm] [ 7.397975] 000000a0:2C20484541440D0A0D0A44344342463941333845394344364543353134423741 , HEAD....D4CBF9A38E9CD6EC514B7A
[ gm] [ 7.398156] 000000c0:4231363845343032454230463132373132353434354238303936313332313146 B168E402EB0F127125445B809613211F
[ gm] [ 7.398338] 000000e0:3344414641383336433633414143373433383133383742363932304136413444 3DAFA836C63AAC74381387B6920A6A4D
[ gm] [ 7.398520] 00000100:3246454631373838453831374131343131334145343231414530463034384644 2FEF1788E817A14113AE421AE0F048FD
[ gm] [ 7.398700] 00000120:3939303244313031443641303444433933354237374541304131323436344342 9902D101D6A04DC935B77EA0A12464CB
[ gm] [ 7.402868] modprobe drm.
[ gm] [ 7.417318] Run modprobe i915 modeset=1.
[ gm] [ 7.417467] modprobe i915 modeset=1.
[ KERNEL] [ 7.494382] agpgart-intel 0000:00:00.0: Intel 845G Chipset
[ KERNEL] [ 7.494409] agpgart-intel 0000:00:00.0: detected gtt size: 131072K total, 131072K mappable
[ KERNEL] [ 7.494497] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ KERNEL] [ 7.494544] [drm] Replacing VGA console driver
[ KERNEL] [ 7.494764] Console: switching to colour dummy device 80x25
[ KERNEL] [ 7.494990] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ KERNEL] [ 7.494993] [drm] Driver supports precise vblank timestamp query.
[ KERNEL] [ 7.495183] [drm:intel_bios_init [i915]] *ERROR* Unexpected child device config size 22 (expected 27 for VBT version 106)
[ KERNEL] [ 7.496356] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ KERNEL] [ 7.530007] [drm] RC6 disabled, disabling runtime PM support
[ KERNEL] [ 7.530232] [drm] Initialized overlay support.
[ KERNEL] [ 7.530278] [drm] PMU not supported for this GPU.
[ KERNEL] [ 7.530930] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
[ gm] [ 7.579662] Kernel drm/kms module loaded.
[ KERNEL] [ 7.580374] fbcon: inteldrmfb (fb0) is primary device
[ KERNEL] [ 7.580652] Console: switching to colour frame buffer device 240x67
[ KERNEL] [ 7.580683] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ gm] [ 7.604512] count_fbs 0.
[ gm] [ 7.604720] count_crtcs 1.
[ gm] [ 7.604898] count_connectors 1.
[ gm] [ 7.605073] count_encoders 1.
[ gm] [ 7.605249] min_width 0, max_width 2048, min_height 0, max_height 2048.
[ gm] [ 7.630823] ======================
[ gm] [ 7.631025] connector_id 33.
[ gm] [ 7.631201] encoder_id 34.
[ gm] [ 7.631429] connector_type VGA (1).
[ gm] [ 7.631683] connector_type_id 1.
[ gm] [ 7.631868] connection 1.
[ gm] [ 7.632044] mm_width 520, mm_height 290.
[ gm] [ 7.632222] subpixel 0.
[ gm] [ 7.632398] count_modes 8.
[ gm] [ 7.632572] count_props 4.
[ gm] [ 7.632748] count_encoders 1.
[ gm] [ 7.632922] encoders_ptr [34]
[ gm] [ 7.633093] ======================
[ gm] [ 7.633292] ======================
[ gm] [ 7.633469] crtc_id 32.
[ gm] [ 7.633646] fb buffer_id 0 (disconnected from fb).
[ gm] [ 7.633824] x 0, y 0.
[ gm] [ 7.634003] mode_valid 1.
[ gm] [ 7.634265] Mode 640x480: clock 25154 H 1 656 752 800 0 V 1 490 492 525 0 VR 60 flags 0x000a type 0x0040.
[ gm] [ 7.634384] gamma_size 256.
[ gm] [ 7.634481] 0 connectors.
[ gm] [ 7.634573] ======================
[ gm] [ 7.634667] ======================
[ gm] [ 7.634760] encoder_id 34.
[ gm] [ 7.634854] encoder_type DAC (1).
[ gm] [ 7.634949] crtc_id 32.
[ gm] [ 7.635042] possible_crtcs 1.
[ gm] [ 7.635138] possible_clones 1.
