WTware v.5.1.36
WTware 5.1.36 supervisor.
WTC listener active.
WTC broadcast listener active.
HTTPd listener active.
[KERNEL] Linux version 3.9.4 (root@c5) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #1 PREEMPT Sun May 26 16:23:49 MSK 2013
[KERNEL] KERNEL supported cpus:
[KERNEL] Intel GenuineIntel
[KERNEL] AMD AuthenticAMD
[KERNEL] NSC Geode by NSC
[KERNEL] Cyrix CyrixInstead
[KERNEL] Centaur CentaurHauls
[KERNEL] Transmeta GenuineTMx86
[KERNEL] Transmeta TransmetaCPU
[KERNEL] UMC UMC UMC UMC
[KERNEL] e820: BIOS-provided physical RAM map:
[KERNEL] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[KERNEL] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[KERNEL] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[KERNEL] BIOS-e820: [mem 0x0000000000100000-0x0000000067a3efff] usable
[KERNEL] BIOS-e820: [mem 0x0000000067a3f000-0x0000000067a86fff] ACPI NVS
[KERNEL] BIOS-e820: [mem 0x0000000067a87000-0x0000000067a8dfff] ACPI data
[KERNEL] BIOS-e820: [mem 0x0000000067a8e000-0x0000000067a90fff] ACPI NVS
[KERNEL] BIOS-e820: [mem 0x0000000067a91000-0x0000000067bd5fff] reserved
[KERNEL] BIOS-e820: [mem 0x0000000067bd6000-0x0000000067bd6fff] usable
[KERNEL] BIOS-e820: [mem 0x0000000067bd7000-0x0000000067be6fff] reserved
[KERNEL] BIOS-e820: [mem 0x0000000067be7000-0x0000000067beefff] ACPI NVS
[KERNEL] BIOS-e820: [mem 0x0000000067bef000-0x0000000067c15fff] reserved
[KERNEL] BIOS-e820: [mem 0x0000000067c16000-0x0000000067c58fff] ACPI NVS
[KERNEL] BIOS-e820: [mem 0x0000000067c59000-0x0000000067dc3fff] usable
[KERNEL] BIOS-e820: [mem 0x0000000067dc4000-0x0000000067ef5fff] reserved
[KERNEL] BIOS-e820: [mem 0x0000000067ef6000-0x0000000067efffff] usable
[KERNEL] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[KERNEL] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[KERNEL] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[KERNEL] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[KERNEL] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[KERNEL] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
[KERNEL] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[KERNEL] SMBIOS 2.7 present.
[KERNEL] DMI: FOXCONN nT-A3000 series/nT-A3000 series, BIOS 4.6.4 12/29/2011
[KERNEL] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[KERNEL] e820: remove [mem 0x000a0000-0x000fffff] usable
[KERNEL] e820: last_pfn = 0x67f00 max_arch_pfn = 0x100000
[KERNEL] MTRR default type: uncachable
[KERNEL] MTRR fixed ranges enabled:
[KERNEL] 00000-9FFFF write-back
[KERNEL] A0000-BFFFF write-through
[KERNEL] C0000-CFFFF write-protect
[KERNEL] D0000-E7FFF uncachable
[KERNEL] E8000-FFFFF write-protect
[KERNEL] MTRR variable ranges enabled:
[KERNEL] 0 base 000000000 mask F80000000 write-back
[KERNEL] 1 base 067F00000 mask FFFF00000 uncachable
[KERNEL] 2 base 068000000 mask FF8000000 uncachable
[KERNEL] 3 base 070000000 mask FF0000000 uncachable
[KERNEL] 4 disabled
[KERNEL] 5 disabled
[KERNEL] 6 disabled
[KERNEL] 7 disabled
[KERNEL] found SMP MP-table at [mem 0x000fcd30-0x000fcd3f] mapped at [c00fcd30]
[KERNEL] initial memory mapped: [mem 0x00000000-0x007fffff]
[KERNEL] Base memory trampoline at [c0099000] 99000 size 16384
[KERNEL] init_memory_mapping: [mem 0x00000000-0x000fffff]
[KERNEL] [mem 0x00000000-0x000fffff] page 4k
[KERNEL] init_memory_mapping: [mem 0x37000000-0x373fffff]
[KERNEL] [mem 0x37000000-0x373fffff] page 2M
[KERNEL] init_memory_mapping: [mem 0x30000000-0x36ffffff]
[KERNEL] [mem 0x30000000-0x36ffffff] page 2M
[KERNEL] init_memory_mapping: [mem 0x00100000-0x2fffffff]
[KERNEL] [mem 0x00100000-0x003fffff] page 4k
[KERNEL] [mem 0x00400000-0x2fffffff] page 2M
[KERNEL] init_memory_mapping: [mem 0x37400000-0x377fdfff]
[KERNEL] [mem 0x37400000-0x377fdfff] page 4k
[KERNEL] BRK [0x004eb000, 0x004ebfff] PGTABLE
[KERNEL] early_memtest: # of tests: 1
[KERNEL] 0000010000 - 0000099000 pattern 0000000000000000
[KERNEL] 000009d000 - 000009d800 pattern 0000000000000000
[KERNEL] 00004f0000 - 00377fe000 pattern 0000000000000000
[KERNEL] RAMDISK: [mem 0x674ae000-0x67a1dfff]
[KERNEL] Allocated new RAMDISK: [mem 0x3728e000-0x377fd40d]
[KERNEL] Move RAMDISK from [mem 0x674ae000-0x67a1d40d] to [mem 0x3728e000-0x377fd40d]
[KERNEL] ACPI: RSDP 000f0450 00024 (v02 FOXCON)
[KERNEL] ACPI: XSDT 67a87070 0005C (v01 FOXCON FOXCONPC 03292011 AMI 00010013)
[KERNEL] ACPI: FACP 67a8b628 000F4 (v04 FOXCON FOXCONPC 03292011 AMI 00010013)
[KERNEL] ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20130117/tbfadt-599)
[KERNEL] ACPI: DSDT 67a87158 044CF (v02 FOXCON FOXCONPC 00000000 INTL 20051117)
[KERNEL] ACPI: FACS 67beef80 00040
[KERNEL] ACPI: APIC 67a8b720 00062 (v03 FOXCON FOXCONPC 03292011 AMI 00010013)
[KERNEL] ACPI: MCFG 67a8b788 0003C (v01 FOXCON FOXCONPC 03292011 MSFT 00010013)
[KERNEL] ACPI: HPET 67a8b7c8 00038 (v01 FOXCON FOXCONPC 03292011 AMI 00000004)
[KERNEL] ACPI: SSDT 67a8b800 003DE (v01 AMD POWERNOW 00000001 AMD 00000001)
[KERNEL] ACPI: SSDT 67a8bbe0 0168E (v02 AMD ALIB 00000001 MSFT 04000000)
[KERNEL] ACPI: ECDT 67a8d270 000C1 (v01 A M I FOXECDT 03292011 AMI. 00000004)
[KERNEL] ACPI: Local APIC address 0xfee00000
[KERNEL] 775MB HIGHMEM available.
[KERNEL] 887MB LOWMEM available.
[KERNEL] mapped low ram: 0 - 377fe000
[KERNEL] low ram: 0 - 377fe000
[KERNEL] BRK [0x004ec000, 0x004ecfff] PGTABLE
[KERNEL] Zone ranges:
[KERNEL] DMA [mem 0x00001000-0x00ffffff]
[KERNEL] Normal [mem 0x01000000-0x377fdfff]
[KERNEL] HighMem [mem 0x377fe000-0x67efffff]
[KERNEL] Movable zone start for each node
[KERNEL] Early memory node ranges
[KERNEL] node 0: [mem 0x00001000-0x0009dfff]
[KERNEL] node 0: [mem 0x00100000-0x67a3efff]
[KERNEL] node 0: [mem 0x67bd6000-0x67bd6fff]
[KERNEL] node 0: [mem 0x67c59000-0x67dc3fff]
[KERNEL] node 0: [mem 0x67ef6000-0x67efffff]
[KERNEL] On node 0 totalpages: 424786
[KERNEL] free_area_init_node: node 0, pgdat c0455be0, node_mem_map f658e020
[KERNEL] DMA zone: 32 pages used for memmap
[KERNEL] DMA zone: 0 pages reserved
[KERNEL] DMA zone: 3997 pages, LIFO batch:0
[KERNEL] Normal zone: 1744 pages used for memmap
[KERNEL] Normal zone: 223230 pages, LIFO batch:31
[KERNEL] HighMem zone: 1551 pages used for memmap
[KERNEL] HighMem zone: 197559 pages, LIFO batch:31
[KERNEL] Using APIC driver default
[KERNEL] ACPI: PM-Timer IO Port: 0x808
[KERNEL] ACPI: Local APIC address 0xfee00000
[KERNEL] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[KERNEL] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[KERNEL] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1 ignored.
