18-35-26-655| [wtc.exe] Соединение закрыто. 18-35-26-720| [WTRC] [18.06.2021 18:35:26] Connection to server failed with error 10053 18-35-27-546| [TFTP] RRQ 33 bytes: 18-35-27-546| [TFTP] 00000000: 36 2e 30 2e 35 32 2f 77 74 77 61 72 65 2e 68 74 18-35-27-546| [TFTP] 00000010: 74 70 00 6f 63 74 65 74 00 74 73 69 7a 65 00 30 18-35-27-546| [TFTP] 00000020: 00 18-35-27-546| [TFTP] "6.0.52\wtware.http": tsize is requested, blksize default. 18-35-27-546| [TFTP] "6.0.52\wtware.http": "C:\Program Files (x86)\WTware\TFTPDROOT\6.0.52\wtware.http". 18-35-27-608| [TFTP] Received opcode ERR. 18-35-27-608| [TFTP] RRQ 38 bytes: 18-35-27-608| [TFTP] 00000000: 36 2e 30 2e 35 32 2f 77 74 77 61 72 65 2e 68 74 18-35-27-608| [TFTP] 00000010: 74 70 00 6f 63 74 65 74 00 62 6c 6b 73 69 7a 65 18-35-27-608| [TFTP] 00000020: 00 31 34 35 36 00 18-35-27-608| [TFTP] Request block size 1456, interface MTU 1500. 18-35-27-608| [TFTP] "6.0.52\wtware.http": tsize is not requested, blksize 1456 bytes. 18-35-27-608| [TFTP] "6.0.52\wtware.http": "C:\Program Files (x86)\WTware\TFTPDROOT\6.0.52\wtware.http". 18-35-27-608| [TFTP] "6.0.52\wtware.http": completed. 18-35-30-920| [TFTP] RRQ 50 bytes: 18-35-30-920| [TFTP] 00000000: 36 2e 30 2e 35 32 2f 77 74 77 61 72 65 2e 68 74 18-35-30-920| [TFTP] 00000010: 74 70 2e 63 66 67 00 6f 63 74 65 74 00 62 6c 6b 18-35-30-920| [TFTP] 00000020: 73 69 7a 65 00 31 34 33 32 00 74 73 69 7a 65 00 18-35-30-920| [TFTP] 00000030: 30 00 18-35-30-920| [TFTP] Request block size 1432, interface MTU 1500. 18-35-30-920| [TFTP] "6.0.52\wtware.http.cfg": tsize is requested, blksize 1432 bytes. 18-35-30-920| [TFTP] "6.0.52\wtware.http.cfg": "C:\Program Files (x86)\WTware\TFTPDROOT\6.0.52\wtware.http.cfg". 18-35-30-978| [TFTP] "6.0.52\wtware.http.cfg": completed. 18-35-30-978| [HTTP] '/wtware/6.0.52\packages\kernel' => 'C:\Program Files (x86)\WTware\TFTPDROOT\6.0.52\packages\kernel'. 18-35-41-225| [wtc.exe] Не удалось подключиться к 192.168.1.202:779. 18-35-48-752| [wtc.exe] Не удалось подключиться к 192.168.1.202:779. 18-35-50-658| [wtc.exe] Не удалось подключиться к 192.168.1.202:779. 18-35-51-712| [HTTP] WTware v.6.0.52 found at host [], mac 00:80:64:AC:01:C5. 18-35-51-724| [HTTP] '/wtware/6.0.52\packages\lib6' => 'C:\Program Files (x86)\WTware\TFTPDROOT\6.0.52\packages\lib6'. 18-35-52-478| WTware 6.0.52 supervisor. 18-35-52-478| [ KERNEL] [ 0.000000] Linux version 4.19.190 (aka@c23) (gcc version 8.3.0 (Debian 8.3.0-6)) #17 SMP Fri May 21 13:21:07 EDT 2021 18-35-52-478| [ KERNEL] [ 0.000000] x86/fpu: x87 FPU will use FXSAVE 18-35-52-478| [ KERNEL] [ 0.000000] BIOS-provided physical RAM map: 18-35-52-478| [ KERNEL] [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000091fff] usable 18-35-52-478| [ KERNEL] [ 0.000000] BIOS-e820: [mem 0x0000000000092000-0x000000000009ffff] reserved 18-35-52-478| [ KERNEL] [ 0.000000] BIOS-e820: [mem 0x00000000000ce000-0x00000000000cffff] reserved 18-35-52-478| [ KERNEL] [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved 18-35-52-478| [ KERNEL] [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000017ecffff] usable 18-35-52-478| [ KERNEL] [ 0.000000] BIOS-e820: [mem 0x0000000017ed0000-0x0000000017ed6fff] ACPI data 18-35-52-478| [ KERNEL] [ 0.000000] BIOS-e820: [mem 0x0000000017ed7000-0x0000000017ed7fff] ACPI NVS 18-35-52-478| [ KERNEL] [ 0.000000] BIOS-e820: [mem 0x0000000017ed8000-0x000000001fffffff] reserved 18-35-52-478| [ KERNEL] [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved 18-35-52-478| [ KERNEL] [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved 18-35-52-478| [ KERNEL] [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved 18-35-52-478| [ KERNEL] [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved 18-35-52-478| [ KERNEL] [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! 18-35-52-478| [ KERNEL] [ 0.000000] SMBIOS 2.6 present. 18-35-52-478| [ KERNEL] [ 0.000000] DMI: WYSE C CLASS/C CLASS, BIOS 1.0B 10/07/2009 18-35-52-478| [ KERNEL] [ 0.000000] tsc: Fast TSC calibration using PIT 18-35-52-478| [ KERNEL] [ 0.000000] tsc: Detected 1000.022 MHz processor 18-35-52-478| [ KERNEL] [ 0.009508] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved 18-35-52-478| [ KERNEL] [ 0.009516] e820: remove [mem 0x000a0000-0x000fffff] usable 18-35-52-478| [ KERNEL] [ 0.009543] last_pfn = 0x17ed0 max_arch_pfn = 0x100000 18-35-52-478| [ KERNEL] [ 0.009556] MTRR default type: uncachable 18-35-52-478| [ KERNEL] [ 0.009558] MTRR fixed ranges enabled: 18-35-52-478| [ KERNEL] [ 0.009563] 00000-9FFFF write-back 18-35-52-478| [ KERNEL] [ 0.009567] A0000-BFFFF uncachable 18-35-52-478| [ KERNEL] [ 0.009571] C0000-C7FFF write-protect 18-35-52-478| [ KERNEL] [ 0.009576] C8000-DFFFF uncachable 18-35-52-478| [ KERNEL] [ 0.009580] E0000-FFFFF write-protect 18-35-52-478| [ KERNEL] [ 0.009582] MTRR variable ranges enabled: 18-35-52-478| [ KERNEL] [ 0.009588] 0 base 000000000 mask FE0000000 write-back 18-35-52-478| [ KERNEL] [ 0.009594] 1 base 017F00000 mask FFFF00000 uncachable 18-35-52-478| [ KERNEL] [ 0.009599] 2 base 018000000 mask FF8000000 uncachable 18-35-52-478| [ KERNEL] [ 0.009601] 3 disabled 18-35-52-478| [ KERNEL] [ 0.009604] 4 disabled 18-35-52-478| [ KERNEL] [ 0.009606] 5 disabled 18-35-52-478| [ KERNEL] [ 0.009608] 6 disabled 18-35-52-478| [ KERNEL] [ 0.009610] 7 disabled 18-35-52-478| [ KERNEL] [ 0.010129] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT 18-35-52-478| [ KERNEL] [ 0.010302] total RAM covered: 383M 18-35-52-478| [ KERNEL] [ 0.013591] Found optimal setting for mtrr clean up 18-35-52-478| [ KERNEL] [ 0.013597] gran_size: 64K chunk_size: 2M num_reg: 3 lose cover RAM: 0G 18-35-52-478| [ KERNEL] [ 0.027920] found SMP MP-table at [mem 0x000f67d0-0x000f67df] 18-35-52-478| [ KERNEL] [ 0.027989] initial memory mapped: [mem 0x00000000-0x01bfffff] 18-35-52-478| [ KERNEL] [ 0.028197] ACPI: Early table checksum verification disabled 18-35-52-478| [ KERNEL] [ 0.028662] ACPI: RSDP 0x00000000000F67A0 000024 (v02 PTLTD ) 18-35-52-478| [ KERNEL] [ 0.028678] ACPI: XSDT 0x0000000017ED2B5D 00004C (v01 PTLTD ? XSDT 06040000 LTP 00000000) 18-35-52-478| [ KERNEL] [ 0.028703] ACPI: FACP 0x0000000017ED6984 0000F4 (v03 VX855 PTLTW 06040000 PTL_ 000F4240) 18-35-52-478| [ KERNEL] [ 0.028732] ACPI: DSDT 0x0000000017ED2BA9 003D67 (v01 VIA PTL_ACPI 06040000 MSFT 0100000E) 18-35-52-478| [ KERNEL] [ 0.028753] ACPI: FACS 0x0000000017ED7FC0 000040 18-35-52-478| [ KERNEL] [ 0.028768] ACPI: FACS 0x0000000017ED7FC0 000040 18-35-52-478| [ KERNEL] [ 0.028783] ACPI: SSDT 0x0000000017ED6A78 0004BA (v01 PPmmRe PPm 06040000 INTL 20030224) 18-35-52-478| [ KERNEL] [ 0.028804] ACPI: APIC 0x0000000017ED6F32 00005A (v01 PTLTD ? APIC 06040000 LTP 00000000) 18-35-52-478| [ KERNEL] [ 0.028825] ACPI: MCFG 0x0000000017ED6F8C 00003C (v01 PTLTD MCFG 06040000 LTP 00000000) 18-35-52-478| [ KERNEL] [ 0.028845] ACPI: HPET 0x0000000017ED6FC8 000038 (v01 PTLTD HPETTBL 06040000 LTP 00000001) 18-35-52-478| [ KERNEL] [ 0.028864] ACPI: Reserving FACP table memory at [mem 0x17ed6984-0x17ed6a77] 18-35-52-478| [ KERNEL] [ 0.028869] ACPI: Reserving DSDT table memory at [mem 0x17ed2ba9-0x17ed690f] 18-35-52-478| [ KERNEL] [ 0.028874] ACPI: Reserving FACS table memory at [mem 0x17ed7fc0-0x17ed7fff] 18-35-52-478| [ KERNEL] [ 0.028879] ACPI: Reserving FACS table memory at [mem 0x17ed7fc0-0x17ed7fff] 18-35-52-478| [ KERNEL] [ 0.028884] ACPI: Reserving SSDT table memory at [mem 0x17ed6a78-0x17ed6f31] 18-35-52-478| [ KERNEL] [ 0.028889] ACPI: Reserving APIC table memory at [mem 0x17ed6f32-0x17ed6f8b] 18-35-52-478| [ KERNEL] [ 0.028894] ACPI: Reserving MCFG table memory at [mem 0x17ed6f8c-0x17ed6fc7] 18-35-52-478| [ KERNEL] [ 0.028899] ACPI: Reserving HPET table memory at [mem 0x17ed6fc8-0x17ed6fff] 18-35-52-478| [ KERNEL] [ 0.028932] ACPI: Local APIC address 0xfee00000 18-35-52-478| [ KERNEL] [ 0.028945] 0MB HIGHMEM available. 18-35-52-478| [ KERNEL] [ 0.028950] 382MB LOWMEM available. 