[ gm] [ 7.635231] ======================
/--- FILE "/proc/mtrr" -----------------------
| reg00: base=0x000000000 ( 0MB), size= 512MB, count=1: write-back
| reg01: base=0x020000000 ( 512MB), size= 512MB, count=1: write-back
| reg02: base=0x03f800000 ( 1016MB), size= 8MB, count=1: uncachable
| reg03: base=0x0f0000000 ( 3840MB), size= 128MB, count=1: write-combining
\----------------------------------------------------
[ gm] [ 7.635817] Connector Id 33.
[ gm] [ 7.661401] Encoder Id 34.
[ gm] [ 7.661623] CRTC Id 32.
[ gm] [ 7.661818] Force 60Hz refresh.
[ gm] [ 7.662012] Mode 1920x1080: clock 148500 H 1920 2008 2052 2200 0 V 1080 1084 1089 1125 0 VR 60 flags 0x0005 type 0x0048.
[ gm] [ 7.662190] ^^^ Use this mode ^^^.
[ gm] [ 7.662377] Mode 1680x1050: clock 146250 H 1680 1784 1960 2240 0 V 1050 1053 1059 1089 0 VR 60 flags 0x0006 type 0x0040.
[ gm] [ 7.662564] Mode 1280x1024: clock 108000 H 1280 1328 1440 1688 0 V 1024 1025 1028 1066 0 VR 60 flags 0x0005 type 0x0040.
[ gm] [ 7.662751] Mode 1440x900: clock 106500 H 1440 1520 1672 1904 0 V 900 903 909 934 0 VR 60 flags 0x0006 type 0x0040.
[ gm] [ 7.662939] Mode 1280x960: clock 108000 H 1280 1376 1488 1800 0 V 960 961 964 1000 0 VR 60 flags 0x0005 type 0x0040.
[ gm] [ 7.663128] Mode 1024x768: clock 65000 H 1024 1048 1184 1344 0 V 768 771 777 806 0 VR 60 flags 0x000a type 0x0040.
[ gm] [ 7.663337] Mode 800x600: clock 40000 H 800 840 968 1056 0 V 600 601 605 628 0 VR 60 flags 0x0005 type 0x0040.
[ gm] [ 7.663615] Mode 640x480: clock 25175 H 640 656 752 800 0 V 480 490 492 525 0 VR 60 flags 0x000a type 0x0040.
[ gm] [ 7.663796] Once more, choose this mode:
[ gm] [ 7.663985] Mode 1920x1080: clock 148500 H 1920 2008 2052 2200 0 V 1080 1084 1089 1125 0 VR 60 flags 0x0005 type 0x0048.
[ gm] [ 7.664259] fb_ptr 0xb74b7000
[ gm] [ 7.672599] stride 3840.
[ gm] [ 7.672752] size 4147200.
[ gm] [ 7.672847] handle 0x00000001.
[ gm] [ 7.682480] ======================
[ gm] [ 7.682680] fb_id 0.
[ gm] [ 7.682856] width 1920.
[ gm] [ 7.683033] height 1080.
[ gm] [ 7.683209] pitch 3840.
[ gm] [ 7.683427] bpp 16.
[ gm] [ 7.683638] depth 16.
[ gm] [ 7.683820] handle 0x00000001.
[ gm] [ 7.683995] ======================
[ gm] [ 7.732951] LINELENBYTES 3840, VBUF 0x0xb74b7000.
[ gm] [ 7.751635] Use /lib/ui16.so.
[ gm] [ 7.842464] WMEMCOPY: 40500K copied in 0.073734 sec.
[ gm] [ 7.918322] libc: 40500K copied in 0.075575 sec.
[ gm] [ 7.993800] movs: 40500K copied in 0.075201 sec.
[ gm] [ 8.067789] MMX: 40500K copied in 0.073709 sec.
[ gm] [ 8.143013] SSE2: 40500K copied in 0.074945 sec.
[ gm] [ 8.143237] Choose MMX memcpy.
[ gm] [ 8.151268] [HTTP] Download config file /wtware/Everyone/eou-x86-8520.zip from 10.10.0.3.