[KERNEL] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[KERNEL] ACPI: IOAPIC (id[0x03] address[0xfec00000] gsi_base[0])
[KERNEL] IOAPIC[0]: apic_id 3, version 33, address 0xfec00000, GSI 0-23
[KERNEL] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[KERNEL] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[KERNEL] ACPI: IRQ0 used by override.
[KERNEL] ACPI: IRQ2 used by override.
[KERNEL] ACPI: IRQ9 used by override.
[KERNEL] Using ACPI (MADT) for SMP configuration information
[KERNEL] nr_irqs_gsi: 40
[KERNEL] e820: [mem 0x67f00000-0xfebfffff] available for PCI devices
[KERNEL] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[KERNEL] pcpu-alloc: [0] 0
[KERNEL] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 423010
[KERNEL] Kernel command line: root=/dev/ram0 memtest=1 quiet initrd=packages/initrd BOOT_IMAGE=packages/kernel
[KERNEL] PID hash table entries: 4096 (order: 2, 16384 bytes)
[KERNEL] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[KERNEL] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[KERNEL] __ex_table already sorted, skipping sort
[KERNEL] Initializing CPU#0
[KERNEL] Initializing HighMem for node 0 (000377fe:00067f00)
[KERNEL] Memory: 1675312k/1702912k available (2554k kernel code, 23832k reserved, 875k data, 324k init, 790236k highmem)
[KERNEL] virtual kernel memory layout:
[KERNEL] fixmap : 0xfffa2000 - 0xfffff000 ( 372 kB)
[KERNEL] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[KERNEL] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[KERNEL] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[KERNEL] .init : 0xc045a000 - 0xc04ab000 ( 324 kB)
[KERNEL] .data : 0xc037e83c - 0xc0459680 ( 875 kB)
[KERNEL] .text : 0xc0100000 - 0xc037e83c (2554 kB)
[KERNEL] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[KERNEL] NR_IRQS:2304 nr_irqs:256 16
[KERNEL] CPU 0 irqstacks, hard=f6008000 soft=f600a000
[KERNEL] Console: colour VGA+ 80x25
[KERNEL] console [tty0] enabled
[KERNEL] tsc: Fast TSC calibration using PIT
[KERNEL] tsc: Detected 1600.002 MHz processor
[KERNEL] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.00 BogoMIPS (lpj=1600002)
[KERNEL] pid_max: default: 32768 minimum: 301
[KERNEL] Mount-cache hash table entries: 512
[KERNEL] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[KERNEL] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
[KERNEL] tlb_flushall_shift: 5
[KERNEL] CPU: AMD E-350 Processor (fam: 14, model: 01, stepping: 00)
[KERNEL] ACPI: Core revision 20130117
[KERNEL] ACPI: All ACPI Tables successfully acquired
[KERNEL] Performance Events: AMD PMU driver.
[KERNEL] ... version: 0
[KERNEL] ... bit width: 48
[KERNEL] ... generic registers: 4
[KERNEL] ... value mask: 0000ffffffffffff
[KERNEL] ... max period: 00007fffffffffff
[KERNEL] ... fixed-purpose events: 0
[KERNEL] ... event mask: 000000000000000f
[KERNEL] Enabling APIC mode: Flat. Using 1 I/O APICs
[KERNEL] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[KERNEL] devtmpfs: initialized
[KERNEL] PM: Registering ACPI NVS region [mem 0x67a3f000-0x67a86fff] (294912 bytes)
[KERNEL] PM: Registering ACPI NVS region [mem 0x67a8e000-0x67a90fff] (12288 bytes)
[KERNEL] PM: Registering ACPI NVS region [mem 0x67be7000-0x67beefff] (32768 bytes)
[KERNEL] PM: Registering ACPI NVS region [mem 0x67c16000-0x67c58fff] (274432 bytes)
[KERNEL] NET: Registered protocol family 16
[KERNEL] ACPI: bus type PCI registered
[KERNEL] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[KERNEL] PCI: not using MMCONFIG
[KERNEL] PCI: Using configuration type 1 for base access
[KERNEL] PCI: Using configuration type 1 for extended access
[KERNEL] bio: create slab at 0
[KERNEL] ACPI: Added _OSI(Module Device)
[KERNEL] ACPI: Added _OSI(Processor Device)
[KERNEL] ACPI: Added _OSI(3.0 _SCP Extensions)
[KERNEL] ACPI: Added _OSI(Processor Aggregator Device)
[KERNEL] ACPI: EC: EC description table is found, configuring boot EC
[KERNEL] ACPI: Executed 2 blocks of module-level executable AML code
[KERNEL] ACPI: Interpreter enabled
[KERNEL] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130117/hwxface-568)
[KERNEL] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568)
[KERNEL] ACPI: (supports S0 S3 S5)
[KERNEL] ACPI: Using IOAPIC for interrupt routing
[KERNEL] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[KERNEL] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[KERNEL] PCI: Using MMCONFIG for extended config space
[KERNEL] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[KERNEL] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[KERNEL] PCI host bridge to bus 0000:00
[KERNEL] pci_bus 0000:00: root bus resource [bus 00-ff]
[KERNEL] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[KERNEL] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[KERNEL] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[KERNEL] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[KERNEL] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[KERNEL] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[KERNEL] pci_bus 0000:00: root bus resource [mem 0x80000000-0xffffffff]
[KERNEL] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
[KERNEL] pci 0000:00:01.0: [1002:9802] type 00 class 0x030000
[KERNEL] pci 0000:00:01.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
[KERNEL] pci 0000:00:01.0: reg 14: [io 0xf000-0xf0ff]
[KERNEL] pci 0000:00:01.0: reg 18: [mem 0xfeb00000-0xfeb3ffff]
[KERNEL] pci 0000:00:01.0: supports D1 D2
[KERNEL] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300
[KERNEL] pci 0000:00:01.1: reg 10: [mem 0xfeb44000-0xfeb47fff]
[KERNEL] pci 0000:00:01.1: supports D1 D2
[KERNEL] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[KERNEL] pci 0000:00:11.0: reg 10: [io 0xf190-0xf197]
[KERNEL] pci 0000:00:11.0: reg 14: [io 0xf180-0xf183]
[KERNEL] pci 0000:00:11.0: reg 18: [io 0xf170-0xf177]
[KERNEL] pci 0000:00:11.0: reg 1c: [io 0xf160-0xf163]
[KERNEL] pci 0000:00:11.0: reg 20: [io 0xf150-0xf15f]
[KERNEL] pci 0000:00:11.0: reg 24: [mem 0xfeb4f000-0xfeb4f3ff]
[KERNEL] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[KERNEL] pci 0000:00:12.0: reg 10: [mem 0xfeb4e000-0xfeb4efff]
[KERNEL] pci 0000:00:12.0: System wakeup disabled by ACPI
[KERNEL] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[KERNEL] pci 0000:00:12.2: reg 10: [mem 0xfeb4d000-0xfeb4d0ff]
[KERNEL] pci 0000:00:12.2: supports D1 D2
[KERNEL] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[KERNEL] pci 0000:00:12.2: System wakeup disabled by ACPI
[KERNEL] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[KERNEL] pci 0000:00:13.0: reg 10: [mem 0xfeb4c000-0xfeb4cfff]
[KERNEL] pci 0000:00:13.0: System wakeup disabled by ACPI
[KERNEL] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[KERNEL] pci 0000:00:13.2: reg 10: [mem 0xfeb4b000-0xfeb4b0ff]
[KERNEL] pci 0000:00:13.2: supports D1 D2
[KERNEL] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[KERNEL] pci 0000:00:13.2: System wakeup disabled by ACPI
[KERNEL] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[KERNEL] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[KERNEL] pci 0000:00:14.1: reg 10: [io 0xf140-0xf147]
[KERNEL] pci 0000:00:14.1: reg 14: [io 0xf130-0xf133]
[KERNEL] pci 0000:00:14.1: reg 18: [io 0xf120-0xf127]
[KERNEL] pci 0000:00:14.1: reg 1c: [io 0xf110-0xf113]
[KERNEL] pci 0000:00:14.1: reg 20: [io 0xf100-0xf10f]
[KERNEL] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[KERNEL] pci 0000:00:14.2: reg 10: [mem 0xfeb40000-0xfeb43fff 64bit]
[KERNEL] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[KERNEL] pci 0000:00:14.2: System wakeup disabled by ACPI
[KERNEL] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[KERNEL] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[KERNEL] pci 0000:00:14.4: System wakeup disabled by ACPI
[KERNEL] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[KERNEL] pci 0000:00:14.5: reg 10: [mem 0xfeb4a000-0xfeb4afff]
[KERNEL] pci 0000:00:14.5: System wakeup disabled by ACPI
[KERNEL] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[KERNEL] pci 0000:00:15.0: supports D1 D2
[KERNEL] pci 0000:00:15.0: System wakeup disabled by ACPI
[KERNEL] pci 0000:00:15.2: [1002:43a2] type 01 class 0x060400
[KERNEL] pci 0000:00:15.2: supports D1 D2
[KERNEL] pci 0000:00:15.2: System wakeup disabled by ACPI
[KERNEL] pci 0000:00:15.3: [1002:43a3] type 01 class 0x060400
[KERNEL] pci 0000:00:15.3: supports D1 D2
[KERNEL] pci 0000:00:15.3: System wakeup disabled by ACPI
[KERNEL] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[KERNEL] pci 0000:00:16.0: reg 10: [mem 0xfeb49000-0xfeb49fff]
[KERNEL] pci 0000:00:16.0: System wakeup disabled by ACPI
[KERNEL] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[KERNEL] pci 0000:00:16.2: reg 10: [mem 0xfeb48000-0xfeb480ff]