18-35-52-478| [ KERNEL] [ 0.028953] mapped low ram: 0 - 17ed0000 18-35-52-478| [ KERNEL] [ 0.028955] low ram: 0 - 17ed0000 18-35-52-478| [ KERNEL] [ 0.028966] Zone ranges: 18-35-52-478| [ KERNEL] [ 0.028969] DMA [mem 0x0000000000001000-0x0000000000ffffff] 18-35-52-478| [ KERNEL] [ 0.028974] Normal [mem 0x0000000001000000-0x0000000017ecffff] 18-35-52-478| [ KERNEL] [ 0.028980] HighMem empty 18-35-52-478| [ KERNEL] [ 0.028983] Movable zone start for each node 18-35-52-478| [ KERNEL] [ 0.028985] Early memory node ranges 18-35-52-478| [ KERNEL] [ 0.028989] node 0: [mem 0x0000000000001000-0x0000000000091fff] 18-35-52-478| [ KERNEL] [ 0.028994] node 0: [mem 0x0000000000100000-0x0000000017ecffff] 18-35-52-478| [ KERNEL] [ 0.029000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000017ecffff] 18-35-52-478| [ KERNEL] [ 0.029006] On node 0 totalpages: 97889 18-35-52-478| [ KERNEL] [ 0.035025] DMA zone: 32 pages used for memmap 18-35-52-478| [ KERNEL] [ 0.035029] DMA zone: 0 pages reserved 18-35-52-478| [ KERNEL] [ 0.035033] DMA zone: 3985 pages, LIFO batch:0 18-35-52-478| [ KERNEL] [ 0.035289] Normal zone: 734 pages used for memmap 18-35-52-478| [ KERNEL] [ 0.035293] Normal zone: 93904 pages, LIFO batch:31 18-35-52-478| [ KERNEL] [ 0.040987] Using APIC driver default 18-35-52-478| [ KERNEL] [ 0.041150] ACPI: PM-Timer IO Port: 0x4008 18-35-52-478| [ KERNEL] [ 0.041158] ACPI: Local APIC address 0xfee00000 18-35-52-478| [ KERNEL] [ 0.041185] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) 18-35-52-478| [ KERNEL] [ 0.041207] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 18-35-52-478| [ KERNEL] [ 0.041219] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) 18-35-52-478| [ KERNEL] [ 0.041225] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) 18-35-52-478| [ KERNEL] [ 0.041232] ACPI: IRQ0 used by override. 18-35-52-478| [ KERNEL] [ 0.041237] ACPI: IRQ9 used by override. 18-35-52-478| [ KERNEL] [ 0.041248] Using ACPI (MADT) for SMP configuration information 18-35-52-478| [ KERNEL] [ 0.041255] ACPI: HPET id: 0x11068201 base: 0xfed00000 18-35-52-478| [ KERNEL] [ 0.041270] smpboot: Allowing 1 CPUs, 0 hotplug CPUs 18-35-52-478| [ KERNEL] [ 0.041329] [mem 0x20000000-0xdfffffff] available for PCI devices 18-35-52-478| [ KERNEL] [ 0.041333] Booting paravirtualized kernel on bare hardware 18-35-52-478| [ KERNEL] [ 0.041345] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns 18-35-52-478| [ KERNEL] [ 0.041379] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:1 nr_node_ids:1 18-35-52-478| [ KERNEL] [ 0.041893] percpu: Embedded 27 pages/cpu s79180 r0 d31412 u110592 18-35-52-478| [ KERNEL] [ 0.041915] pcpu-alloc: s79180 r0 d31412 u110592 alloc=27*4096 18-35-52-478| [ KERNEL] [ 0.041919] pcpu-alloc: [0] 0 18-35-52-478| [ KERNEL] [ 0.041971] Built 1 zonelists, mobility grouping on. Total pages: 97123 18-35-52-478| [ KERNEL] [ 0.041977] Kernel command line: BOOT_IMAGE=http://192.168.1.100:789/wtware/6.0.52/packages/kernel quiet 18-35-52-478| [ KERNEL] [ 0.042604] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) 18-35-52-478| [ KERNEL] [ 0.042867] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) 18-35-52-478| [ KERNEL] [ 0.042891] Initializing CPU#0 18-35-52-478| [ KERNEL] [ 0.042906] Initializing HighMem for node 0 (00000000:00000000) 18-35-52-478| [ KERNEL] [ 0.050529] Memory: 377932K/391556K available (4432K kernel code, 221K rwdata, 1360K rodata, 3520K init, 304K bss, 13624K reserved, 0K cma-reserved, 0K highmem) 18-35-52-478| [ KERNEL] [ 0.050554] virtual kernel memory layout: 18-35-52-478| [ KERNEL] [ 0.050554] fixmap : 0xfff65000 - 0xfffff000 ( 616 kB) 18-35-52-478| [ KERNEL] [ 0.050554] cpu_entry : 0xffc00000 - 0xffc9d000 ( 628 kB) 18-35-52-478| [ KERNEL] [ 0.050554] pkmap : 0xff400000 - 0xff800000 (4096 kB) 18-35-52-478| [ KERNEL] [ 0.050554] vmalloc : 0xd86d0000 - 0xff3fe000 ( 621 MB) 18-35-52-478| [ KERNEL] [ 0.050554] lowmem : 0xc0000000 - 0xd7ed0000 ( 382 MB) 18-35-52-478| [ KERNEL] [ 0.050554] .init : 0xc15ef000 - 0xc195f000 (3520 kB) 18-35-52-478| [ KERNEL] [ 0.050554] .data : 0xc14541ad - 0xc15e37c0 (1597 kB) 18-35-52-478| [ KERNEL] [ 0.050554] .text : 0xc1000000 - 0xc14541ad (4432 kB) 18-35-52-478| [ KERNEL] [ 0.050557] Checking if this processor honours the WP bit even in supervisor mode...Ok. 18-35-52-478| [ KERNEL] [ 0.050779] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 18-35-52-478| [ KERNEL] [ 0.050908] rcu: Hierarchical RCU implementation. 18-35-52-478| [ KERNEL] [ 0.050912] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. 18-35-52-478| [ KERNEL] [ 0.050917] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 18-35-52-478| [ KERNEL] [ 0.050944] NR_IRQS: 2304, nr_irqs: 256, preallocated irqs: 16 18-35-52-478| [ KERNEL] [ 0.051458] CPU 0 irqstacks, hard=(ptrval) soft=(ptrval) 18-35-52-478| [ KERNEL] [ 0.053196] Console: colour VGA+ 80x25 18-35-52-478| [ KERNEL] [ 0.053218] console [tty0] enabled 18-35-52-478| [ KERNEL] [ 0.053233] ACPI: Core revision 20180810 18-35-52-478| [ KERNEL] [ 0.053689] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns 18-35-52-478| [ KERNEL] [ 0.053710] hpet clockevent registered 18-35-52-478| [ KERNEL] [ 0.053721] APIC: Switch to symmetric I/O mode setup 18-35-52-478| [ KERNEL] [ 0.053725] Enabling APIC mode: Flat. Using 1 I/O APICs 18-35-52-478| [ KERNEL] [ 0.054478] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 18-35-52-478| [ KERNEL] [ 0.073724] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0xe6a2bd9634, max_idle_ns: 440795211168 ns 18-35-52-478| [ KERNEL] [ 0.073769] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.04 BogoMIPS (lpj=4000088) 18-35-52-478| [ KERNEL] [ 0.073778] pid_max: default: 32768 minimum: 301 18-35-52-478| [ KERNEL] [ 0.073889] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) 18-35-52-478| [ KERNEL] [ 0.073899] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) 18-35-52-478| [ KERNEL] [ 0.074362] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 18-35-52-478| [ KERNEL] [ 0.074367] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 18-35-52-478| [ KERNEL] [ 0.074373] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization 18-35-52-478| [ KERNEL] [ 0.074378] Spectre V2 : Spectre mitigation: kernel not compiled with retpoline; no mitigation available! 18-35-52-478| [ KERNEL] [ 0.074381] Speculative Store Bypass: Vulnerable 18-35-52-478| [ KERNEL] [ 0.074384] L1TF: Kernel not compiled for PAE. No mitigation for L1TF 18-35-52-478| [ KERNEL] [ 0.074482] MDS: Vulnerable: Clear CPU buffers attempted, no microcode 18-35-52-478| [ KERNEL] [ 0.091426] Freeing SMP alternatives memory: 20K 18-35-52-478| [ KERNEL] [ 0.205736] smpboot: CPU0: Centaur VIA Eden Processor 1000MHz (family: 0x6, model: 0xd, stepping: 0x0) 18-35-52-478| [ KERNEL] [ 0.206105] Performance Events: no PMU driver, software events only. 18-35-52-478| [ KERNEL] [ 0.206270] rcu: Hierarchical SRCU implementation. 18-35-52-478| [ KERNEL] [ 0.206745] smp: Bringing up secondary CPUs ... 18-35-52-478| [ KERNEL] [ 0.206750] smp: Brought up 1 node, 1 CPU 18-35-52-478| [ KERNEL] [ 0.206753] smpboot: Max logical packages: 1 18-35-52-478| [ KERNEL] [ 0.206759] smpboot: Total of 1 processors activated (2000.04 BogoMIPS) 18-35-52-478| [ KERNEL] [ 0.207644] devtmpfs: initialized 18-35-52-478| [ KERNEL] [ 0.208183] random: get_random_u32 called from bucket_table_alloc.isra.8+0x7d/0x160 with crng_init=0 18-35-52-478| [ KERNEL] [ 0.208351] PM: Registering ACPI NVS region [mem 0x17ed7000-0x17ed7fff] (4096 bytes) 18-35-52-478| [ KERNEL] [ 0.208486] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns 18-35-52-478| [ KERNEL] [ 0.208497] futex hash table entries: 256 (order: 2, 16384 bytes) 18-35-52-478| [ KERNEL] [ 0.208551] pinctrl core: initialized pinctrl subsystem 18-35-52-478| [ KERNEL] [ 0.208915] NET: Registered protocol family 16 18-35-52-478| [ KERNEL] [ 0.209632] cpuidle: using governor ladder 18-35-52-478| [ KERNEL] [ 0.209637] cpuidle: using governor menu 18-35-52-478| [ KERNEL] [ 0.209706] ACPI: bus type PCI registered 18-35-52-478| [ KERNEL] [ 0.209898] PCI: MMCONFIG for domain 0000 [bus 00-00] at [mem 0xe0000000-0xe00fffff] (base 0xe0000000) 18-35-52-478| [ KERNEL] [ 0.209907] PCI: MMCONFIG at [mem 0xe0000000-0xe00fffff] reserved in E820 18-35-52-478| [ KERNEL] [ 0.209909] PCI: Using MMCONFIG for extended config space 18-35-52-478| [ KERNEL] [ 0.209913] PCI: Using configuration type 1 for base access 18-35-52-478| [ KERNEL] [ 0.229197] ACPI: Added _OSI(Module