[ gm] [ 8.793633] +--- Executing "/bin/unzip -n -d / /tmp/extra-eou-x86-8520.zip"
[ gm] [ 9.106991] +- Errorlevel: 0, output:
| Archive: /tmp/extra-eou-x86-8520.zip
| inflating: runme
| creating: etc/ATOL/
| creating: etc/ATOL/EoU/
| inflating: etc/ATOL/EoU/libudev.so.0
| inflating: etc/ATOL/EoU/gconv-modules
| inflating: etc/ATOL/EoU/gconv-modules.cache
| inflating: etc/ATOL/EoU/ISO8859-1.so
| inflating: etc/ATOL/EoU/libQtCore.so.4
| inflating: etc/ATOL/EoU/libstdc++.so.6
| inflating: etc/ATOL/EoU/UTF-16.so
| inflating: etc/ATOL/EoU/libQtNetwork.so.4
| inflating: etc/ATOL/EoU/libglib-2.0.so.0
| inflating: etc/ATOL/EoU/settings.xml
| inflating: etc/ATOL/EoU/libQtXml.so.4
| inflating: etc/ATOL/EoU/EthOverUsb
| inflating: etc/ATOL/EoU/libusb-1.0.so.0
[ pfac] [ 9.109306] Run /bin/sh /runme2unix.
[ gm] [ 9.109410] +------------------------
[ pfac] [ 9.109518] Ok, PID 824.
[ gm] [ 9.109582] Run '/bin/sh /runme2unix', log '/tmp/extra.out', env '', pid ''.
[ gm] [ 9.110491] Load ISO 9660 and UDF CDROM filesystem drivers.
[ gm] [ 9.110646] modprobe udf.
[ gm] [ 9.133944] modprobe isofs.
[ gm] [ 9.147101] Load VFAT filesystem driver.
[ gm] [ 9.147251] modprobe fat.
[ gm] [ 9.166069] modprobe vfat.
[ gm] [ 9.188732] Load usb storage driver.
[ gm] [ 9.188894] modprobe scsi_mod.
[ EXTRA] [ 9.207162] 2020-04-15 05:54:20.848 INFO [EoU] Start service EoU (v8520)
[ gm] [ 9.209175] modprobe usb-storage.
[ KERNEL] [ 9.210004] SCSI subsystem initialized
[ EXTRA] [ 9.225468] 2020-04-15 05:54:20.853 INFO [EoU] Hotplug mode
[ gm] [ 9.240717] modprobe uas.
[ KERNEL] [ 9.241643] usbcore: registered new interface driver usb-storage
[ gm] [ 9.261332] modprobe sd_mod.
[ KERNEL] [ 9.262253] usbcore: registered new interface driver uas
[ EXTRA] [ 9.273179] 2020-04-15 05:54:20.914 INFO [EoU] Register EoU worker [3-1]
[ gm] [ 9.283548] Load usb <-> serial bridge drivers.
[ gm] [ 9.283707] usbwt.cpp ( 7): Read device "/sys/bus/usb/devices/2-1".
[ gm] [ 9.283819] usbwt.cpp ( 7): Read device "/sys/bus/usb/devices/3-2".
[ gm] [ 9.284395] usbwt.cpp ( 7): Read device "/sys/bus/usb/devices/2-2".
[ gm] [ 9.285344] usbwt.cpp ( 7): Read device "/sys/bus/usb/devices/3-1".
[ gm] [ 9.286328] modprobe usbserial.
[ EXTRA] [ 9.299752] 2020-04-15 05:54:20.932 INFO [Ofd-3-1] pause
[ EXTRA] [ 9.299834] 2020-04-15 05:54:20.937 INFO [EoU] Register EoU worker [2-2]
[ EXTRA] [ 9.299872] 2020-04-15 05:54:20.940 INFO [Ofd-2-2] pause
[ gm] [ 9.314898] modprobe pl2303.
[ KERNEL] [ 9.314505] usbcore: registered new interface driver usbserial_generic
[ KERNEL] [ 9.315615] usbserial: USB Serial support registered for generic
[ gm] [ 9.343149] modprobe ftdi_sio.
[ KERNEL] [ 9.343720] usbcore: registered new interface driver pl2303
[ KERNEL] [ 9.343862] usbserial: USB Serial support registered for pl2303
[ KERNEL] [ 9.376951] usbcore: registered new interface driver ftdi_sio
[ KERNEL] [ 9.377097] usbserial: USB Serial support registered for FTDI USB Serial Device
[ gm] [ 9.377049] modprobe cp210x.
[ gm] [ 9.405895] modprobe ch341.
[ KERNEL] [ 9.406397] usbcore: registered new interface driver cp210x
[ KERNEL] [ 9.406539] usbserial: USB Serial support registered for cp210x
[ gm] [ 9.435710] modprobe metro-usb.