[KERNEL] pci 0000:00:16.2: supports D1 D2
[KERNEL] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[KERNEL] pci 0000:00:16.2: System wakeup disabled by ACPI
[KERNEL] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
[KERNEL] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
[KERNEL] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
[KERNEL] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
[KERNEL] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
[KERNEL] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
[KERNEL] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
[KERNEL] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
[KERNEL] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode)
[KERNEL] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
[KERNEL] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
[KERNEL] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
[KERNEL] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[KERNEL] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[KERNEL] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[KERNEL] pci 0000:00:14.4: bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
[KERNEL] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[KERNEL] pci 0000:02:00.0: reg 10: [io 0xe000-0xe0ff]
[KERNEL] pci 0000:02:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
[KERNEL] pci 0000:02:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
[KERNEL] pci 0000:02:00.0: supports D1 D2
[KERNEL] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[KERNEL] pci 0000:00:15.0: PCI bridge to [bus 02]
[KERNEL] pci 0000:00:15.0: bridge window [io 0xe000-0xefff]
[KERNEL] pci 0000:00:15.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[KERNEL] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
[KERNEL] pci 0000:03:00.0: reg 10: [mem 0xfea00000-0xfea07fff 64bit]
[KERNEL] pci 0000:03:00.0: PME# supported from D3hot D3cold
[KERNEL] pci 0000:00:15.2: PCI bridge to [bus 03]
[KERNEL] pci 0000:00:15.2: bridge window [mem 0xfea00000-0xfeafffff]
[KERNEL] pci 0000:04:00.0: [8086:0083] type 00 class 0x028000
[KERNEL] pci 0000:04:00.0: reg 10: [mem 0xfe900000-0xfe901fff 64bit]
[KERNEL] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[KERNEL] pci 0000:00:15.3: PCI bridge to [bus 04]
[KERNEL] pci 0000:00:15.3: bridge window [mem 0xfe900000-0xfe9fffff]
[KERNEL] pci_bus 0000:00: on NUMA node 0
[KERNEL] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[KERNEL] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[KERNEL] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[KERNEL] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[KERNEL] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[KERNEL] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
[KERNEL] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
[KERNEL] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
[KERNEL] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
[KERNEL] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
[KERNEL] acpi root: \_SB_.PCI0 notify handler is installed
[KERNEL] Found 1 acpi root devices
[KERNEL] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[KERNEL] ACPI: bus type USB registered
[KERNEL] usbcore: registered new interface driver usbfs
[KERNEL] usbcore: registered new interface driver hub
[KERNEL] usbcore: registered new device driver usb
[KERNEL] wmi: Mapper loaded
[KERNEL] PCI: Using ACPI for IRQ routing
[KERNEL] PCI: pci_cache_line_size set to 64 bytes
[KERNEL] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[KERNEL] e820: reserve RAM buffer [mem 0x67a3f000-0x67ffffff]
[KERNEL] e820: reserve RAM buffer [mem 0x67bd7000-0x67ffffff]
[KERNEL] e820: reserve RAM buffer [mem 0x67dc4000-0x67ffffff]
[KERNEL] e820: reserve RAM buffer [mem 0x67f00000-0x67ffffff]
[KERNEL] Switching to clocksource refined-jiffies
[KERNEL] pnp: PnP ACPI init
[KERNEL] ACPI: bus type PNP registered
[KERNEL] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[KERNEL] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[KERNEL] system 00:01: [mem 0x68000000-0x7fffffff] has been reserved
[KERNEL] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[KERNEL] system 00:02: [io 0x040b] has been reserved
[KERNEL] system 00:02: [io 0x04d6] has been reserved
[KERNEL] system 00:02: [io 0x0c00-0x0c01] has been reserved
[KERNEL] system 00:02: [io 0x0c14] has been reserved
[KERNEL] system 00:02: [io 0x0c50-0x0c51] has been reserved
[KERNEL] system 00:02: [io 0x0c52] has been reserved
[KERNEL] system 00:02: [io 0x0c6c] has been reserved
[KERNEL] system 00:02: [io 0x0c6f] has been reserved
[KERNEL] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
[KERNEL] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
[KERNEL] system 00:02: [io 0x0cd4-0x0cd5] has been reserved
[KERNEL] system 00:02: [io 0x0cd6-0x0cd7] has been reserved
[KERNEL] system 00:02: [io 0x0cd8-0x0cdf] has been reserved
[KERNEL] system 00:02: [io 0x0800-0x089f] has been reserved
[KERNEL] system 00:02: [io 0x0b20-0x0b3f] has been reserved
[KERNEL] system 00:02: [io 0x0900-0x090f] has been reserved
[KERNEL] system 00:02: [io 0x0910-0x091f] has been reserved
[KERNEL] system 00:02: [io 0xfe00-0xfefe] has been reserved
[KERNEL] system 00:02: [io 0x0a10-0x0a13] has been reserved
[KERNEL] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
[KERNEL] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
[KERNEL] system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved
[KERNEL] system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved
[KERNEL] system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved
[KERNEL] system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved
[KERNEL] system 00:02: [mem 0xffe00000-0xffffffff] has been reserved
[KERNEL] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[KERNEL] pnp 00:03: [dma 4]
[KERNEL] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[KERNEL] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[KERNEL] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[KERNEL] system 00:06: [io 0x04d0-0x04d1] has been reserved
[KERNEL] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[KERNEL] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[KERNEL] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[KERNEL] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
[KERNEL] pnp: PnP ACPI: found 10 devices
[KERNEL] ACPI: bus type PNP unregistered
[KERNEL] Switching to clocksource acpi_pm
[KERNEL] pci 0000:00:14.4: PCI bridge to [bus 01]
[KERNEL] pci 0000:00:15.0: PCI bridge to [bus 02]
[KERNEL] pci 0000:00:15.0: bridge window [io 0xe000-0xefff]
[KERNEL] pci 0000:00:15.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[KERNEL] pci 0000:00:15.2: PCI bridge to [bus 03]
[KERNEL] pci 0000:00:15.2: bridge window [mem 0xfea00000-0xfeafffff]
[KERNEL] pci 0000:00:15.3: PCI bridge to [bus 04]
[KERNEL] pci 0000:00:15.3: bridge window [mem 0xfe900000-0xfe9fffff]
[KERNEL] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[KERNEL] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[KERNEL] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[KERNEL] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[KERNEL] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[KERNEL] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[KERNEL] pci_bus 0000:00: resource 10 [mem 0x80000000-0xffffffff]
[KERNEL] pci_bus 0000:01: resource 4 [io 0x0000-0x03af]
[KERNEL] pci_bus 0000:01: resource 5 [io 0x03e0-0x0cf7]
[KERNEL] pci_bus 0000:01: resource 6 [io 0x03b0-0x03df]
[KERNEL] pci_bus 0000:01: resource 7 [io 0x0d00-0xffff]
[KERNEL] pci_bus 0000:01: resource 8 [mem 0x000a0000-0x000bffff]
[KERNEL] pci_bus 0000:01: resource 9 [mem 0x000c0000-0x000dffff]
[KERNEL] pci_bus 0000:01: resource 10 [mem 0x80000000-0xffffffff]
[KERNEL] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[KERNEL] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[KERNEL] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[KERNEL] pci_bus 0000:04: resource 1 [mem 0xfe900000-0xfe9fffff]
[KERNEL] NET: Registered protocol family 2
[KERNEL] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[KERNEL] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[KERNEL] TCP: Hash tables configured (established 8192 bind 8192)
[KERNEL] TCP: reno registered
[KERNEL] UDP hash table entries: 512 (order: 1, 8192 bytes)
[KERNEL] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[KERNEL] NET: Registered protocol family 1
[KERNEL] pci 0000:00:01.0: Boot video device
[KERNEL] PCI: CLS 64 bytes, default 64
[KERNEL] Freeing initrd memory: 5568k freed
[KERNEL] LVT offset 0 assigned for vector 0x400
[KERNEL] perf: AMD IBS detected (0x000000ff)
[KERNEL] bounce pool size: 64 pages
[KERNEL] ROMFS MTD (C) 2007 Red Hat, Inc.