Device) 18-35-52-478| [ KERNEL] [ 0.229201] ACPI: Added _OSI(Processor Device) 18-35-52-478| [ KERNEL] [ 0.229205] ACPI: Added _OSI(3.0 _SCP Extensions) 18-35-52-478| [ KERNEL] [ 0.229209] ACPI: Added _OSI(Processor Aggregator Device) 18-35-52-478| [ KERNEL] [ 0.229214] ACPI: Added _OSI(Linux-Dell-Video) 18-35-52-478| [ KERNEL] [ 0.229218] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) 18-35-52-478| [ KERNEL] [ 0.237415] ACPI: Actual Package length (8) is larger than NumElements field (2), truncated 18-35-52-478| [ KERNEL] [ 0.237565] ACPI: Actual Package length (8) is larger than NumElements field (2), truncated 18-35-52-478| [ KERNEL] [ 0.237708] ACPI: Actual Package length (8) is larger than NumElements field (2), truncated 18-35-52-478| [ KERNEL] [ 0.237903] ACPI: 2 ACPI AML tables successfully acquired and loaded 18-35-52-478| [ KERNEL] [ 0.241505] ACPI: Interpreter enabled 18-35-52-478| [ KERNEL] [ 0.241563] ACPI: (supports S0 S1 S3 S5) 18-35-52-478| [ KERNEL] [ 0.241567] ACPI: Using IOAPIC for interrupt routing 18-35-52-478| [ KERNEL] [ 0.242369] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug 18-35-52-478| [ KERNEL] [ 0.242998] ACPI: Enabled 9 GPEs in block 00 to 0F 18-35-52-478| [ KERNEL] [ 0.243010] ACPI: Enabled 1 GPEs in block 10 to 1F 18-35-52-478| [ KERNEL] [ 0.264590] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) 18-35-52-478| [ KERNEL] [ 0.264609] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] 18-35-52-478| [ KERNEL] [ 0.264628] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM 18-35-52-478| [ KERNEL] [ 0.264641] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-00] only partially covers this bridge 18-35-52-478| [ KERNEL] [ 0.264805] acpi PNP0A03:00: host bridge window expanded to [mem 0x20000000-0xfff7ffff window]; [mem 0x20000000-0xfff7ffff window] ignored 18-35-52-478| [ KERNEL] [ 0.264823] acpi PNP0A03:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cc1ff]) 18-35-52-478| [ KERNEL] [ 0.265011] PCI host bridge to bus 0000:00 18-35-52-478| [ KERNEL] [ 0.265020] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] 18-35-52-478| [ KERNEL] [ 0.265027] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] 18-35-52-478| [ KERNEL] [ 0.265035] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] 18-35-52-478| [ KERNEL] [ 0.265042] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] 18-35-52-478| [ KERNEL] [ 0.265049] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] 18-35-52-478| [ KERNEL] [ 0.265057] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] 18-35-52-478| [ KERNEL] [ 0.265064] pci_bus 0000:00: root bus resource [mem 0x20000000-0xfff7ffff window] 18-35-52-478| [ KERNEL] [ 0.265072] pci_bus 0000:00: root bus resource [bus 00-ff] 18-35-52-478| [ KERNEL] [ 0.265102] pci 0000:00:00.0: [1106:0409] type 00 class 0x060000 18-35-52-478| [ KERNEL] [ 0.266153] pci 0000:00:00.1: [1106:1409] type 00 class 0x060000 18-35-52-478| [ KERNEL] [ 0.266656] pci 0000:00:00.2: [1106:2409] type 00 class 0x060000 18-35-52-478| [ KERNEL] [ 0.267040] pci 0000:00:00.3: [1106:3409] type 00 class 0x060000 18-35-52-478| [ KERNEL] [ 0.267460] pci 0000:00:00.4: [1106:4409] type 00 class 0x060000 18-35-52-478| [ KERNEL] [ 0.267858] pci 0000:00:00.5: [1106:5409] type 00 class 0x080020 18-35-52-478| [ KERNEL] [ 0.268274] pci 0000:00:00.6: [1106:6409] type 00 class 0x060000 18-35-52-478| [ KERNEL] [ 0.268668] pci 0000:00:00.7: [1106:7409] type 00 class 0x060000 18-35-52-478| [ KERNEL] [ 0.269068] pci 0000:00:01.0: [1106:5122] type 00 class 0x030000 18-35-52-478| [ KERNEL] [ 0.269101] pci 0000:00:01.0: reg 0x10: [mem 0xf0000000-0xf7ffffff pref] 18-35-52-478| [ KERNEL] [ 0.269117] pci 0000:00:01.0: reg 0x14: [mem 0xf8000000-0xf8ffffff] 18-35-52-478| [ KERNEL] [ 0.269163] pci 0000:00:01.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] 18-35-52-478| [ KERNEL] [ 0.269213] pci 0000:00:01.0: supports D1 D2 18-35-52-478| [ KERNEL] [ 0.269568] pci 0000:00:0f.0: [1106:c409] type 00 class 0x01018a 18-35-52-478| [ KERNEL] [ 0.269639] pci 0000:00:0f.0: reg 0x20: [io 0x4460-0x446f] 18-35-52-478| [ KERNEL] [ 0.269670] pci 0000:00:0f.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] 18-35-52-478| [ KERNEL] [ 0.269676] pci 0000:00:0f.0: legacy IDE quirk: reg 0x14: [io 0x03f6] 18-35-52-478| [ KERNEL] [ 0.269683] pci 0000:00:0f.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] 18-35-52-478| [ KERNEL] [ 0.269689] pci 0000:00:0f.0: legacy IDE quirk: reg 0x1c: [io 0x0376] 18-35-52-478| [ KERNEL] [ 0.270418] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300 18-35-52-478| [ KERNEL] [ 0.270493] pci 0000:00:10.0: reg 0x20: [io 0x4400-0x441f] 18-35-52-478| [ KERNEL] [ 0.270569] pci 0000:00:10.0: supports D1 D2 18-35-52-478| [ KERNEL] [ 0.270576] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold 18-35-52-478| [ KERNEL] [ 0.271173] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300 18-35-52-478| [ KERNEL] [ 0.271245] pci 0000:00:10.1: reg 0x20: [io 0x4420-0x443f] 18-35-52-478| [ KERNEL] [ 0.271318] pci 0000:00:10.1: supports D1 D2 18-35-52-478| [ KERNEL] [ 0.271325] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold 18-35-52-478| [ KERNEL] [ 0.271719] pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300 18-35-52-478| [ KERNEL] [ 0.271786] pci 0000:00:10.2: reg 0x20: [io 0x4440-0x445f] 18-35-52-478| [ KERNEL] [ 0.271853] pci 0000:00:10.2: supports D1 D2 18-35-52-478| [ KERNEL] [ 0.271859] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold 18-35-52-478| [ KERNEL] [ 0.272210] pci 0000:00:10.4: [1106:3104] type 00 class 0x0c0320 18-35-52-478| [ KERNEL] [ 0.272245] pci 0000:00:10.4: reg 0x10: [mem 0xf9304000-0xf93040ff] 18-35-52-478| [ KERNEL] [ 0.272356] pci 0000:00:10.4: supports D1 D2 18-35-52-478| [ KERNEL] [ 0.272363] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold 18-35-52-478| [ KERNEL] [ 0.272723] pci 0000:00:11.0: [1106:8409] type 00 class 0x060100 18-35-52-478| [ KERNEL] [ 0.273194] pci 0000:00:11.7: [1106:a353] type 00 class 0x060000 18-35-52-478| [ KERNEL] [ 0.273583] pci 0000:00:13.0: [1106:b353] type 01 class 0x060400 18-35-52-478| [ KERNEL] [ 0.274317] pci 0000:00:14.0: [1106:3288] type 00 class 0x040300 18-35-52-478| [ KERNEL] [ 0.274364] pci 0000:00:14.0: reg 0x10: [mem 0xf9300000-0xf9303fff 64bit] 18-35-52-478| [ KERNEL] [ 0.274490] pci 0000:00:14.0: PME# supported from D0 D3hot D3cold 18-35-52-478| [ KERNEL] [ 0.275057] pci_bus 0000:01: extended config space not accessible 18-35-52-478| [ KERNEL] [ 0.275196] pci 0000:01:03.0: [1106:3119] type 00 class 0x020000 18-35-52-478| [ KERNEL] [ 0.275227] pci 0000:01:03.0: reg 0x10: [io 0x5000-0x50ff] 18-35-52-478| [ KERNEL] [ 0.275245] pci 0000:01:03.0: reg 0x14: [mem 0xf9000000-0xf90000ff] 18-35-52-478| [ KERNEL] [ 0.275353] pci 0000:01:03.0: supports D1 D2 18-35-52-478| [ KERNEL] [ 0.275359] pci 0000:01:03.0: PME# supported from D0 D1 D2 D3hot D3cold 18-35-52-478| [ KERNEL] [ 0.275595] pci 0000:00:13.0: PCI bridge to [bus 01] 18-35-52-478| [ KERNEL] [ 0.275605] pci 0000:00:13.0: bridge window [io 0x5000-0x5fff] 18-35-52-478| [ KERNEL] [ 0.275615] pci 0000:00:13.0: bridge window [mem 0xf9000000-0xf90fffff] 18-35-52-478| [ KERNEL] [ 0.275637] pci_bus 0000:00: on NUMA node 0 18-35-52-478| [ KERNEL] [ 0.276010] ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *10, disabled. 18-35-52-478| [ KERNEL] [ 0.276208] ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *9, disabled. 18-35-52-478| [ KERNEL] [ 0.276400] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *11, disabled. 18-35-52-478| [ KERNEL] [ 0.276584] ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *0, disabled. 18-35-52-478| [ KERNEL] [ 0.276838] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 *10 11 12) 18-35-52-478| [ KERNEL] [ 0.277086] ACPI: PCI Interrupt Link [LNKB] (IRQs *9 10 11 12) 18-35-52-478| [ KERNEL] [ 0.277332] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11 12) 18-35-52-478| [ KERNEL] [ 0.277529] ACPI: PCI Interrupt Link [LNKD] (IRQs 9 10 11 12) *0, disabled. 