[ KERNEL] [ 9.436044] usbcore: registered new interface driver ch341
[ KERNEL] [ 9.436199] usbserial: USB Serial support registered for ch341-uart
[ KERNEL] [ 9.460806] usbcore: registered new interface driver metro_usb
[ KERNEL] [ 9.460945] usbserial: USB Serial support registered for Metrologic USB to Serial
[ gm] [ 9.460692] modprobe symbolserial.
[ EXTRA] [ 9.477893] 2020-04-15 05:54:21.118 INFO [USB-3-1] Open USB: 3-1
[ EXTRA] [ 9.480529] 2020-04-15 05:54:21.120 INFO [USB-2-2] Open USB: 2-2
[ EXTRA] [ 9.483674] 2020-04-15 05:54:21.122 INFO [USB-3-1] SUCCESS
[ EXTRA] [ 9.485882] 2020-04-15 05:54:21.126 INFO [Ofd-3-1] continue
[ EXTRA] [ 9.493033] 2020-04-15 05:54:21.134 INFO [USB-2-2] SUCCESS
[ EXTRA] [ 9.496075] 2020-04-15 05:54:21.136 INFO [Ofd-2-2] continue
[ KERNEL] [ 9.500537] usbcore: registered new interface driver symbolserial
[ gm] [ 9.502008] modprobe opticon.
[ KERNEL] [ 9.501972] usbserial: USB Serial support registered for symbol
[ KERNEL] [ 9.537239] usbcore: registered new interface driver opticon
[ KERNEL] [ 9.537392] usbserial: USB Serial support registered for opticon
[ gm] [ 9.539066] modprobe cdc-acm.
[ KERNEL] [ 9.575024] cdc_acm 2-2:1.0: ttyACM0: USB ACM device
[ KERNEL] [ 9.578239] cdc_acm: probe of 2-2:1.2 failed with error -16
[ KERNEL] [ 9.578488] cdc_acm 3-1:1.0: ttyACM1: USB ACM device
[ KERNEL] [ 9.581157] cdc_acm: probe of 3-1:1.2 failed with error -16
[ KERNEL] [ 9.581297] usbcore: registered new interface driver cdc_acm
[ KERNEL] [ 9.581301] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ gm] [ 9.581347] modprobe mxu11x0.
[ KERNEL] [ 9.632377] usbcore: registered new interface driver mxu11x0
[ KERNEL] [ 9.632535] usbserial: USB Serial support registered for MOXA UPort 1110
[ KERNEL] [ 9.632660] usbserial: USB Serial support registered for MOXA UPort 1130
[ KERNEL] [ 9.632788] usbserial: USB Serial support registered for MOXA UPort 1150
[ KERNEL] [ 9.632916] usbserial: USB Serial support registered for MOXA UPort 1150I
[ KERNEL] [ 9.633041] usbserial: USB Serial support registered for MOXA UPort 1130I
[ KERNEL] [ 9.633169] usbserial: USB Serial support registered for MOXA USB Console
[ KERNEL] [ 9.633195] mxu11x0: 1.3.13:MOXA UPort 11x0 USB to Serial Hub Driver
[ gm] [ 9.633231] modprobe ti_usb_3410_5052.
[ KERNEL] [ 9.684555] usbcore: registered new interface driver ti_usb_3410_5052
[ KERNEL] [ 9.684698] usbserial: USB Serial support registered for TI USB 3410 1 port adapter
[ KERNEL] [ 9.685005] usbserial: USB Serial support registered for TI USB 5052 2 port adapter
[ gm] [ 9.684583] Load EXFAT filesystem driver.
[ gm] [ 9.684733] [HTTP] Download and unpack file /wtware/6.0.3/packages/fs from 10.10.0.3.
[ gm] [ 10.081373] modprobe fuse.
[ KERNEL] [ 10.112451] fuse init (API version 7.27)
[ gm] [ 10.113472] modprobe exfat.
[ gm] [ 10.152232] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00247857'.
[ KERNEL] [ 10.152279] exFAT: Version 1.2.9
[ gm] [ 10.152449] usbwt.cpp ( 288): ttyUSB0 => 2912:0005, serial '00247857'.
[ gm] [ 10.153139] usbwt.cpp ( 288): ttyUSB1 => 2912:0005, serial '00552964'.