[KERNEL] msgmni has been set to 1739
[KERNEL] io scheduler noop registered
[KERNEL] io scheduler cfq registered (default)
[KERNEL] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[KERNEL] ACPI: Power Button [PWRB]
[KERNEL] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[KERNEL] ACPI: Sleep Button [SLPB]
[KERNEL] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[KERNEL] ACPI: Power Button [PWRF]
[KERNEL] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input3
[KERNEL] ACPI: Sleep Button [SLPF]
[KERNEL] ACPI Error: Could not enable SleepButton event (20130117/evxfevnt-199)
[KERNEL] ACPI Warning: Could not enable fixed event 0x3 (20130117/evxface-487)
[KERNEL] button: probe of LNXSLPBN:00 failed with error -22
[KERNEL] ACPI: acpi_idle registered with cpuidle
[KERNEL] brd: module loaded
[KERNEL] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[KERNEL] ehci-pci: EHCI PCI platform driver
[KERNEL] ehci-pci 0000:00:12.2: EHCI Host Controller
[KERNEL] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[KERNEL] QUIRK: Enable AMD PLL fix
[KERNEL] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[KERNEL] ehci-pci 0000:00:12.2: debug port 1
[KERNEL] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4d000
[KERNEL] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[KERNEL] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[KERNEL] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[KERNEL] usb usb1: Product: EHCI Host Controller
[KERNEL] usb usb1: Manufacturer: Linux 3.9.4 ehci_hcd
[KERNEL] usb usb1: SerialNumber: 0000:00:12.2
[KERNEL] hub 1-0:1.0: USB hub found
[KERNEL] hub 1-0:1.0: 5 ports detected
[KERNEL] ehci-pci 0000:00:13.2: EHCI Host Controller
[KERNEL] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[KERNEL] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[KERNEL] ehci-pci 0000:00:13.2: debug port 1
[KERNEL] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb4b000
[KERNEL] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[KERNEL] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[KERNEL] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[KERNEL] usb usb2: Product: EHCI Host Controller
[KERNEL] usb usb2: Manufacturer: Linux 3.9.4 ehci_hcd
[KERNEL] usb usb2: SerialNumber: 0000:00:13.2
[KERNEL] hub 2-0:1.0: USB hub found
[KERNEL] hub 2-0:1.0: 5 ports detected
[KERNEL] ehci-pci 0000:00:16.2: EHCI Host Controller
[KERNEL] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
[KERNEL] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[KERNEL] ehci-pci 0000:00:16.2: debug port 1
[KERNEL] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb48000
[KERNEL] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[KERNEL] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[KERNEL] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[KERNEL] usb usb3: Product: EHCI Host Controller
[KERNEL] usb usb3: Manufacturer: Linux 3.9.4 ehci_hcd
[KERNEL] usb usb3: SerialNumber: 0000:00:16.2
[KERNEL] hub 3-0:1.0: USB hub found
[KERNEL] hub 3-0:1.0: 4 ports detected
[KERNEL] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[KERNEL] ohci_hcd 0000:00:12.0: OHCI Host Controller
[KERNEL] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
[KERNEL] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb4e000
[KERNEL] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[KERNEL] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[KERNEL] usb usb4: Product: OHCI Host Controller
[KERNEL] usb usb4: Manufacturer: Linux 3.9.4 ohci_hcd
[KERNEL] usb usb4: SerialNumber: 0000:00:12.0
[KERNEL] hub 4-0:1.0: USB hub found
[KERNEL] hub 4-0:1.0: 5 ports detected
[KERNEL] ohci_hcd 0000:00:13.0: OHCI Host Controller
[KERNEL] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[KERNEL] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb4c000
[KERNEL] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[KERNEL] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[KERNEL] usb usb5: Product: OHCI Host Controller
[KERNEL] usb usb5: Manufacturer: Linux 3.9.4 ohci_hcd
[KERNEL] usb usb5: SerialNumber: 0000:00:13.0
[KERNEL] hub 5-0:1.0: USB hub found
[KERNEL] hub 5-0:1.0: 5 ports detected
[KERNEL] ohci_hcd 0000:00:14.5: OHCI Host Controller
[KERNEL] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
[KERNEL] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb4a000
[KERNEL] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[KERNEL] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[KERNEL] usb usb6: Product: OHCI Host Controller
[KERNEL] usb usb6: Manufacturer: Linux 3.9.4 ohci_hcd
[KERNEL] usb usb6: SerialNumber: 0000:00:14.5
[KERNEL] hub 6-0:1.0: USB hub found
[KERNEL] hub 6-0:1.0: 2 ports detected
[KERNEL] ohci_hcd 0000:00:16.0: OHCI Host Controller
[KERNEL] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
[KERNEL] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfeb49000
[KERNEL] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[KERNEL] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[KERNEL] usb usb7: Product: OHCI Host Controller
[KERNEL] usb usb7: Manufacturer: Linux 3.9.4 ohci_hcd
[KERNEL] usb usb7: SerialNumber: 0000:00:16.0
[KERNEL] hub 7-0:1.0: USB hub found
[KERNEL] hub 7-0:1.0: 4 ports detected
[KERNEL] uhci_hcd: USB Universal Host Controller Interface driver
[KERNEL] xhci_hcd 0000:03:00.0: xHCI Host Controller
[KERNEL] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 8
[KERNEL] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[KERNEL] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[KERNEL] usb usb8: Product: xHCI Host Controller
[KERNEL] usb usb8: Manufacturer: Linux 3.9.4 xhci_hcd
[KERNEL] usb usb8: SerialNumber: 0000:03:00.0
[KERNEL] xHCI xhci_add_endpoint called for root hub
[KERNEL] xHCI xhci_check_bandwidth called for root hub
[KERNEL] hub 8-0:1.0: USB hub found
[KERNEL] hub 8-0:1.0: 2 ports detected
[KERNEL] xhci_hcd 0000:03:00.0: xHCI Host Controller
[KERNEL] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 9
[KERNEL] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
[KERNEL] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[KERNEL] usb usb9: Product: xHCI Host Controller
[KERNEL] usb usb9: Manufacturer: Linux 3.9.4 xhci_hcd
[KERNEL] usb usb9: SerialNumber: 0000:03:00.0
[KERNEL] xHCI xhci_add_endpoint called for root hub
[KERNEL] xHCI xhci_check_bandwidth called for root hub
[KERNEL] hub 9-0:1.0: USB hub found
[KERNEL] hub 9-0:1.0: 2 ports detected
[KERNEL] i8042: PNP: No PS/2 controller found. Probing ports directly.
[KERNEL] i8042: Detected active multiplexing controller, rev 1.1
[KERNEL] serio: i8042 KBD port at 0x60,0x64 irq 1
[KERNEL] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[KERNEL] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[KERNEL] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[KERNEL] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[KERNEL] mousedev: PS/2 mouse device common for all mice
[KERNEL] input: PC Speaker as /devices/platform/pcspkr/input/input4
[KERNEL] cpuidle: using governor ladder
[KERNEL] hidraw: raw HID events driver (C) Jiri Kosina
[KERNEL] hv_vmbus: registering driver hid_hyperv
[KERNEL] usbcore: registered new interface driver usbhid
[KERNEL] usbhid: USB HID core driver
[KERNEL] zram: Created 1 device(s) ...
[KERNEL] TCP: cubic registered
[KERNEL] NET: Registered protocol family 17
[KERNEL] Using IPI Shortcut mode
[KERNEL] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[KERNEL] RAMDISK: lzo image found at block 0
[KERNEL] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[KERNEL] atkbd serio0: Use 'setkeycodes 7c ' to make it known.