18-35-52-478| [ KERNEL] [ 0.280690] pci 0000:00:01.0: vgaarb: setting as boot VGA device 18-35-52-478| [ KERNEL] [ 0.280700] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none 18-35-52-478| [ KERNEL] [ 0.280716] pci 0000:00:01.0: vgaarb: bridge control possible 18-35-52-478| [ KERNEL] [ 0.280719] vgaarb: loaded 18-35-52-478| [ KERNEL] [ 0.280974] ACPI: bus type USB registered 18-35-52-478| [ KERNEL] [ 0.281135] usbcore: registered new interface driver usbfs 18-35-52-478| [ KERNEL] [ 0.281224] usbcore: registered new interface driver hub 18-35-52-478| [ KERNEL] [ 0.281276] usbcore: registered new device driver usb 18-35-52-478| [ KERNEL] [ 0.281655] pps_core: LinuxPPS API ver. 1 registered 18-35-52-478| [ KERNEL] [ 0.281659] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 18-35-52-478| [ KERNEL] [ 0.281822] PTP clock support registered 18-35-52-478| [ KERNEL] [ 0.282122] PCI: Using ACPI for IRQ routing 18-35-52-478| [ KERNEL] [ 0.282130] PCI: pci_cache_line_size set to 64 bytes 18-35-52-478| [ KERNEL] [ 0.282221] Expanded resource Reserved due to conflict with PCI Bus 0000:00 18-35-52-478| [ KERNEL] [ 0.282227] e820: reserve RAM buffer [mem 0x00092000-0x0009ffff] 18-35-52-478| [ KERNEL] [ 0.282232] e820: reserve RAM buffer [mem 0x17ed0000-0x17ffffff] 18-35-52-478| [ KERNEL] [ 0.283436] HPET: 3 timers in total, 0 timers will be used for per-cpu timer 18-35-52-478| [ KERNEL] [ 0.283447] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 18-35-52-478| [ KERNEL] [ 0.283460] hpet0: 3 comparators, 32-bit 14.318180 MHz counter 18-35-52-478| [ KERNEL] [ 0.286607] clocksource: Switched to clocksource tsc-early 18-35-52-478| [ KERNEL] [ 0.286834] pnp: PnP ACPI init 18-35-52-478| [ KERNEL] [ 0.287378] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved 18-35-52-478| [ KERNEL] [ 0.287449] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) 18-35-52-478| [ KERNEL] [ 0.288189] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) 18-35-52-478| [ KERNEL] [ 0.288528] system 00:02: [mem 0x00000000-0x0009ffff] could not be reserved 18-35-52-478| [ KERNEL] [ 0.288537] system 00:02: [mem 0x000e0000-0x000fffff] could not be reserved 18-35-52-478| [ KERNEL] [ 0.288546] system 00:02: [mem 0xfff00000-0xffffffff] could not be reserved 18-35-52-478| [ KERNEL] [ 0.288555] system 00:02: [mem 0xffee0000-0xffefffff] has been reserved 18-35-52-478| [ KERNEL] [ 0.288565] system 00:02: [mem 0xfec00000-0xfec0ffff] could not be reserved 18-35-52-478| [ KERNEL] [ 0.288574] system 00:02: [mem 0xfee00000-0xfee0ffff] could not be reserved 18-35-52-478| [ KERNEL] [ 0.288582] system 00:02: [mem 0xfed10000-0xfed100ff] has been reserved 18-35-52-478| [ KERNEL] [ 0.288591] system 00:02: [mem 0xfed20000-0xfed200ff] has been reserved 18-35-52-478| [ KERNEL] [ 0.288600] system 00:02: [mem 0xfed30000-0xfed3ffff] has been reserved 18-35-52-478| [ KERNEL] [ 0.288609] system 00:02: [mem 0xffb80000-0xffb8ffff] has been reserved 18-35-52-478| [ KERNEL] [ 0.288617] system 00:02: [mem 0xffb90000-0xffb9ffff] has been reserved 18-35-52-478| [ KERNEL] [ 0.288626] system 00:02: [mem 0xffba0000-0xffbaffff] has been reserved 18-35-52-478| [ KERNEL] [ 0.288635] system 00:02: [mem 0xffbb0000-0xffbbffff] has been reserved 18-35-52-478| [ KERNEL] [ 0.288644] system 00:02: [mem 0xffbc0000-0xffbcffff] has been reserved 18-35-52-478| [ KERNEL] [ 0.288653] system 00:02: [mem 0xffbd0000-0xffbdffff] has been reserved 18-35-52-478| [ KERNEL] [ 0.288662] system 00:02: [mem 0xffbe0000-0xffbeffff] has been reserved 18-35-52-478| [ KERNEL] [ 0.288670] system 00:02: [mem 0xffbf0000-0xffbfffff] has been reserved 18-35-52-478| [ KERNEL] [ 0.288679] system 00:02: [mem 0xffc00000-0xffc0ffff] has been reserved 18-35-52-478| [ KERNEL] [ 0.288746] system 00:02: Plug and Play ACPI device, IDs PNP0c01 (active) 18-35-52-478| [ KERNEL] [ 0.289216] system 00:03: [io 0x04d0-0x04d1] has been reserved 18-35-52-478| [ KERNEL] [ 0.289225] system 00:03: [io 0xfe10-0xfe11] has been reserved 18-35-52-478| [ KERNEL] [ 0.289233] system 00:03: [io 0xfe00] has been reserved 18-35-52-478| [ KERNEL] [ 0.289241] system 00:03: [io 0x4000-0x407f] has been reserved 18-35-52-478| [ KERNEL] [ 0.289249] system 00:03: [io 0x4100-0x411f] has been reserved 18-35-52-478| [ KERNEL] [ 0.289317] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) 18-35-52-478| [ KERNEL] [ 0.289317] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active) 18-35-52-478| [ KERNEL] [ 0.289443] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active) 18-35-52-478| [ KERNEL] [ 0.289893] pnp: PnP ACPI: found 6 devices 18-35-52-478| [ KERNEL] [ 0.337442] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns 18-35-52-478| [ KERNEL] [ 0.338085] pci 0000:00:01.0: BAR 6: assigned [mem 0x20000000-0x2000ffff pref] 18-35-52-478| [ KERNEL] [ 0.338103] pci 0000:00:13.0: PCI bridge to [bus 01] 18-35-52-478| [ KERNEL] [ 0.338112] pci 0000:00:13.0: bridge window [io 0x5000-0x5fff] 18-35-52-478| [ KERNEL] [ 0.338124] pci 0000:00:13.0: bridge window [mem 0xf9000000-0xf90fffff] 18-35-52-478| [ KERNEL] [ 0.338141] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] 18-35-52-478| [ KERNEL] [ 0.338148] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] 18-35-52-478| [ KERNEL] [ 0.338156] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] 18-35-52-478| [ KERNEL] [ 0.338163] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] 18-35-52-478| [ KERNEL] [ 0.338171] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] 18-35-52-478| [ KERNEL] [ 0.338178] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] 18-35-52-478| [ KERNEL] [ 0.338186] pci_bus 0000:00: resource 10 [mem 0x20000000-0xfff7ffff window] 18-35-52-478| [ KERNEL] [ 0.338194] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff] 18-35-52-478| [ KERNEL] [ 0.338201] pci_bus 0000:01: resource 1 [mem 0xf9000000-0xf90fffff] 18-35-52-478| [ KERNEL] [ 0.338479] NET: Registered protocol family 2 18-35-52-478| [ KERNEL] [ 0.338930] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) 18-35-52-478| [ KERNEL] [ 0.338953] TCP established hash table entries: 4096 (order: 2, 16384 bytes) 18-35-52-478| [ KERNEL] [ 0.339008] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) 18-35-52-478| [ KERNEL] [ 0.339090] TCP: Hash tables configured (established 4096 bind 4096) 18-35-52-478| [ KERNEL] [ 0.339169] UDP hash table entries: 256 (order: 1, 8192 bytes) 18-35-52-478| [ KERNEL] [ 0.339189] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) 18-35-52-478| [ KERNEL] [ 0.339312] NET: Registered protocol family 1 18-35-52-478| [ KERNEL] [ 0.339427] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] 18-35-52-478| [ KERNEL] [ 0.341791] pci 0000:00:13.0: disabling DAC on VIA PCI bridge 18-35-52-478| [ KERNEL] [ 0.341821] PCI: CLS 32 bytes, default 64 18-35-52-478| [ KERNEL] [ 2.422178] Initialise system trusted keyrings 18-35-52-478| [ KERNEL] [ 2.431866] workingset: timestamp_bits=30 max_order=17 bucket_order=0 18-35-52-478| [ KERNEL] [ 2.501127] Key type asymmetric registered 18-35-52-478| [ KERNEL] [ 2.501132] Asymmetric key parser 'x509' registered 18-35-52-478| [ KERNEL] [ 2.501197] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) 18-35-52-478| [ KERNEL] [ 2.501202] io scheduler noop registered 18-35-52-478| [ KERNEL] [ 2.501206] io scheduler deadline registered (default) 18-35-52-478| [ KERNEL] [ 2.502214] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 18-35-52-478| [ KERNEL] [ 2.502698] ACPI: Power Button [PWRB] 18-35-52-478| [ KERNEL] [ 2.503080] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 18-35-52-478| [ KERNEL] [ 2.503118] ACPI: Power Button [PWRF] 18-35-52-478| [ KERNEL] [ 2.503605] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) 18-35-52-478| [ KERNEL] [ 2.504226] acpi device:18: registered as cooling_device0 18-35-52-478| [ KERNEL] [ 2.504491] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input2 18-35-52-478| [ KERNEL] [ 2.504854] tsc: Marking TSC unstable due to TSC halts in idle 18-35-52-478| [ KERNEL] [ 2.517054] clocksource: Switched to clocksource hpet 18-35-52-478| [ KERNEL] [ 14.613920] thermal LNXTHERM:00: registered as thermal_zone0 18-35-52-478| [ KERNEL] [ 14.613926] ACPI: Thermal Zone [THRM] (56 C) 18-35-52-478| [ KERNEL] [ 14.614995] Linux agpgart interface v0.103 18-35-52-478| [ KERNEL] [ 14.615835] zram: Added device: zram0 18-35-52-478| [ KERNEL] [ 