/--- FILE "/etc/ser2net.conf" -----------------------
| 2001:raw:0:/dev/ttyACM0:57600
| 2002:raw:0:/dev/ttyACM1:57600
\----------------------------------------------------
[ gm] [ 10.154203] +--- Executing "/sbin/ser2net"
[SYSLOG] <29>Apr 15 05:54:21 ser2net[946]: ser2net startup
[ gm] [ 10.227192] +- Errorlevel: 0, output:
File is empty.
[ gm] [ 10.231630] +------------------------
[ pfac] [ 10.236703] Process pid 951 terminated, status 00000000.
[ gm] [ 10.291248] Run '/sbin/resolver 0x1110900 dns [10.100.0.6]', log '', env '', pid ''.
[ pfac] [ 10.294179] Run /sbin/resolver 0x1110900 dns [10.100.0.6].
[ pfac] [ 10.294308] Ok, PID 953.
[ gm] [ 10.294586] Nobody can control terminal by VNC.
[ gm] [ 10.294947] Nobody can control terminal by WTRC.
[ pfac] [ 10.309995] Process pid 953 terminated, status 00000000.
[ gm] [ 10.349348] Run '/sbin/resolver 0x1147480 dns [10.100.0.100]', log '', env '', pid ''.
[ pfac] [ 10.351977] Run /sbin/resolver 0x1147480 dns [10.100.0.100].
[ pfac] [ 10.352123] Ok, PID 954.
[ gm] [ 10.352736] Ask server address.
[ pfac] [ 10.367473] Process pid 954 terminated, status 00000000.
[ gm] [ 10.412035] 10.100.0.6 => 10.100.0.6.
[ gm] [ 10.413809] 10.100.0.100 => 10.100.0.100.
[ gm] [ 10.440326] Free ram before fork terminal client /sbin/rdpclient-SSE (session 1): 961608 Kb.
[ gm] [ 10.441772] Run '/sbin/rdpclient-SSE 1', log '/tmp/rdpclient.out', env '', pid ''.
[ pfac] [ 10.442406] Run /sbin/rdpclient-SSE 1.
[ pfac] [ 10.442550] Ok, PID 955.
[ rdpclient 955] [ 10.474928] RDP Terminal Client, WTware 6.0.3, pipe 1, pid 955.
[ rdpclient 955] [ 10.480081] Use /lib/ui16-SSE.so.
[ rdpclient 955] [ 10.483364] Make RDP session with 10.100.0.6, port 3389.
[ rdpclient 955] [ 10.484208] No username.
[ rdpclient 955] [ 10.484554] No password.
[ rdpclient 955] [ 10.484773] No PIN.
[ rdpclient 955] [ 10.484984] Domain: "KOMESTRA".
[ rdpclient 955] [ 10.485300] No shell.
[ rdpclient 955] [ 10.485515] No directory.
[ rdpclient 955] [ 10.486807] Window: 1920x1080@16.
[ rdpclient 955] [ 10.487051] PFlags 0x0000002F.
[ rdpclient 955] [ 10.487277] Keyboard 00000409:00000000.
[ rdpclient 955] [ 10.488783] My hostname "TC-0-119".
[ rdpclient 955] [ 10.489876] TCP: connecting to 10.100.0.6:3389.
[ rdpclient 955] [ 10.491347] TCP: connection with 10.100.0.6:3389 established.
[ rdpclient 955] [ 10.491688] Turn keepalive on.
[ rdpclient 955] [ 10.494345] Free ram after buffers allocation: 960796 KB.
[ rdpclient 955] [ 10.502465] Server supports GFX Pipeline.
[ gm] [ 10.504452] Free ram before fork terminal client /sbin/rdpclient-SSE (session 2): 960768 Kb.
[ rdpclient 955] [ 10.505428] Process RDP server certificate.
[ rdpclient 955] [ 10.505701] RDP5 encryption (X.509).
[ gm] [ 10.507436] Run '/sbin/rdpclient-SSE 2', log '/tmp/rdpclient.out', env '', pid ''.
[ pfac] [ 10.508879] Run /sbin/rdpclient-SSE 2.
[ pfac] [ 10.509027] Ok, PID 956.
[ rdpclient 955] [ 10.511540] Enable font smoothing and Desktop Composition.
[ rdpclient 956] [ 10.544219] RDP Terminal Client, WTware 6.0.3, pipe 2, pid 956.
[ rdpclient 956] [ 10.549081] Use /lib/ui16-SSE.so.
[ rdpclient 956] [ 10.555678] Make RDP session with 10.100.0.100, port 8933.
[ rdpclient 956] [ 10.555922] No username.