[KERNEL] VFS: Mounted root (romfs filesystem) readonly on device 1:0.
[KERNEL] devtmpfs: mounted
[KERNEL] Freeing unused kernel memory: 324k freed
[KERNEL] Write protecting the kernel text: 2556k
[KERNEL] Write protecting the kernel read-only data: 696k
[KERNEL] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[KERNEL] atkbd serio0: Use 'setkeycodes 7c ' to make it known.
[KERNEL] usb 4-3: new low-speed USB device number 2 using ohci_hcd
[KERNEL] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[KERNEL] atkbd serio0: Use 'setkeycodes 7c ' to make it known.
[KERNEL] usb 4-3: New USB device found, idVendor=046d, idProduct=c31c
[KERNEL] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[KERNEL] usb 4-3: Product: USB Keyboard
[KERNEL] usb 4-3: Manufacturer: Logitech
[pfac] Ok, PID 434.
[initrd] WTware shell v.5.1.36
[KERNEL] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.0/input/input6
[KERNEL] hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:12.0-3/input0
[KERNEL] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.1/input/input7
[KERNEL] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:12.0-3/input1
[initrd] PCI: 1022:1510 Advanced Micro Devices, Inc. [AMD] Family 14h Processor Root Complex.
[initrd] PCI: 1002:9802 Advanced Micro Devices, Inc. [AMD/ATI] Wrestler [Radeon HD 6310].
[initrd] PCI: C 03 1002:1314 Display controller Advanced Micro Devices, Inc. [AMD/ATI] Wrestler HDMI Audio [Radeon HD 6250/6310].
[initrd] PCI: C 06:01 1002:4391 Bridge ISA bridge Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode].
[initrd] PCI: C 03:10 1002:4397 Display controller Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller.
[initrd] PCI: C 03:20 1002:4396 Display controller Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller.
[initrd] PCI: C 05 1002:4385 Memory controller Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller.
[initrd] PCI: C 01:8a 1002:439c Mass storage controller Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 IDE Controller.
[initrd] PCI: C 03 1002:4383 Display controller Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA).
[initrd] PCI: C 01 1002:439d Mass storage controller Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller.
[initrd] PCI: C 04:01 1002:4384 Multimedia controller Multimedia audio controller Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge.
[initrd] PCI: C 03:10 1002:4399 Display controller Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller.
[initrd] PCI: C 04 1002:43a0 Multimedia controller Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0).
[initrd] PCI: C 04 1002:43a2 Multimedia controller Advanced Micro Devices, Inc. [AMD/ATI] SB900 PCI to PCI bridge (PCIE port 2).
[initrd] PCI: C 04 1002:43a3 Multimedia controller Advanced Micro Devices, Inc. [AMD/ATI] SB900 PCI to PCI bridge (PCIE port 3).
[initrd] PCI: 1022:1700 Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 0.
[initrd] PCI: 1022:1701 Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 1.
[initrd] PCI: 1022:1702 Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 2.
[initrd] PCI: 1022:1703 Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 3.
[initrd] PCI: 1022:1704 Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 4.
[initrd] PCI: 1022:1718 Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 6.
[initrd] PCI: 1022:1716 Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 5.
[initrd] PCI: 1022:1719 Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 7.
[initrd] PCI: 10ec:8168 Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller.
[initrd] PCI: C 03:30 1b21:1042 Display controller ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller.
[initrd] PCI: C 80 8086:0083 Intel Corporation Centrino Wireless-N 1000 [Condor Peak].
[initrd] USB: 046d:c31c Logitech, Inc. Keyboard K120 for Business.
[initrd] Loading ethernet drivers.
[initrd] modprobe r8169.
[KERNEL] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[KERNEL] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xf8084000, d0:27:88:d1:0b:01, XID 0c900880 IRQ 16
[KERNEL] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[initrd] NIC module r8169.ko loaded.
[KERNEL] tsc: Refined TSC clocksource calibration: 1599.999 MHz
[KERNEL] Switching to clocksource tsc
[KERNEL] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[KERNEL] atkbd serio0: Use 'setkeycodes 7c ' to make it known.
[KERNEL] r8169 0000:02:00.0 eth0: link down
[KERNEL] r8169 0000:02:00.0 eth0: link down
[KERNEL] usb 4-4: new low-speed USB device number 3 using ohci_hcd
[KERNEL] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[KERNEL] atkbd serio0: Use 'setkeycodes 7c ' to make it known.
[KERNEL] usb 4-4: New USB device found, idVendor=0458, idProduct=003a
[KERNEL] usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[KERNEL] usb 4-4: Product: Optical Mouse
[KERNEL] usb 4-4: Manufacturer: Genius
[KERNEL] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.0/input/input8
[KERNEL] hid-generic 0003:0458:003A.0003: input,hidraw2: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:12.0-4/input0
[KERNEL] usb 2-2: new high-speed USB device number 2 using ehci-pci
[KERNEL] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[KERNEL] atkbd serio0: Use 'setkeycodes 7c ' to make it known.
[KERNEL] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[KERNEL] atkbd serio0: Use 'setkeycodes 7c ' to make it known.
[KERNEL] usb 2-2: New USB device found, idVendor=0bda, idProduct=0138
[KERNEL] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[KERNEL] usb 2-2: Product: USB2.0-CRW
[KERNEL] usb 2-2: Manufacturer: Generic
[KERNEL] usb 2-2: SerialNumber: 20090516388200000
[KERNEL] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[KERNEL] atkbd serio0: Use 'setkeycodes 7c ' to make it known.
[KERNEL] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[KERNEL] atkbd serio0: Use 'setkeycodes 7c ' to make it known.
[KERNEL] r8169 0000:02:00.0 eth0: link up
[initrd] eth0: 10ec:8168. Apply WOL configuration.
[initrd] dhcp: 361 bytes from 192.168.20.4.
[initrd] 00000000:000001550000000000110000c0a81404ffffffff004300440155000002010600
[initrd] 00000020:67458b6b0000000000000000c0a816b2c0a8140400000000d02788d10b010000
[initrd] 00000040:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 00000060:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 00000080:00000000000000007774776172652e7078650000000000000000000000000000
[initrd] 000000a0:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 000000c0:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 000000e0:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 00000100:0000000000000000638253633501020104fffffc003a04000151803b0400024e
[initrd] 00000120:a033040002a3003604c0a814040304c0a814010608c0a81404c0a8140e0f0d67
[initrd] 00000140:6d2e6c617572612e67727000420d3139322e3136382e32302e3400430b777477
[initrd] 00000160:6172652e70786500ff
[initrd] dhcp: 361 bytes from 192.168.20.4.
[initrd] 00000000:000001550000000000110000c0a81404ffffffff004300440155000002010600
[initrd] 00000020:67458b6b0000000000000000c0a816b2c0a8140400000000d02788d10b010000
[initrd] 00000040:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 00000060:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 00000080:00000000000000007774776172652e7078650000000000000000000000000000
[initrd] 000000a0:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 000000c0:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 000000e0:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 00000100:0000000000000000638253633501053a04000151803b0400024ea033040002a3
[initrd] 00000120:003604c0a814040104fffffc000304c0a814010608c0a81404c0a8140e0f0d67
[initrd] 00000140:6d2e6c617572612e67727000420d3139322e3136382e32302e3400430b777477
[initrd] 00000160:6172652e70786500ff
[initrd] dhcp: server address 192.168.20.4.
[initrd] dhcp: 192.168.22.178/255.255.252.0.
[initrd] dhcp: default gateway 192.168.20.1.
[initrd] dhcp: DNS 192.168.20.4.
[initrd] dhcp: DNS 192.168.20.14.
[initrd] dhcp: domain gm.laura.grp.
[initrd] dhcp: TFTP 192.168.20.4.
[initrd] dhcp: boot file (067) wtware.pxe.
[initrd] TFTP binary "", configs prefix "", using "/" slash.
Send broadcast WTCU discover.
[initrd] TFTP: download file Everyone/list.wtc from 192.168.20.4.
[initrd] It isn't WTware5 TFTP server...
[initrd] tftp error code 1: File not found.
[initrd] TFTP: download file Terminals/D0.27.88.D1.0B.01/config.wtc from 192.168.20.4.
/--- FILE "/tmp/config.wtc" -----------------------
| server = rdp:oz-01-lo-trm-03.gm.laura.grp
| numlock = on
| graphic = bdef
| clienthostname = terminal-ascod
| turnoffmenu = on
| autoshutdown = 15
| managed = on
| connect_timeout = 15
| httpd = off
| mouse_accel_mult = 1
| video = ati(U)
| resolution = 1920x1080
| bpp = 16
| refresh = 60
| disk=usb
| sound = on
| sound_level = 100
| sound_control = sw
\----------------------------------------------------
[initrd] TFTP: download file Everyone/all.wtc from 192.168.20.4.