14.618077] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 18-35-52-478| [ KERNEL] [ 14.618082] ehci-pci: EHCI PCI platform driver 18-35-52-478| [ KERNEL] [ 14.618594] ehci-pci 0000:00:10.4: EHCI Host Controller 18-35-52-478| [ KERNEL] [ 14.618615] ehci-pci 0000:00:10.4: new USB bus registered, assigned bus number 1 18-35-52-478| [ KERNEL] [ 14.618640] ehci-pci 0000:00:10.4: debug port 1 18-35-52-478| [ KERNEL] [ 14.618740] ehci-pci 0000:00:10.4: irq 23, io mem 0xf9304000 18-35-52-478| [ KERNEL] [ 14.634278] ehci-pci 0000:00:10.4: USB 2.0 started, EHCI 1.00 18-35-52-478| [ KERNEL] [ 14.634426] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 18-35-52-478| [ KERNEL] [ 14.634434] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 18-35-52-478| [ KERNEL] [ 14.634440] usb usb1: Product: EHCI Host Controller 18-35-52-478| [ KERNEL] [ 14.634447] usb usb1: Manufacturer: Linux 4.19.190 ehci_hcd 18-35-52-478| [ KERNEL] [ 14.634453] usb usb1: SerialNumber: 0000:00:10.4 18-35-52-478| [ KERNEL] [ 14.635023] hub 1-0:1.0: USB hub found 18-35-52-478| [ KERNEL] [ 14.635046] hub 1-0:1.0: 6 ports detected 18-35-52-478| [ KERNEL] [ 14.635824] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver 18-35-52-478| [ KERNEL] [ 14.635828] ohci-pci: OHCI PCI platform driver 18-35-52-478| [ KERNEL] [ 14.635921] uhci_hcd: USB Universal Host Controller Interface driver 18-35-52-478| [ KERNEL] [ 14.636382] uhci_hcd 0000:00:10.0: UHCI Host Controller 18-35-52-478| [ KERNEL] [ 14.636406] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 18-35-52-478| [ KERNEL] [ 14.636473] uhci_hcd 0000:00:10.0: irq 20, io base 0x00004400 18-35-52-478| [ KERNEL] [ 14.658235] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 18-35-52-478| [ KERNEL] [ 14.658245] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 18-35-52-478| [ KERNEL] [ 14.658252] usb usb2: Product: UHCI Host Controller 18-35-52-478| [ KERNEL] [ 14.658258] usb usb2: Manufacturer: Linux 4.19.190 uhci_hcd 18-35-52-478| [ KERNEL] [ 14.658264] usb usb2: SerialNumber: 0000:00:10.0 18-35-52-478| [ KERNEL] [ 14.658796] hub 2-0:1.0: USB hub found 18-35-52-478| [ KERNEL] [ 14.658819] hub 2-0:1.0: 2 ports detected 18-35-52-478| [ KERNEL] [ 14.659697] uhci_hcd 0000:00:10.1: UHCI Host Controller 18-35-52-478| [ KERNEL] [ 14.659717] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 18-35-52-478| [ KERNEL] [ 14.659788] uhci_hcd 0000:00:10.1: irq 22, io base 0x00004420 18-35-52-478| [ KERNEL] [ 14.659979] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 18-35-52-478| [ KERNEL] [ 14.659987] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 18-35-52-478| [ KERNEL] [ 14.659993] usb usb3: Product: UHCI Host Controller 18-35-52-478| [ KERNEL] [ 14.659999] usb usb3: Manufacturer: Linux 4.19.190 uhci_hcd 18-35-52-478| [ KERNEL] [ 14.660005] usb usb3: SerialNumber: 0000:00:10.1 18-35-52-478| [ KERNEL] [ 14.662995] hub 3-0:1.0: USB hub found 18-35-52-478| [ KERNEL] [ 14.663770] hub 3-0:1.0: 2 ports detected 18-35-52-478| [ KERNEL] [ 14.664735] uhci_hcd 0000:00:10.2: UHCI Host Controller 18-35-52-478| [ KERNEL] [ 14.664755] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 18-35-52-478| [ KERNEL] [ 14.664821] uhci_hcd 0000:00:10.2: irq 21, io base 0x00004440 18-35-52-478| [ KERNEL] [ 14.665017] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 18-35-52-478| [ KERNEL] [ 14.665024] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 18-35-52-478| [ KERNEL] [ 14.665031] usb usb4: Product: UHCI Host Controller 18-35-52-478| [ KERNEL] [ 14.665037] usb usb4: Manufacturer: Linux 4.19.190 uhci_hcd 18-35-52-478| [ KERNEL] [ 14.665043] usb usb4: SerialNumber: 0000:00:10.2 18-35-52-478| [ KERNEL] [ 14.671331] hub 4-0:1.0: USB hub found 18-35-52-478| [ KERNEL] [ 14.671373] hub 4-0:1.0: 2 ports detected 18-35-52-478| [ KERNEL] [ 14.672695] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 18-35-52-478| [ KERNEL] [ 14.673312] serio: i8042 KBD port at 0x60,0x64 irq 1 18-35-52-478| [ KERNEL] [ 14.673327] serio: i8042 AUX port at 0x60,0x64 irq 12 18-35-52-478| [ KERNEL] [ 14.673989] hv_vmbus: registering driver hyperv_keyboard 18-35-52-478| [ KERNEL] [ 14.674221] mousedev: PS/2 mouse device common for all mice 18-35-52-478| [ KERNEL] [ 14.675111] usbcore: registered new interface driver synaptics_usb 18-35-52-478| [ KERNEL] [ 14.675407] usbcore: registered new interface driver usbtouchscreen 18-35-52-478| [ KERNEL] [ 14.675661] input: PC Speaker as /devices/platform/pcspkr/input/input4 18-35-52-478| [ KERNEL] [ 14.695749] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 18-35-52-478| [ KERNEL] [ 14.700895] rtc_cmos 00:01: RTC can wake from S4 18-35-52-478| [ KERNEL] [ 14.701321] rtc_cmos 00:01: registered as rtc0 18-35-52-478| [ KERNEL] [ 14.701433] rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram, hpet irqs 18-35-52-478| [ KERNEL] [ 14.702252] cpufreq_nforce2: No nForce2 chipset 18-35-52-478| [ KERNEL] [ 14.702437] hidraw: raw HID events driver (C) Jiri Kosina 18-35-52-478| [ KERNEL] [ 14.726741] hv_vmbus: registering driver hid_hyperv 18-35-52-478| [ KERNEL] [ 14.727633] usbcore: registered new interface driver usbhid 18-35-52-478| [ KERNEL] [ 14.727637] usbhid: USB HID core driver 18-35-52-478| [ KERNEL] [ 14.728027] NET: Registered protocol family 17 18-35-52-478| [ KERNEL] [ 14.728044] mce: Unable to init MCE device (rc: -5) 18-35-52-478| [ KERNEL] [ 14.728105] mce: Using 0 MCE banks 18-35-52-478| [ KERNEL] [ 14.728117] Using IPI No-Shortcut mode 18-35-52-478| [ KERNEL] [ 14.728655] Loading compiled-in X.509 certificates 18-35-52-478| [ KERNEL] [ 14.729332] rtc_cmos 00:01: setting system clock to 2021-06-18 18:35:47 UTC (1624041347) 18-35-52-478| [ KERNEL] [ 14.750559] Freeing unused kernel image memory: 3520K 18-35-52-478| [ KERNEL] [ 14.754047] Write protecting the kernel text: 4436k 18-35-52-478| [ KERNEL] [ 14.754164] Write protecting the kernel read-only data: 1372k 18-35-52-478| [ KERNEL] [ 14.754168] Run /init as init process 18-35-52-478| [ pfac] [ 15.063840] Run /sbin/initrd. 18-35-52-478| [ pfac] [ 15.064052] Ok, PID 726. 18-35-52-478| [ initrd] [ 15.068660] WTware 6.0.52 shell. 18-35-52-478| [ initrd] [ 15.071577] HTTP: IP 192.168.1.100, port 789, path '/wtware/', slash '/'. 18-35-52-478| [ initrd] [ 15.075117] Load Ethernet drivers. 18-35-52-478| [ initrd] [ 15.084106] modprobe via-velocity. 18-35-52-478| [ KERNEL] [ 15.092489] VIA Networking Velocity Family Gigabit Ethernet Adapter Driver Ver. 1.15 18-35-52-478| [ KERNEL] [ 15.092495] Copyright (c) 2002, 2003 VIA Networking Technologies, Inc. 18-35-52-478| [ KERNEL] [ 15.092497] Copyright (c) 2004 Red Hat Inc. 18-35-52-478| [ KERNEL] [ 15.093802] eth0: VIA Networking Velocity Family Gigabit Ethernet Adapter 18-35-52-478| [ KERNEL] [ 15.093809] eth0: Ethernet Address: 00:80:64:ac:01:c5 18-35-52-478| [ initrd] [ 15.116136] NIC module via-velocity.ko loaded. 18-35-52-478| [ KERNEL] [ 15.176343] Velocity is AUTO mode 18-35-52-478| [ KERNEL] [ 15.181333] usb 3-1: new full-speed USB device number 2 using uhci_hcd 18-35-52-478| [ initrd] [ 15.180154] eth0: 1106:3119. Apply WOL configuration. 18-35-52-478| [ KERNEL] [ 15.376950] usb 3-1: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01 18-35-52-478| [ KERNEL] [ 15.376973] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 18-35-52-478| [ KERNEL] [ 15.376990] usb 3-1: Product: USB Receiver 18-35-52-478| [ KERNEL] [ 15.377005] usb 3-1: Manufacturer: Logitech 18-35-52-478| [ KERNEL] [ 15.396759] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:10.1/usb3/3-1/3-1:1.0/0003:046D:C534.0001/input/input7 18-35-52-478| [ KERNEL] [ 15.456356] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:10.1-1/input0 18-35-52-478| [ KERNEL] [ 15.504516] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:10.1/usb3/3-1/3-1:1.1/0003:046D:C534.0002/input/input8 18-35-52-478| [ KERNEL] [ 15.506370] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:10.1/usb3/3-1/3-1:1.1/0003:046D:C534.0002/input/input9 18-35-52-478| [ KERNEL] [ 15.566763] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:10.1/usb3/3-1/3-1:1.1/0003:046D:C534.0002/input/input10 18-35-52-478| [ KERNEL] [ 15.567983] hid-generic 0003:046D:C534.