[ rdpclient 956] [ 10.556143] No password.
[ rdpclient 956] [ 10.556478] No PIN.
[ rdpclient 956] [ 10.556716] Domain: "KOMESTRA".
[ rdpclient 956] [ 10.556939] No shell.
[ rdpclient 956] [ 10.557158] No directory.
[ rdpclient 956] [ 10.557409] Window: 1920x1080@16.
[ rdpclient 956] [ 10.557770] PFlags 0x0000002F.
[ rdpclient 956] [ 10.558001] Keyboard 00000409:00000000.
[ rdpclient 956] [ 10.558225] My hostname "TC-0-119".
[ rdpclient 956] [ 10.559574] TCP: connecting to 10.100.0.100:8933.
[ rdpclient 956] [ 10.562130] TCP: connection with 10.100.0.100:8933 established.
[ rdpclient 956] [ 10.562377] Turn keepalive on.
[ rdpclient 956] [ 10.567002] Free ram after buffers allocation: 959900 KB.
[ rdpclient 956] [ 10.571759] Process RDP server certificate.
[ rdpclient 956] [ 10.572132] RDP5 encryption (X.509).
[ EXTRA] [ 10.622552] 2020-04-15 05:54:22.263 INFO [Ofd-3-1] Command --> U2E_TLV_RX_REQUEST_VERSION
[ EXTRA] [ 10.627506] 2020-04-15 05:54:22.268 INFO [USB-3-1] write: 01 00 (2 bytes)
[ EXTRA] [ 10.633216] 2020-04-15 05:54:22.273 INFO [Ofd-2-2] Command --> U2E_TLV_RX_REQUEST_VERSION
[ EXTRA] [ 10.635640] 2020-04-15 05:54:22.276 INFO [USB-2-2] read: 40 01 02 (3 bytes)
[ EXTRA] [ 10.637470] 2020-04-15 05:54:22.278 INFO [USB-3-1] read: 40 01 02 (3 bytes)
[ EXTRA] [ 10.639808] 2020-04-15 05:54:22.280 INFO [USB-2-2] write: 01 00 (2 bytes)
[ rdpclient 955] [ 10.653096] GFX codec.
[ EXTRA] [ 11.645586] 2020-04-15 05:54:23.285 INFO [USB-2-2] read: 60 02 6D 52 70 14 6F 66 64 70 2E 70 6C 61 74 66 6F 72 6D 61 6F 66 64 2E 72 75 (26 bytes)
[ rdpclient 955] [ 11.673355] Graphics output buffer 1920x1080, 1 monitors.
[ rdpclient 955] [ 11.688245] Monitor 0: 0.0-1919.1079 primary.
[ EXTRA] [ 11.733836] 2020-04-15 05:54:23.373 INFO [Ofd-3-1] Command --> U2E_TLV_RX_REQUEST_VERSION
[ EXTRA] [ 11.733925] 2020-04-15 05:54:23.374 INFO [Ofd-3-1] Command <-- U2E_TLV_TX_RESPONSE_VERSION
[ EXTRA] [ 11.737035] 2020-04-15 05:54:23.377 INFO [USB-3-1] read: 40 01 02 (3 bytes)
[ EXTRA] [ 11.738458] 2020-04-15 05:54:23.379 INFO [USB-3-1] write: 01 00 (2 bytes)
[ EXTRA] [ 11.741949] 2020-04-15 05:54:23.383 INFO [Ofd-3-1] Command <-- U2E_TLV_TX_RESPONSE_VERSION
[ EXTRA] [ 11.747561] 2020-04-15 05:54:23.386 INFO [Ofd-2-2] Command --> U2E_TLV_RX_REQUEST_VERSION
[ EXTRA] [ 11.747648] 2020-04-15 05:54:23.387 INFO [Ofd-2-2] Command <-- U2E_TLV_TX_RESPONSE_VERSION
[ EXTRA] [ 11.748321] 2020-04-15 05:54:23.388 INFO [Ofd-2-2] Command <-- U2E_TLV_TX_PORT0
[ EXTRA] [ 11.752507] 2020-04-15 05:54:23.391 INFO [Ofd-2-2] Command <-- U2E_TLV_TX_CONNECT0
[ EXTRA] [ 11.753859] 2020-04-15 05:54:23.392 INFO [USB-2-2] read: 40 01 02 (3 bytes)
[ EXTRA] [ 11.754563] 2020-04-15 05:54:23.393 INFO [USB-2-2] write: 01 00 (2 bytes)
[ EXTRA] [ 11.759193] 2020-04-15 05:54:23.400 INFO [Ofd-2-2] Connect to ofdp.platformaofd.ru:21101
[ EXTRA] [ 11.778595] 2020-04-15 05:54:23.419 INFO [TCP0-2-2] Found address: 185.170.204.91
[ EXTRA] [ 11.838767] 2020-04-15 05:54:23.477 INFO [TCP0-2-2] Connect to 185.170.204.91 established
[ EXTRA] [ 11.838855] 2020-04-15 05:54:23.478 INFO [Ofd-2-2] Command <-- U2E_TLV_TX_RESPONSE_VERSION
[ EXTRA] [ 11.838893] 2020-04-15 05:54:23.479 INFO [Ofd-2-2] Command --> U2E_TLV_RX_CONNECT_STATE0
[ EXTRA] [ 11.841556] 2020-04-15 05:54:23.482 INFO [USB-2-2] write: 10 01 01 (3 bytes)
[ rdpclient 955] [ 12.179894] Run 1 tile threads.