[initrd] tftp error code 1: File not found.
[initrd] TFTP: download file Everyone/wtware.lic from 192.168.20.4.
/--- FILE "/etc/config.compiled" -----------------------
| [BOM]
| server=rdp:oz-01-lo-trm-03.gm.laura.grp
| numlock=on
| graphic=bdef
| clienthostname=terminal-ascod
| turnoffmenu=on
| autoshutdown=15
| managed=on
| connect_timeout=15
| httpd=off
| mouse_accel_mult=1
| video=ati(U)
| resolution=1920x1080
| bpp=16
| refresh=60
| disk=usb
| sound=on
| sound_level=100
| sound_control=sw
| connection
\----------------------------------------------------
[initrd] Hostname: "terminal-ascod".
RSHd listener active.
Nobody can control terminal by http.
[initrd] TFTP: download and unpack file packages/lib6 from 192.168.20.4.
[initrd] TFTP: download and unpack file packages/uati from 192.168.20.4.
[initrd] TFTP: download and unpack file packages/f from 192.168.20.4.
[initrd] TFTP: download and unpack file packages/u from 192.168.20.4.
[initrd] /lib/i386-linux-gnu/libssl.so.0.9.8 already exist. Do not overwrite.
[initrd] TFTP: download and unpack file packages/graphic from 192.168.20.4.
[gm] WTware session manager v.5.1.36.
[gm] [t1] Add mouse event7: Genius Optical Mouse.
[gm] Add keyboard event6: Logitech USB Keyboard.
[gm] Add keyboard event5: Logitech USB Keyboard.
[gm] Add keyboard event4: AT Translated Set 2 keyboard.
[gm] Ignore event3: PC Speaker.
[gm] Add keyboard event2: Power Button.
[gm] Add keyboard event1: Sleep Button.
[gm] Add keyboard event0: Power Button.
[gm] Display mode: 1920x1080, 16 bit, 60 Hz, modeline "", DDC enabled, connector 0.
[gm] Mode 1920x1080@60Hz NOT found in table. Generate timings.
/--- FILE "/etc/xorg.conf" -----------------------
| Section "InputDevice"
| Identifier "Mouse0"
| Driver "evdev"
| Option "Device" "/dev/input/event7"
| Option "SendCoreEvents" "on"
| Option "ConstantDeceleration" "5.000000"
| EndSection
| Section "InputDevice"
| Identifier "Keyboard0"
| Driver "evdev"
| Option "Device" "/dev/input/event6"
| Option "SendCoreEvents" "on"
| Option "XkbLayout" "us"
| Option "XkbRules" "evdev"
| EndSection
| Section "InputDevice"
| Identifier "Keyboard1"
| Driver "evdev"
| Option "Device" "/dev/input/event5"
| Option "SendCoreEvents" "on"
| Option "XkbLayout" "us"
| Option "XkbRules" "evdev"
| EndSection
| Section "InputDevice"
| Identifier "Keyboard2"
| Driver "evdev"
| Option "Device" "/dev/input/event4"
| Option "SendCoreEvents" "on"
| Option "XkbLayout" "us"
| Option "XkbRules" "evdev"
| EndSection
| Section "InputDevice"
| Identifier "Keyboard3"
| Driver "evdev"
| Option "Device" "/dev/input/event2"
| Option "SendCoreEvents" "on"
| Option "XkbLayout" "us"
| Option "XkbRules" "evdev"
| EndSection
| Section "InputDevice"
| Identifier "Keyboard4"
| Driver "evdev"
| Option "Device" "/dev/input/event1"
| Option "SendCoreEvents" "on"
| Option "XkbLayout" "us"
| Option "XkbRules" "evdev"
| EndSection
| Section "InputDevice"
| Identifier "Keyboard5"
| Driver "evdev"
| Option "Device" "/dev/input/event0"
| Option "SendCoreEvents" "on"
| Option "XkbLayout" "us"
| Option "XkbRules" "evdev"
| EndSection
| Section "ServerFlags"
| Option "DontVTSwitch" "on"
| Option "DontZoom" "on"
| Option "DontZap" "on"
| Option "NoPM" "on"
| Option "AIGLX" "off"
| Option "AutoAddDevices" "off"
| EndSection
| Section "Device"
| Identifier "Video0"
| Driver "ati"
| EndSection
| Section "Monitor"
| Identifier "Monitor0"
| HorizSync 20-200
| VertRefresh 50-65
| ModeLine "1920x1080" 172.80 1920 2040 2248 2576 1080 1081 1084 1118
| Option "PreferredMode" "1920x1080"
| EndSection
| Section "Screen"
| Identifier "Screen0"
| Device "Video0"
| Monitor "Monitor0"
| DefaultDepth 16
| SubSection "Display"
| Depth 16
| Modes "1920x1080"
| Virtual 1920 1080
| EndSubSection
| EndSection
| Section "ServerLayout"
| Identifier "Layout"
| Screen "Screen0"
| InputDevice "Mouse0"
| InputDevice "Keyboard0"
| InputDevice "Keyboard1"
| InputDevice "Keyboard2"
| InputDevice "Keyboard3"
| InputDevice "Keyboard4"
| InputDevice "Keyboard5"
| EndSection
\----------------------------------------------------
[gm] modprobe radeon.
[KERNEL] Linux agpgart interface v0.103
[KERNEL] [drm] Initialized drm 1.1.0 20060810
[KERNEL] [drm] radeon kernel modesetting enabled.
[KERNEL] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x105B:0x0E29).
[KERNEL] [drm] register mmio base: 0xFEB00000
[KERNEL] [drm] register mmio size: 262144
[KERNEL] ATOM BIOS: AMD
[KERNEL] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
[KERNEL] radeon 0000:00:01.0: GTT: 512M 0x0000000018000000 - 0x0000000037FFFFFF
[KERNEL] [drm] Detected VRAM RAM=384M, BAR=256M
[KERNEL] [drm] RAM width 32bits DDR
[KERNEL] [TTM] Zone kernel: Available graphics memory: 445484 kiB
[KERNEL] [TTM] Zone highmem: Available graphics memory: 840602 kiB
[KERNEL] [TTM] Initializing pool allocator
[KERNEL] [drm] radeon: 384M of VRAM memory ready
[KERNEL] [drm] radeon: 512M of GTT memory ready.
[KERNEL] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[KERNEL] [drm] Driver supports precise vblank timestamp query.
[KERNEL] [drm] radeon: irq initialized.
[KERNEL] [drm] GART: num cpu pages 131072, num gpu pages 131072
[KERNEL] [drm] Loading PALM Microcode
[KERNEL] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[KERNEL] radeon 0000:00:01.0: WB enabled
[KERNEL] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0xff9aac00
[KERNEL] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0xff9aac0c
[KERNEL] [drm] ring test on 0 succeeded in 1 usecs
[KERNEL] [drm] ring test on 3 succeeded in 1 usecs
[KERNEL] [drm] ib test on ring 0 succeeded in 0 usecs
[KERNEL] [drm] ib test on ring 3 succeeded in 0 usecs
[KERNEL] [drm] Radeon Display Connectors
[KERNEL] [drm] Connector 0:
[KERNEL] [drm] DVI-I-1
[KERNEL] [drm] HPD1
[KERNEL] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[KERNEL] [drm] Encoders:
[KERNEL] [drm] DFP1: INTERNAL_UNIPHY
[KERNEL] [drm] Connector 1:
[KERNEL] [drm] HDMI-A-1
[KERNEL] [drm] HPD2
[KERNEL] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[KERNEL] [drm] Encoders:
[KERNEL] [drm] DFP2: INTERNAL_UNIPHY
[KERNEL] [drm] Connector 2:
[KERNEL] [drm] VGA-1
[KERNEL] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[KERNEL] [drm] Encoders:
[KERNEL] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[KERNEL] [drm] Internal thermal controller without fan control
[KERNEL] [drm] radeon: power management initialized
[KERNEL] [drm] fb mappable at 0xC0142000
[KERNEL] [drm] vram apper at 0xC0000000
[KERNEL] [drm] size 8294400
[KERNEL] [drm] fb depth is 24
[KERNEL] [drm] pitch is 7680
[KERNEL] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[KERNEL] radeon 0000:00:01.0: registered panic notifier
[KERNEL] [drm] Initialized radeon 2.30.0 20080528 for 0000:00:01.0 on minor 0
[pfac] Got command line /usr/bin/Xorg -nolisten inet6 -s 0 -quiet -logfile /tmp/Xorg.0.log.