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:10.1-1/input1 18-35-52-478| [ KERNEL] [ 16.105843] usb 3-2: new full-speed USB device number 3 using uhci_hcd 18-35-52-478| [ KERNEL] [ 16.308944] usb 3-2: New USB device found, idVendor=2912, idProduct=0008, bcdDevice= 2.00 18-35-52-478| [ KERNEL] [ 16.308966] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 18-35-52-478| [ KERNEL] [ 16.308983] usb 3-2: Product: ATOL USB device 18-35-52-478| [ KERNEL] [ 16.308998] usb 3-2: Manufacturer: ATOL Group 18-35-52-478| [ KERNEL] [ 16.309013] usb 3-2: SerialNumber: 00109320830707 18-35-52-478| [ KERNEL] [ 16.329807] random: fast init done 18-35-52-478| [ KERNEL] [ 16.777360] eth0: Link auto-negotiation 18-35-52-478| [ KERNEL] [ 16.777366] speed 100M bps 18-35-52-478| [ KERNEL] [ 16.777376] full duplex 18-35-52-478| [ initrd] [ 17.193252] dhcp: 342 bytes from 192.168.1.1. 18-35-52-478| [ initrd] [ 17.193554] 00000000:000001420000000000110000C0A80101C0A801CA004300440142000002010600 ...B................C.D.B...... 18-35-52-478| [ initrd] [ 17.193784] 00000020:67458B6B0000000000000000C0A801CAC0A8016400000000008064AC01C50000 gE.k...............d......d..... 18-35-52-478| [ initrd] [ 17.194007] 00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................ 18-35-52-478| [ initrd] [ 17.194225] 00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................ 18-35-52-478| [ initrd] [ 17.194444] 00000080:0000000000000000362E302E35322F7774776172652E68747470000000000000 ........6.0.52/wtware.http...... 18-35-52-478| [ initrd] [ 17.194665] 000000a0:0000000000000000000000000000000000000000000000000000000000000000 ................................ 18-35-52-478| [ initrd] [ 17.194882] 000000c0:0000000000000000000000000000000000000000000000000000000000000000 ................................ 18-35-52-478| [ initrd] [ 17.195099] 000000e0:0000000000000000000000000000000000000000000000000000000000000000 ................................ 18-35-52-478| [ initrd] [ 17.195317] 00000100:0000000000000000638253633501023604C0A801013304000003840104FFFFFF ........c.Sc5..6.....3.......... 18-35-52-478| [ initrd] [ 17.195637] 00000120:000304C0A801010604C0A8010112206634643266306430643130376532393739 ............. f4d2f0d0d107e2979 18-35-52-478| [ initrd] [ 18.202214] dhcp: 342 bytes from 192.168.1.1. 18-35-52-478| [ initrd] [ 18.202502] 00000000:000001420000000000110000C0A80101C0A801CA004300440142000002010600 ...B................C.D.B...... 18-35-52-478| [ initrd] [ 18.202729] 00000020:67458B6B0000000000000000C0A801CAC0A8016400000000008064AC01C50000 gE.k...............d......d..... 18-35-52-478| [ initrd] [ 18.202948] 00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................ 18-35-52-478| [ initrd] [ 18.203200] 00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................ 18-35-52-478| [ initrd] [ 18.203423] 00000080:0000000000000000362E302E35322F7774776172652E68747470000000000000 ........6.0.52/wtware.http...... 18-35-52-478| [ initrd] [ 18.203748] 000000a0:0000000000000000000000000000000000000000000000000000000000000000 ................................ 18-35-52-478| [ initrd] [ 18.203979] 000000c0:0000000000000000000000000000000000000000000000000000000000000000 ................................ 18-35-52-478| [ initrd] [ 18.204200] 000000e0:0000000000000000000000000000000000000000000000000000000000000000 ................................ 18-35-52-478| [ initrd] [ 18.204424] 00000100:0000000000000000638253633501053604C0A801013304000003840104FFFFFF ........c.Sc5..6.....3.......... 18-35-52-478| [ initrd] [ 18.204643] 00000120:000304C0A801010604C0A8010112206634643266306430643130376532393739 ............. f4d2f0d0d107e2979 18-35-52-478| [ initrd] [ 18.204887] [DHCP] DHCP server address 192.168.1.1. 18-35-52-478| [ initrd] [ 18.205092] [DHCP] IP 192.168.1.202 mask 255.255.255.0. 18-35-52-478| [ initrd] [ 18.205287] [DHCP] Default gateway 192.168.1.1. 18-35-52-478| [ initrd] [ 18.205482] [DHCP] DNS 192.168.1.1. 18-35-52-478| [ initrd] [ 18.205675] [DHCP] NTP 192.168.1.1. 18-35-52-478| [ initrd] [ 18.205870] [DHCP] HTTP IP 192.168.1.100 already specified. 18-35-52-478| [ initrd] [ 18.206060] [DHCP] WTPassword hash f4d2f0d0d107e29795649a043cfb15ea. 18-35-52-478| WTC listener is active. 18-35-52-478| WTC broadcast listener is active. 18-35-52-478| Send broadcast WTCU discover. 18-35-52-478| [ initrd] [ 18.209644] [HTTP] Download and unpack file /wtware/6.0.52/packages/lib6 from 192.168.1.100. 18-35-52-479| Connection from wtc.exe at 192.168.1.100. 18-35-54-319| [ initrd] [ 20.905608] PCI: C 06 1106:2409 Bridge VIA Technologies, Inc. VX855/VX875 Host Bus Control. 18-35-54-390| [ initrd] [ 20.905790] PCI: C 02 1106:3119 Network controller VIA Technologies, Inc. VT6120/VT6121/VT6122 Gigabit Ethernet Adapter. 18-35-54-390| [ initrd] [ 20.905881] PCI: C 01:01 1106:c409 Mass storage controller IDE interface VIA Technologies, Inc. VX855/VX875 EIDE Controller. 18-35-54-390| [ initrd] [ 20.905960] PCI: C 06 1106:0409 Bridge VIA Technologies, Inc. VX855/VX875 Host Bridge: Host Control. 18-35-54-390| [ initrd] [ 20.906041] PCI: C 0c:03 1106:3038 Serial bus controller USB controller VIA Technologies, Inc. VT82xx/62xx/VX700/8x0/900 UHCI USB 1.1 Controller. 18-35-54-390| [ initrd] [ 20.906118] PCI: C 06 1106:7409 Bridge VIA Technologies, Inc. VX855/VX875 North-South Module Interface Control. 18-35-54-390| [ initrd] [ 20.906195] PCI: C 08 1106:5409 Generic system peripheral VIA Technologies, Inc. VX855/VX875 APIC and Central Traffic Control. 18-35-54-390| [ initrd] [ 20.906271] PCI: C 06 1106:3409 Bridge VIA Technologies, Inc. VX855/VX875 DRAM Bus Control. 18-35-54-390| [ initrd] [ 20.906350] PCI: C 06:01 1106:8409 Bridge ISA bridge VIA Technologies, Inc. VX855/VX875 Bus Control and Power Management. 18-35-54-390| [ initrd] [ 20.906432] PCI: C 04:03 1106:3288 Multimedia controller Audio device VIA Technologies, Inc. VX900/VT8xxx High Definition Audio Controller. 18-35-54-390| [ initrd] [ 20.906509] PCI: C 06 1106:1409 Bridge VIA Technologies, Inc. VX855/VX875 Error Reporting. 18-35-54-390| [ initrd] [ 20.906589] PCI: C 0c:03 1106:3104 Serial bus controller USB controller VIA Technologies, Inc. USB 2.0 EHCI-Compliant Host-Controller. 18-35-54-390| [ initrd] [ 20.906691] PCI: C 06 1106:a353 Bridge VIA Technologies, Inc. VX8xx/900 Series South-North Module Interface Control. 18-35-54-390| [ initrd] [ 20.906781] PCI: C 03 1106:5122 Display controller VIA Technologies, Inc. VX855/VX875 Chrome 9 HCM Integrated Graphics. 18-35-54-390| [ initrd] [ 20.906859] PCI: C 06 1106:6409 Bridge VIA Technologies, Inc. VX855/VX875 Scratch Registers. 18-35-54-390| [ initrd] [ 20.906937] PCI: C 06:04 1106:b353 Bridge PCI bridge VIA Technologies, Inc. VX855/VX875/VX900 PCI to PCI Bridge. 18-35-54-390| [ initrd] [ 20.907012] PCI: C 06 1106:4409 Bridge VIA Technologies, Inc. VX855/VX875 Power Management Control. 18-35-54-472| [HTTP] '/wtware/Everyone\source.wtc' => 'C:\ProgramData\WTware\Everyone\source.wtc'. 18-35-54-472| [HTTP] '/wtware/Everyone\list.wtc' => 'C:\ProgramData\WTware\Everyone\list.wtc'. 18-35-54-472| [HTTP] '/wtware/Terminals\00.80.64.AC.01.C5\config.wtc' => 'C:\ProgramData\WTware\Terminals\00.80.64.AC.01.C5\config.wtc'. 18-35-54-472| [HTTP] '/wtware/Terminals\00.80.64.AC.01.C5\wtware.lic' => 'C:\ProgramData\WTware\Terminals\00.80.64.AC.01.C5\wtware.lic'. 18-35-54-472| [HTTP] Failed to open file. 18-35-54-472| [HTTP] '/wtware/Everyone\all.wtc' => 'C:\ProgramData\WTware\Everyone\all.wtc'. 18-35-54-472| [ initrd] [ 20.992484] USB: 2912:0008 Audioengine. 18-35-54-472| [ initrd] [ 20.992596] USB: 046d:c534 Logitech, Inc. Unifying Receiver. 18-35-54-472| [ initrd] [ 20.993919] Run '/sbin/httpd', log '/tmp/httpd.out', env '', pid ''. 18-35-54-472| [ pfac] [ 20.994336] Run /sbin/httpd. 18-35-54-472| [ pfac] [ 20.994399] Ok, PID 775. 18-35-54-472| [ initrd] [ 20.994591] [HTTP] Download config file /wtware/Everyone/source.wtc from 192.168.1.100. 18-35-54-472| [ initrd] [ 20.997751] [HTTP] Download config file /wtware/Everyone/list.wtc from 192.168.1.100. 18-35-54-472| [ initrd] [ 21.000889] [HTTP] Download config file /wtware/Terminals/00.80.64.AC.01.C5/config.wtc from 192.168.1.100. 