[ EXTRA] [ 12.758421] 2020-04-15 05:54:24.398 INFO [USB-2-2] read: 90 32 A8 E0 AE A2 AD A0 B3 04 0C 00 32 34 35 39 30 34 31 37 30 32 37 38 B9 04 01 00 02 A4 04 04 00 31 32 34 35 A5 04 01 00 02 81 06 31 55 ED DF 0F 66 00 00 (52 bytes)
[ EXTRA] [ 12.763548] 2020-04-15 05:54:24.401 INFO [Ofd-2-2] Command <-- U2E_TLV_TX_DATA0
[ EXTRA] [ 12.763633] 2020-04-15 05:54:24.402 INFO [TCP0-2-2] New queue size = 50
[ EXTRA] [ 12.763669] 2020-04-15 05:54:24.404 INFO [TCP0-2-2] tcp write: A8 E0 AE A2 AD A0 B3 04 0C 00 32 34 35 39 30 34 31 37 30 32 37 38 B9 04 01 00 02 A4 04 04 00 31 32 34 35 A5 04 01 00 02 81 06 31 55 ED DF 0F 66 00 00 (50 bytes)
[ EXTRA] [ 12.764341] 2020-04-15 05:54:24.404 INFO [TCP0-2-2] New queue size = 0
[ EXTRA] [ 12.818313] 2020-04-15 05:54:24.457 INFO [TCP0-2-2] Change connection state to ClosingState
[ EXTRA] [ 12.818400] 2020-04-15 05:54:24.458 INFO [TCP0-2-2] Change connection state to UnconnectedState
[ EXTRA] [ 12.818436] 2020-04-15 05:54:24.458 INFO [TCP0-2-2] connection lost
[ EXTRA] [ 12.822612] 2020-04-15 05:54:24.463 INFO [Ofd-2-2] Command --> U2E_TLV_RX_CONNECT_STATE0
[ EXTRA] [ 12.825548] 2020-04-15 05:54:24.466 INFO [USB-2-2] write: 10 01 00 (3 bytes)
[ EXTRA] [ 13.763265] 2020-04-15 05:54:25.403 INFO [USB-2-2] read: 90 3E 2A 08 41 0A 81 A2 01 05 39 32 38 33 34 34 30 33 30 30 32 31 31 38 33 33 CE 00 14 00 00 00 CE 00 A5 22 A5 02 01 10 09 92 83 44 03 00 21 18 33 00 13 E3 F4 27 CF 0B 9A 00 13 AE 00 06 00 A4 (64 bytes)
[ EXTRA] [ 13.769813] 2020-04-15 05:54:25.409 INFO [Ofd-2-2] Command <-- U2E_TLV_TX_DATA0
[ EXTRA] [ 13.769890] 2020-04-15 05:54:25.410 INFO [TCP0-2-2] New queue size = 62
[ EXTRA] [ 14.767585] 2020-04-15 05:54:26.408 INFO [USB-2-2] read: 80 00 (2 bytes)
[ EXTRA] [ 14.773121] 2020-04-15 05:54:26.413 INFO [Ofd-2-2] Command <-- U2E_TLV_TX_CONNECT0_CLOSE
[ EXTRA] [ 16.288618] 2020-04-15 05:54:27.929 INFO [USB-2-2] read: 60 02 50 00 70 0F 73 65 72 76 69 63 65 2E 61 74 6F 6C 2E 72 75 (21 bytes)
[ EXTRA] [ 16.291834] 2020-04-15 05:54:27.932 INFO [Ofd-2-2] Command <-- U2E_TLV_TX_PORT0
[ EXTRA] [ 16.293104] 2020-04-15 05:54:27.934 INFO [Ofd-2-2] Command <-- U2E_TLV_TX_CONNECT0
[ EXTRA] [ 16.294393] 2020-04-15 05:54:27.935 INFO [Ofd-2-2] Connect to service.atol.ru:80