[pfac] Ok, PID 507.
[X] [ 9.244]
[X] X.Org X Server 1.13.3
[X] Release Date: 2013-03-07
[X] [ 9.244] X Protocol Version 11, Revision 0
[X] [ 9.245] Build Operating System: Linux 3.2.0-37-generic i686 Ubuntu
[X] [ 9.245] Current Operating System: Linux (none) 3.9.4 #1 PREEMPT Sun May 26 16:23:49 MSK 2013 i686
[X] [ 9.245] Kernel command line: root=/dev/ram0 memtest=1 quiet initrd=packages/initrd BOOT_IMAGE=packages/kernel
[X] [ 9.245] Build Date: 17 April 2013 10:42:56PM
[X] [ 9.245] xorg-server 2:1.13.3-0ubuntu6 (For technical support please see http://www.ubuntu.com/support)
[X] [ 9.245] Current version of pixman: 0.28.2
[X] [ 9.245] Before reporting problems, check http://wiki.x.org
[X] to make sure that you have the latest version.
[X] [ 9.245] Markers: (--) probed, (**) from config file, (==) default setting,
[X] (++) from command line, (!!) notice, (II) informational,
[X] (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[X] [ 9.245] (++) Log file: "/tmp/Xorg.0.log", Time: Wed May 29 10:37:47 2013
[X] [ 9.246] (==) Using config file: "/etc/xorg.conf"
[X] [ 9.246] (==) ServerLayout "Layout"
[X] [ 9.246] (**) |-->Screen "Screen0" (0)
[X] [ 9.246] (**) | |-->Monitor "Monitor0"
[X] [ 9.246] (**) | |-->Device "Video0"
[X] [ 9.247] (**) |-->Input Device "Mouse0"
[X] [ 9.247] (**) |-->Input Device "Keyboard0"
[X] [ 9.247] (**) |-->Input Device "Keyboard1"
[X] [ 9.247] (**) |-->Input Device "Keyboard2"
[X] [ 9.247] (**) |-->Input Device "Keyboard3"
[X] [ 9.247] (**) |-->Input Device "Keyboard4"
[X] [ 9.247] (**) |-->Input Device "Keyboard5"
[X] [ 9.247] (**) Option "DontVTSwitch" "on"
[X] [ 9.247] (**) Option "DontZap" "on"
[X] [ 9.247] (**) Option "DontZoom" "on"
[X] [ 9.247] (**) Option "NoPM" "on"
[X] [ 9.247] (**) Option "AIGLX" "off"
[X] [ 9.247] (**) Option "AutoAddDevices" "off"
[X] [ 9.248] (**) Not automatically adding devices
[X] [ 9.248] (==) Automatically enabling devices
[X] [ 9.248] (==) Automatically adding GPU devices
[X] [ 9.248] (WW) The directory "/usr/share/fonts/X11/misc" does not exist.
[X] [ 9.248] Entry deleted from font path.
[X] [ 9.248] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[X] [ 9.248] Entry deleted from font path.
[X] [ 9.248] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[X] [ 9.248] Entry deleted from font path.
[X] [ 9.248] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[X] [ 9.248] Entry deleted from font path.
[X] [ 9.248] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[X] [ 9.248] Entry deleted from font path.
[X] [ 9.248] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[X] [ 9.249] Entry deleted from font path.
[X] [ 9.249] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[X] [ 9.249] Entry deleted from font path.
[X] [ 9.249] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[X] [ 9.249] Entry deleted from font path.
[X] [ 9.249] (==) FontPath set to:
[X] built-ins
[X] [ 9.249] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[X] [ 9.249] (==) |-->Input Device "Mouse0"
[X] [ 9.249] (==) |-->Input Device ""
[X] [ 9.249] (==) The core pointer device wasn't specified explicitly in the layout.
[X] Using the first mouse device.
[X] [ 9.249] (==) The core keyboard device wasn't specified explicitly in the layout.
[X] Using the default keyboard configuration.
[X] [ 9.249] (II) Loader magic: 0xb77bf6a0
[X] [ 9.249] (II) Module ABI versions:
[X] [ 9.249] X.Org ANSI C Emulation: 0.4
[X] [ 9.249] X.Org Video Driver: 13.1
[X] [ 9.250] X.Org XInput driver : 18.0
[X] [ 9.250] X.Org Server Extension : 7.0
[X] [ 9.250] (II) config/udev: Adding drm device (/dev/dri/card0)
[X] [ 9.253] (--) PCI:*(0:0:1:0) 1002:9802:105b:0e29 rev 0, Mem @ 0xc0000000/268435456, 0xfeb00000/262144, I/O @ 0x0000f000/256
[X out] Initializing built-in extension Generic Event Extension
[X] [ 9.253] Initializing built-in extension Generic Event Extension
[X out] Initializing built-in extension SHAPE
[X] [ 9.253] Initializing built-in extension SHAPE
[X out] Initializing built-in extension MIT-SHM
[X] [ 9.253] Initializing built-in extension MIT-SHM
[X out] Initializing built-in extension XInputExtension
[X] [ 9.253] Initializing built-in extension XInputExtension
[X out] Initializing built-in extension XTEST
[X] [ 9.254] Initializing built-in extension XTEST
[X out] Initializing built-in extension BIG-REQUESTS
[X] [ 9.254] Initializing built-in extension BIG-REQUESTS
[X out] Initializing built-in extension SYNC
[X] [ 9.254] Initializing built-in extension SYNC
[X out] Initializing built-in extension XKEYBOARD
[X] [ 9.254] Initializing built-in extension XKEYBOARD
[X out] Initializing built-in extension XC-MISC
[X] [ 9.254] Initializing built-in extension XC-MISC
[X out] Initializing built-in extension SECURITY
[X] [ 9.254] Initializing built-in extension SECURITY
[X out] Initializing built-in extension XINERAMA
[X] [ 9.254] Initializing built-in extension XINERAMA
[X out] Initializing built-in extension XFIXES
[X] [ 9.254] Initializing built-in extension XFIXES
[X out] Initializing built-in extension RENDER
[X] [ 9.254] Initializing built-in extension RENDER
[X out] Initializing built-in extension RANDR
[X] [ 9.254] Initializing built-in extension RANDR
[X out] Initializing built-in extension COMPOSITE
[X] [ 9.254] Initializing built-in extension COMPOSITE
[X out] Initializing built-in extension DAMAGE
[X] [ 9.255] Initializing built-in extension DAMAGE
[X out] Initializing built-in extension MIT-SCREEN-SAVER
[X] [ 9.255] Initializing built-in extension MIT-SCREEN-SAVER
[X out] Initializing built-in extension DOUBLE-BUFFER
[X] [ 9.255] Initializing built-in extension DOUBLE-BUFFER
[X out] Initializing built-in extension RECORD
[X] [ 9.255] Initializing built-in extension RECORD
[X out] Initializing built-in extension DPMS
[X] [ 9.255] Initializing built-in extension DPMS
[X out] Initializing built-in extension X-Resource
[X] [ 9.255] Initializing built-in extension X-Resource
[X out] Initializing built-in extension XVideo
[X] [ 9.255] Initializing built-in extension XVideo
[X out] Initializing built-in extension XVideo-MotionCompensation
[X] [ 9.255] Initializing built-in extension XVideo-MotionCompensation
[X out] Initializing built-in extension SELinux
[X] [ 9.255] Initializing built-in extension SELinux
[X out] Initializing built-in extension XFree86-VidModeExtension
[X] [ 9.255] Initializing built-in extension XFree86-VidModeExtension
[X out] Initializing built-in extension XFree86-DGA
[X] [ 9.255] Initializing built-in extension XFree86-DGA
[X out] Initializing built-in extension XFree86-DRI
[X] [ 9.256] Initializing built-in extension XFree86-DRI
[X out] Initializing built-in extension DRI2
[X] [ 9.256] Initializing built-in extension DRI2
[X] [ 9.256] (II) LoadModule: "glx"
[X] [ 9.256] (WW) Warning, couldn't open module glx
[X] [ 9.256] (II) UnloadModule: "glx"
[X] [ 9.256] (II) Unloading glx
[X] [ 9.256] (EE) Failed to load module "glx" (module does not exist, 0)
[X] [ 9.257] (II) LoadModule: "ati"
[X] [ 9.257] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[X] [ 9.257] (II) Module ati: vendor="X.Org Foundation"
[X] [ 9.257] compiled for 1.13.3, module version = 7.1.0
[X] [ 9.257] Module class: X.Org Video Driver
[X] [ 9.257] ABI class: X.Org Video Driver, version 13.1
[X] [ 9.257] (II) LoadModule: "radeon"
[X] [ 9.258] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[X] [ 9.258] (II) Module radeon: vendor="X.Org Foundation"
[X] [ 9.258] compiled for 1.13.3, module version = 7.1.0
[X] [ 9.258] Module class: X.Org Video Driver
[X] [ 9.258] ABI class: X.Org Video Driver, version 13.1
[X] [ 9.258] (II) LoadModule: "evdev"
[X] [ 9.258] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[X] [ 9.259] (II) Module evdev: vendor="X.Org Foundation"
[X] [ 9.259] compiled for 1.13.3, module version = 2.7.3
[X] [ 9.259] Module class: X.Org XInput Driver
[X] [ 9.259] ABI class: X.Org XInput driver, version 18.0
[X] [ 9.259] (II) LoadModule: "kbd"
[X] [ 9.259] (WW) Warning, couldn't open module kbd
[X] [ 9.259] (II) UnloadModule: "kbd"
[X] [ 9.259] (II) Unloading kbd
[X] [ 9.259] (EE) Failed to load module "kbd" (module does not exist, 0)
[X] [ 9.260] (II) RADEON: Driver for ATI Radeon chipsets:
[X] ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
[X] ATI Radeon Mobility X300 (M24) 3152 (PCIE),
[X] ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
[X] ATI Radeon X600 (RV380) 3E50 (PCIE),
[X] ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
[X] ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
[X] ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
[X] ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
[X] ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
[X] ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
[X] ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
[X] ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
[X] ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
[X] ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
[X] ATI Radeon IGP330M/340M/350M (U2) 4337,
[X] ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
[X] ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
[X] ATI Radeon X800PRO (R420) JI (AGP),
[X] ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
[X] ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
[X] ATI Radeon Mobility 9800 (M18) JN (AGP),
[X] ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
[X] ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
[X] ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
[X] ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
[X] ATI Radeon Mobility M7 LW (AGP),
[X] ATI Mobility FireGL 7800 M7 LX (AGP),
[X] ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
[X] ATI FireGL Mobility 9000 (M9) Ld (AGP),
[X] ATI Radeon Mobility 9000 (M9) Lf (AGP),
[X] ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
[X] ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
[X] ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
[X] ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
[X] ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
[X] ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
[X] ATI Radeon Mobility 9600 (M10) NQ (AGP),
[X] ATI Radeon Mobility 9600 (M11) NR (AGP),
[X] ATI Radeon Mobility 9600 (M10) NS (AGP),
[X] ATI FireGL Mobility T2 (M10) NT (AGP),
[X] ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
[X] ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
[X] ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
[X] ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