18-35-54-472| [ initrd] [ 21.003594] [HTTP] Download config file /wtware/Terminals/00.80.64.AC.01.C5/wtware.lic from 192.168.1.100. 18-35-54-472| [ initrd] [ 21.006171] [HTTP] File not found. 18-35-54-472| /--- FILE "/tmp/config.wtc" ----------------------- 18-35-54-472| | clienthostname=office02 18-35-54-472| | user=office02:ILL9DzEdtDgXm9Fo/m0Ahw 18-35-54-472| | bpp=32 18-35-54-472| | display=1440x900 18-35-54-472| | ser2net=usb 2912:0008 115200 18-35-54-472| | connection 18-35-54-472| \---------------------------------------------------- 18-35-54-472| [ initrd] [ 21.006706] [HTTP] Download config file /wtware/Everyone/all.wtc from 192.168.1.100. 18-35-54-472| /--- FILE "/tmp/all.wtc" ----------------------- 18-35-54-472| | [BOM] 18-35-54-472| | server=192.168.1.100 18-35-54-472| | disk=usb 18-35-54-472| | language=ru 18-35-54-472| | ntp=ru.pool.ntp.org 18-35-54-472| | timezone=local:Asia/Novokuznetsk 18-35-54-472| | turnoffmenu=poweroff 18-35-54-472| | wtrc=on 18-35-54-472| | wtrc_password=mode:none 18-35-54-472| | graphic=ef 18-35-54-472| \---------------------------------------------------- 18-35-54-472| [ initrd] [ 21.009603] [HTTP] Download config file /wtware/Everyone/wtware.lic from 192.168.1.100. 18-35-54-472| [ httpd] [ 21.010161] Internal HTTP Server, WTware 6.0.52 18-35-54-472| [HTTP] '/wtware/Everyone\wtware.lic' => 'C:\ProgramData\WTware\Everyone\wtware.lic'. 18-35-54-472| [HTTP] '/wtware/6.0.52\packages\tz' => 'C:\Program Files (x86)\WTware\TFTPDROOT\6.0.52\packages\tz'. 18-35-54-609| /--- FILE "/etc/config.compiled" ----------------------- 18-35-54-609| | [BOM] 18-35-54-609| | server=192.168.1.100 18-35-54-609| | disk=usb 18-35-54-609| | language=ru 18-35-54-609| | ntp=ru.pool.ntp.org 18-35-54-609| | timezone=local:Asia/Novokuznetsk 18-35-54-609| | turnoffmenu=poweroff 18-35-54-609| | wtrc=on 18-35-54-609| | wtrc_password=mode:none 18-35-54-609| | graphic=ef 18-35-54-609| | clienthostname=office02 18-35-54-609| | user=office02:ILL9DzEdtDgXm9Fo/m0Ahw 18-35-54-609| | bpp=32 18-35-54-609| | display=1440x900 18-35-54-609| | ser2net=usb 2912:0008 115200 18-35-54-609| | connection 18-35-54-609| \---------------------------------------------------- 18-35-54-609| [ initrd] [ 21.014465] Hostname: "office02". 18-35-54-609| [ initrd] [ 21.027109] [HTTP] Download and unpack file /wtware/6.0.52/packages/tz from 192.168.1.100. 18-35-54-609| [ initrd] [ 21.170749] Run '/bin/sh /tmp/ntpdate', log '/tmp/ntp.out', env '', pid ''. 18-35-54-609| [ pfac] [ 21.171288] Run /bin/sh /tmp/ntpdate. 18-35-54-609| [ pfac] [ 21.171357] Ok, PID 776. 18-35-54-609| Everyone can control terminal by RSH. 18-35-54-609| RSH: listener is active. 18-35-54-609| Send broadcast WTCU discover. 18-35-54-609| [ httpd] [ 21.175796] Reread settings. 18-35-54-609| [ httpd] [ 21.175875] Everyone can control terminal by HTTP. 18-35-54-609| [ initrd] [ 21.187144] Use 'video=viafb(F)' driver. 18-35-54-609| /--- FILE "/etc/config.compiled" ----------------------- 18-35-54-609| | [BOM] 18-35-54-609| | server=192.168.1.100 18-35-54-609| | disk=usb 18-35-54-609| | language=ru 18-35-54-609| | ntp=ru.pool.ntp.org 18-35-54-609| | timezone=local:Asia/Novokuznetsk 18-35-54-609| | turnoffmenu=poweroff 18-35-54-609| | wtrc=on 18-35-54-609| | wtrc_password=mode:none 18-35-54-609| | graphic=ef 18-35-54-609| | clienthostname=office02 18-35-54-609| | user=office02:ILL9DzEdtDgXm9Fo/m0Ahw 18-35-54-609| | bpp=32 18-35-54-609| | display=1440x900 18-35-54-609| | ser2net=usb 2912:0008 115200 18-35-54-609| | video=viafb(F) 18-35-54-609| | connection 18-35-54-609| \---------------------------------------------------- 18-35-54-609| [ initrd] [ 21.187953] [HTTP] Download and unpack file /wtware/6.0.52/packages/f-drm from 192.168.1.100. 18-35-54-609| [HTTP] '/wtware/6.0.52\packages\f-drm' => 'C:\Program Files (x86)\WTware\TFTPDROOT\6.0.52\packages\f-drm'. 18-35-54-795| [HTTP] '/wtware/6.0.52\packages\fwt6' => 'C:\Program Files (x86)\WTware\TFTPDROOT\6.0.52\packages\fwt6'. 18-35-54-864| [ NTP] [ 21.194315] ntpd: 'ru.pool.ntp.org' is 62.231.6.98 18-35-54-864| [ NTP] [ 21.194365] ntpd: sending query to 62.231.6.98 18-35-54-864| [ NTP] [ 21.264872] ntpd: reply from 62.231.6.98: offset:-25200.428488 delay:0.065559 status:0x24 strat:1 refid:0x00535047 rootdelay:0.000000 reach:0x01 18-35-54-864| [ initrd] [ 21.380725] [HTTP] Download and unpack file /wtware/6.0.52/packages/fwt6 from 192.168.1.100. 18-35-55-443| [ initrd] [ 22.030263] [HTTP] Download and unpack file /wtware/6.0.52/packages/f from 192.168.1.100. 18-35-55-509| [HTTP] '/wtware/6.0.52\packages\f' => 'C:\Program Files (x86)\WTware\TFTPDROOT\6.0.52\packages\f'. 18-35-55-679| [ NTP] [ 22.266048] ntpd: sending query to 62.231.6.98 18-35-55-774| [HTTP] '/wtware/6.0.52\packages\graphic' => 'C:\Program Files (x86)\WTware\TFTPDROOT\6.0.52\packages\graphic'. 18-35-55-879| [ NTP] [ 22.332409] ntpd: reply from 62.231.6.98: offset:-25200.428144 delay:0.065511 status:0x24 strat:1 refid:0x00535047 rootdelay:0.000000 reach:0x03 18-35-55-879| [ NTP] [ 22.332451] ntpd: setting time to 2021-06-18 18:35:54.676571 (offset -25200.428144s) 18-35-55-879| [ NTP] [ 22.346425] Fri Jun 18 18:35:54 2021 0.000000 seconds 18-35-55-879| [ pfac] [ 22.353645] Process pid 776 terminated, status 00000000. 18-35-55-943| [ initrd] [ 22.357647] [HTTP] Download and unpack file /wtware/6.0.52/packages/graphic from 192.168.1.100. 18-35-56-080| [ KERNEL] [ 22.551330] random: crng init done 18-35-56-080| [ gm] [ 22.563081] WTware 6.0.52 session manager. 18-35-56-080| [ KERNEL] [ 22.568032] input: Remote Control Keyboard as /devices/virtual/input/input13 18-35-56-080| [ gm] [ 22.579699] Keys found. Add event9: Remote Control Keyboard. 18-35-56-080| [ gm] [ 22.579783] Keys found. Add event8: Logitech USB Receiver System Control. 18-35-56-080| [ gm] [ 22.579826] EV_REL flag found. Add event7: Logitech USB Receiver Consumer Control. 18-35-56-080| [ gm] [ 22.579868] EV_REL flag found. Add event6: Logitech USB Receiver Mouse. 18-35-56-080| [ gm] [ 22.579909] Keys found. Add event5: Logitech USB Receiver. 18-35-56-080| [ gm] [ 22.579950] Keys found. Add event4: AT Translated Set 2 keyboard. 18-35-56-080| [ gm] [ 22.579990] Ignore event3: PC Speaker. 18-35-56-080| [ gm] [ 22.580031] Keys found. Add event2: Video Bus. 18-35-56-080| [ gm] [ 22.580071] Keys found. Add event1: Power Button. 18-35-56-080| [ gm] [ 22.580112] Keys found. Add event0: Power Button. 18-35-56-080| [ gm] [ 22.580152] Display mode: 1440x900, 32 bit, landscape, 0 Hz, modeline "", DDC enabled, connector 0. 18-35-57-703| [ gm] [ 24.289813] Run modprobe viafb viafb_mode=1440x900 viafb_bpp=32. 18-35-57-903| [ gm] [ 24.289995] modprobe viafb viafb_mode=1440x900 viafb_bpp=32. 18-35-57-903| [ KERNEL] [ 24.311323] VIA Graphics Integration Chipset framebuffer 2.4 initializing 18-35-57-903| [ KERNEL] [ 24.318964] viafb: Probing I2C bus 0x26 18-35-57-903| [ KERNEL] [ 24.368126] viafb: Probing I2C bus 0x31 18-35-57-903| [ KERNEL] [ 24.397422] EDID: VSC VA1948 SERIES 18-35-57-903| [ KERNEL] [ 24.400313] viafb: Found VT1632 DVI Transmitter at address 0x8 18-35-57-903| [ KERNEL] [ 24.426577] viafb: Probing I2C bus 0x2C 18-35-58-104| [ KERNEL] [ 24.457337] viafb: Finished I2C bus probing 18-35-58-104| [ KERNEL] [ 24.479744] fbcon: Via (fb0) is primary device 18-35-58-104| [ KERNEL] [ 24.525814] Console: switching to colour frame buffer device 180x56 18-35-58-104| [ gm] [ 24.619285] Kernel framebuffer module loaded. 18-35-58-104| [ gm] [ 24.626492] Framebuffer device found. 18-35-58-104| [ gm] [ 24.626617] Final framebuffer videomode (driver defaults): 1440x900-32@60. 18-35-58-104| [ gm] [ 24.626699] xres 1440, xres_virtual 1440, yres 900, yres_virtual 900, bits_per_pixel 32 18-35-58-104| [ gm] [ 24.626779] VSI.pixclock 9372, sync 00000002 18-35-58-104| [ gm] [ 24.626853] left_margin 232, right_margin 80, hsync_len 152 18-35-58-104| [ gm] [ 24.626928] upper_margin 25, lower_margin 3, vsync_len 6 18-35-58-104| [ gm] [ 24.627018] LINELENBYTES 5760 18-35-58-104| [ gm] [ 24.627093] VLEN 5184000 18-35-58-104| [ gm] [ 24.676380] Use /lib/ui32.so. 18-35-58-303| [ gm] [ 24.785386] WMEMCOPY: 48375K copied in 0.089249 sec. 18-35-58-503| [ gm] [ 24.913102] libc: 48375K copied in 0.127512 sec. 18-35-58-503| [ gm] [ 25.001742] movs: 48375K copied in 0.088442 sec. 18-35-58-704| [ gm] [ 25.093040] MMX: 48375K copied in 0.091099 sec. 18-35-58-704| [ gm] [ 25.191872] SSE2: 48375K copied in 0.098641 sec. 18-35-58-704| [ gm] [ 25.191979] Choose movs memcpy. 