[ EXTRA] [ 16.305823] 2020-04-15 05:54:27.946 INFO [TCP0-2-2] tcp write: 2A 08 41 0A 81 A2 01 05 39 32 38 33 34 34 30 33 30 30 32 31 31 38 33 33 CE 00 14 00 00 00 CE 00 A5 22 A5 02 01 10 09 92 83 44 03 00 21 18 33 00 13 E3 F4 27 CF 0B 9A 00 13 AE 00 06 00 A4 (62 bytes)
[ EXTRA] [ 16.308394] 2020-04-15 05:54:27.949 INFO [TCP0-2-2] New queue size = 0
[ EXTRA] [ 16.312366] 2020-04-15 05:54:27.953 INFO [TCP0-2-2] Found address: 5.188.186.133
[ EXTRA] [ 16.363944] 2020-04-15 05:54:28.003 INFO [TCP0-2-2] Connect to 5.188.186.133 established
[ EXTRA] [ 16.364020] 2020-04-15 05:54:28.004 INFO [Ofd-2-2] Command --> U2E_TLV_RX_CONNECT_STATE0
[ EXTRA] [ 16.366842] 2020-04-15 05:54:28.008 INFO [USB-2-2] write: 10 01 01 (3 bytes)
[ EXTRA] [ 17.293721] 2020-04-15 05:54:28.933 INFO [USB-2-2] read: 24 0D 0A 27 6C 6B 62 21 38 2B 3E 3F 32 31 2D 3E 38 26 36 35 24 29 0D 0A 28 68 6F 6E 2D 34 27 3A 3B 3D 37 27 38 3F 2F 32 3B 2E 23 90 3E 0D 0A 26 74 6B 63 26 3D 2E 2F 20 21 22 23 24 25 26 33 28 (64 bytes)
[ EXTRA] [ 17.297282] 2020-04-15 05:54:28.937 INFO [Ofd-2-2] Command <-- UNKNOWN (24)
[ EXTRA] [ 18.299599] 2020-04-15 05:54:29.938 INFO [USB-2-2] read: 70 64 66 73 6B 7E 7C 77 2A 31 22 23 24 25 26 27 3C 3D 37 3E 90 05 0D 0A 72 0D 0A (27 bytes)
[ EXTRA] [ 18.299682] 2020-04-15 05:54:29.940 INFO [Ofd-2-2] Command <-- UNKNOWN (3e)
[ EXTRA] [ 19.305240] 2020-04-15 05:54:30.945 INFO [USB-2-2] read: 0D 0A 2B 67 63 69 6C 2F 3A 2B 2C 2D 2E 2F 20 21 22 23 35 2A 0D 0A 29 6C 63 76 60 23 3E 2F 20 21 22 23 24 25 26 30 31 2E 0D 0A 2D 90 10 6C 6C 79 7C 2F 3A 2B 2C 2D 2E 2F 20 32 31 36 37 90 2B 24 (64 bytes)
[ EXTRA] [ 19.306714] 2020-04-15 05:54:30.947 INFO [Ofd-2-2] Command <-- UNKNOWN (31)
[ EXTRA] [ 19.307989] 2020-04-15 05:54:30.949 INFO [Ofd-2-2] Command <-- UNKNOWN (35)
[ rdpclient 955] [ 20.818621] TS_STATUS_FINDING_DESTINATION
[ gm] [ 20.818988] Do not display state after connection.
[ rdpclient 955] [ 20.829495] TS_STATUS_LOADING_DESTINATION
[ rdpclient 955] [ 20.830832] TS_STATUS_REDIRECTING_TO_DESTINATION
[ rdpclient 955] [ 21.259834] TS_STATUS_BRINGING_SESSION_ONLINE
[ rdpclient 955] [ 21.330844] errorInfo 0x00000000.
[ rdpclient 955] [ 21.766971] SessionId 0x00000014: KOMESTRA\user
Home
WTware diskless client.