18-35-58-704| [ gm] [ 25.202170] Load ISO 9660 and UDF CDROM filesystem drivers. 18-35-58-704| [ gm] [ 25.202283] modprobe udf. 18-35-58-704| [ gm] [ 25.210036] modprobe isofs. 18-35-58-704| [ gm] [ 25.221226] Load VFAT filesystem driver. 18-35-58-704| [ gm] [ 25.221309] modprobe fat. 18-35-58-704| [ gm] [ 25.233203] modprobe vfat. 18-35-58-704| [ gm] [ 25.246340] Load usb storage driver. 18-35-58-704| [ gm] [ 25.246423] modprobe scsi_mod. 18-35-58-704| [ gm] [ 25.258908] modprobe usb-storage. 18-35-58-704| [ KERNEL] [ 25.260001] SCSI subsystem initialized 18-35-58-704| [ gm] [ 25.278748] modprobe uas. 18-35-58-704| [ KERNEL] [ 25.279898] usbcore: registered new interface driver usb-storage 18-35-58-816| [ gm] [ 25.291589] modprobe sd_mod. 18-35-58-816| [ KERNEL] [ 25.292656] usbcore: registered new interface driver uas 18-35-58-816| [ gm] [ 25.306182] Load usb <-> serial bridge drivers. 18-35-58-816| [ gm] [ 25.306267] modprobe usbserial. 18-35-58-816| [ gm] [ 25.321441] modprobe pl2303. 18-35-58-816| [ KERNEL] [ 25.322462] usbcore: registered new interface driver usbserial_generic 18-35-58-816| [ KERNEL] [ 25.322545] usbserial: USB Serial support registered for generic 18-35-58-816| [ gm] [ 25.338339] modprobe ftdi_sio. 18-35-58-816| [ KERNEL] [ 25.339261] usbcore: registered new interface driver pl2303 18-35-58-816| [ KERNEL] [ 25.339392] usbserial: USB Serial support registered for pl2303 18-35-58-816| [ gm] [ 25.357789] modprobe cp210x. 18-35-58-816| [ KERNEL] [ 25.358387] usbcore: registered new interface driver ftdi_sio 18-35-58-816| [ KERNEL] [ 25.358507] usbserial: USB Serial support registered for FTDI USB Serial Device 18-35-58-816| [ gm] [ 25.373293] modprobe ch341. 18-35-58-816| [ KERNEL] [ 25.374194] usbcore: registered new interface driver cp210x 18-35-58-816| [ KERNEL] [ 25.374311] usbserial: USB Serial support registered for cp210x 18-35-58-816| [ gm] [ 25.387697] modprobe metro-usb. 18-35-58-816| [ KERNEL] [ 25.388575] usbcore: registered new interface driver ch341 18-35-58-816| [ KERNEL] [ 25.388710] usbserial: USB Serial support registered for ch341-uart 18-35-58-816| [ gm] [ 25.402054] modprobe symbolserial. 18-35-58-816| [ KERNEL] [ 25.403042] usbcore: registered new interface driver metro_usb 18-35-58-816| [ KERNEL] [ 25.403170] usbserial: USB Serial support registered for Metrologic USB to Serial 18-35-58-881| [ KERNEL] [ 25.417666] usbcore: registered new interface driver symbolserial 18-35-58-881| [ gm] [ 25.416960] modprobe opticon. 18-35-58-881| [ KERNEL] [ 25.418047] usbserial: USB Serial support registered for symbol 18-35-58-881| [ gm] [ 25.431319] modprobe cdc-acm. 18-35-58-881| [ KERNEL] [ 25.432288] usbcore: registered new interface driver opticon 18-35-58-881| [ KERNEL] [ 25.432433] usbserial: USB Serial support registered for opticon 18-35-58-881| [ gm] [ 25.446501] modprobe mxu11x0. 18-35-58-881| [ KERNEL] [ 25.447661] usbcore: registered new interface driver cdc_acm 18-35-58-881| [ KERNEL] [ 25.447666] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters 18-35-58-881| [ KERNEL] [ 25.460718] usbcore: registered new interface driver mxu11x0 18-35-58-881| [ KERNEL] [ 25.460848] usbserial: USB Serial support registered for MOXA UPort 1110 18-35-58-881| [ KERNEL] [ 25.460922] usbserial: USB Serial support registered for MOXA UPort 1130 18-35-58-881| [ KERNEL] [ 25.461012] usbserial: USB Serial support registered for MOXA UPort 1150 18-35-58-881| [ KERNEL] [ 25.461085] usbserial: USB Serial support registered for MOXA UPort 1150I 18-35-58-881| [ KERNEL] [ 25.461158] usbserial: USB Serial support registered for MOXA UPort 1130I 18-35-58-881| [ KERNEL] [ 25.461233] usbserial: USB Serial support registered for MOXA USB Console 18-35-58-881| [ KERNEL] [ 25.461250] mxu11x0: 1.3.13:MOXA UPort 11x0 USB to Serial Hub Driver 18-35-58-881| [ gm] [ 25.460595] modprobe ti_usb_3410_5052. 18-35-58-950| [HTTP] '/wtware/6.0.52\packages\fs' => 'C:\Program Files (x86)\WTware\TFTPDROOT\6.0.52\packages\fs'. 18-35-59-073| [ gm] [ 25.486728] Load EXFAT filesystem driver. 18-35-59-073| [ KERNEL] [ 25.487876] usbcore: registered new interface driver ti_usb_3410_5052 18-35-59-073| [ KERNEL] [ 25.488009] usbserial: USB Serial support registered for TI USB 3410 1 port adapter 18-35-59-073| [ KERNEL] [ 25.488086] usbserial: USB Serial support registered for TI USB 5052 2 port adapter 18-35-59-073| [ gm] [ 25.486857] [HTTP] Download and unpack file /wtware/6.0.52/packages/fs from 192.168.1.100. 18-35-59-273| [ gm] [ 25.663809] modprobe fuse. 18-35-59-273| [ KERNEL] [ 25.673601] fuse init (API version 7.27) 18-35-59-273| [ gm] [ 25.673318] modprobe exfat. 18-35-59-273| [ KERNEL] [ 25.690921] exFAT: Version 1.2.9 18-36-02-135| [ gm] [ 28.721904] [ser2net] USB <-> serial bridge with USB ID 2912:0008 BUS ID '' serial number '' not found. 18-36-02-234| [ gm] [ 28.775576] Run '/sbin/resolver 0x1eb72e0 dns [192.168.1.100]', log '', env '', pid ''. 18-36-02-234| [ pfac] [ 28.776079] Run /sbin/resolver 0x1eb72e0 dns [192.168.1.100]. 18-36-02-234| [ pfac] [ 28.776153] Ok, PID 888. 18-36-02-234| [ gm] [ 28.776324] Nobody can control terminal by VNC. 18-36-02-234| [ gm] [ 28.776417] Everyone can control terminal by WTRC. 18-36-02-234| [ gm] [ 28.776525] [WTRC] Remote control without password. 18-36-02-234| [ pfac] [ 28.784106] Process pid 888 terminated, status 00000000. 18-36-02-234| [ gm] [ 28.788755] [WTRC] Listener at TCP port 789. 18-36-02-234| [ gm] [ 28.789361] 192.168.1.100 => 192.168.1.100. 18-36-02-234| [ gm] [ 28.798404] Free ram before fork terminal client /sbin/rdpclient-SSE (session 1): 342892 Kb. 18-36-02-234| [ gm] [ 28.798525] Run '/sbin/rdpclient-SSE 1', log '/tmp/rdpclient.out', env '', pid ''. 18-36-02-234| [ pfac] [ 28.798937] Run /sbin/rdpclient-SSE 1. 18-36-02-234| [ pfac] [ 28.799008] Ok, PID 891. 18-36-02-234| [ rdpclient 891] [ 28.813811] RDP Terminal Client, WTware 6.0.52, pipe 1, pid 891. 18-36-02-234| [ rdpclient 891] [ 28.814346] Use /lib/ui32-SSE.so. 18-36-02-234| [ rdpclient 891] [ 28.819856] Make RDP session with 192.168.1.100, port 3389. 18-36-02-234| [ rdpclient 891] [ 28.819967] Username: "office02". 18-36-02-234| [ rdpclient 891] [ 28.820044] Password: present. 18-36-02-234| [ rdpclient 891] [ 28.820117] No PIN. 18-36-02-302| [ rdpclient 891] [ 28.820189] No domain. 18-36-02-302| [ rdpclient 891] [ 28.820308] No shell. 18-36-02-302| [ rdpclient 891] [ 28.820402] No directory. 18-36-02-302| [ rdpclient 891] [ 28.820481] Window: 1376x900@24. 18-36-02-302| [ rdpclient 891] [ 28.820557] PFlags 0x0000008F. 18-36-02-302| [ rdpclient 891] [ 28.820633] Keyboard 00000409:00000000. 18-36-02-302| [ rdpclient 891] [ 28.820707] My hostname "office02". 18-36-02-302| [ rdpclient 891] [ 28.820784] TCP: connecting to 192.168.1.100:3389. 18-36-02-435| [ rdpclient 891] [ 28.821483] TCP: connection with 192.168.1.100:3389 established. 18-36-02-435| [ rdpclient 891] [ 28.821585] Turn keepalive on. 18-36-02-435| [ rdpclient 891] [ 28.822674] Free ram after buffers allocation: 342164 KB. 18-36-02-435| [ rdpclient 891] [ 28.828055] RDP 5.0..8.1 server. 18-36-02-435| [ rdpclient 891] [ 28.828123] Process RDP server certificate. 18-36-02-435| [ rdpclient 891] [ 28.828166] RDP5 encryption (X.509). 18-36-02-435| [ rdpclient 891] [ 28.833482] Enable font smoothing. 18-36-02-435| [ rdpclient 891] [ 28.837268] License: STATUS_VALID_CLIENT. 18-36-02-435| [ rdpclient 891] [ 28.912012] 32-bit color. 18-36-02-957| [ rdpclient 891] [ 29.543417] errorInfo 0x00000000. 18-36-03-154| [ rdpclient 891] [ 29.626815] SessionId 0x00000009: EMRSRV\office02. 18-36-53-848| [WTRC] [18.06.2021 18:36:53] TCP connection with 192.168.1.202:789 established. 18-36-53-916| [ gm] [ 80.435720] [WTRC] Connection from 192.168.1.100. 18-36-53-984| [WTRC] [18.06.2021 18:36:53] SSL connected. 18-36-53-984| [WTRC] [18.06.2021 18:36:53] Received message WTRC_L2W_SCREENS 18-36-53-984| [WTRC] [18.06.2021 18:36:53] display 1, 1440x900, resolution 32 bit