[X] ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
[X] ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
[X] ATI Radeon Mobility X300 (M22) 5460 (PCIE),
[X] ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
[X] ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
[X] ATI Radeon X800PRO (R423) UI (PCIE),
[X] ATI Radeon X800LE (R423) UJ (PCIE),
[X] ATI Radeon X800SE (R423) UK (PCIE),
[X] ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
[X] ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
[X] ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
[X] ATI FireGL unknown (R423) UR (PCIE),
[X] ATI FireGL unknown (R423) UT (PCIE),
[X] ATI Mobility FireGL V5000 (M26) (PCIE),
[X] ATI Mobility FireGL V5000 (M26) (PCIE),
[X] ATI Mobility Radeon X700 XL (M26) (PCIE),
[X] ATI Mobility Radeon X700 (M26) (PCIE),
[X] ATI Mobility Radeon X700 (M26) (PCIE),
[X] ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
[X] ATI Radeon Mobility 9100 IGP (U3) 5835,
[X] ATI Radeon XPRESS 200 5954 (PCIE),
[X] ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
[X] ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
[X] ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
[X] ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
[X] ATI Radeon XPRESS 200M 5975 (PCIE),
[X] ATI Radeon XPRESS 200 5A41 (PCIE),
[X] ATI Radeon XPRESS 200M 5A42 (PCIE),
[X] ATI Radeon XPRESS 200 5A61 (PCIE),
[X] ATI Radeon XPRESS 200M 5A62 (PCIE),
[X] ATI Radeon X300 (RV370) 5B60 (PCIE),
[X] ATI Radeon X600 (RV370) 5B62 (PCIE),
[X] ATI Radeon X550 (RV370) 5B63 (PCIE),
[X] ATI FireGL V3100 (RV370) 5B64 (PCIE),
[X] ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
[X] ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
[X] ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
[X] ATI Mobility Radeon X800 XT (M28) (PCIE),
[X] ATI Mobility FireGL V5100 (M28) (PCIE),
[X] ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
[X] ATI Radeon X850 XT PE (R480) (PCIE),
[X] ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
[X] ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
[X] ATI Radeon X850 XT (R480) (PCIE),
[X] ATI Radeon X800XT (R423) 5D57 (PCIE),
[X] ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
[X] ATI Radeon X700 PRO (RV410) (PCIE),
[X] ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
[X] ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
[X] ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
[X] ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
[X] ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
[X] ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
[X] ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
[X] ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
[X] ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
[X] ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
[X] ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
[X] ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
[X] ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
[X] ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
[X] ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
[X] ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
[X] ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
[X] ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
[X] ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
[X] ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
[X] ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
[X] ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
[X] ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
[X] ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
[X] ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
[X] ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
[X] ATI Mobility Radeon X1700, ATI Radeon X2300HD,
[X] ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
[X] ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
[X] ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
[X] ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
[X] ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
[X] ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
[X] ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
[X] ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
[X] ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
[X] ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
[X] ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
[X] ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
[X] ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
[X] ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
[X] ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
[X] ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
[X] ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
[X] ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
[X] ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
[X] ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
[X] AMD FireStream 9250, ATI FirePro V8700 (FireGL),
[X] ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
[X] ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
[X] ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
[X] ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
[X] ATI Mobility Radeon HD 4670, ATI FirePro M5750,
[X] ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
[X] ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
[X] ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
[X] ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
[X] ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
[X] ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
[X] ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
[X] ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
[X] ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
[X] ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
[X] ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
[X] ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
[X] ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
[X] ATI Mobility Radeon HD 3850 X2, ATI RV670,
[X] ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
[X] ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
[X] ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
[X] ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
[X] ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
[X] ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
[X] ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
[X] ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
[X] ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
[X] ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
[X] ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
[X] ATI FireGL V3600, ATI Radeon HD 2600 LE,
[X] ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
[X] ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
[X] ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
[X] ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
[X] ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
[X] ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
[X] ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
[X] ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
[X] ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
[X] ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
[X] ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
[X] ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
[X] ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
[X] SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
[X] ATI Radeon 4100, ATI Mobility Radeon HD 4200,
[X] ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
[X] AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
[X] AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
[X] AMD Radeon HD 6300 Series Graphics,
[X] AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
[X] ATI FirePro (FireGL) Graphics Adapter,
[X] ATI FirePro (FireGL) Graphics Adapter,
[X] ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
[X] AMD Firestream 9350, ATI Radeon HD 5800 Series,
[X] ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
[X] ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
[X] ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
[X] ATI Mobility Radeon HD 5800 Series,
[X] ATI FirePro (FireGL) Graphics Adapter,
[X] ATI FirePro (FireGL) Graphics Adapter,
[X] ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
[X] ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
[X] ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
[X] ATI Mobility Radeon HD 5000 Series,
[X] ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
[X] ATI FirePro (FireGL) Graphics Adapter,
[X] ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
[X] ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
[X] ATI Mobility Radeon HD 5000 Series,
[X] ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
[X] ATI Mobility Radeon Graphics, CEDAR,
[X] ATI FirePro (FireGL) Graphics Adapter,
[X] ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
[X] ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
[X] CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
[X] AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
[X] CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
[X] BARTS, BARTS, Mobility Radeon HD 6000 Series,
[X] Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
[X] AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
[X] AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
[X] TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
[X] TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
[X] CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
[X] CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
[X] ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
[X] ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
[X] ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
[X] TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, PITCAIRN, PITCAIRN,
[X] PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
[X] PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, VERDE, VERDE, VERDE, VERDE,
[X] VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
[X] VERDE, VERDE, VERDE, VERDE, VERDE, VERDE
[X] [ 9.265] (--) using VT number 2
[X] [ 9.271] (II) [KMS] Kernel modesetting enabled.
[X] [ 9.271] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[X] [ 9.271] (**) RADEON(0): Depth 16, (--) framebuffer bpp 16
[X] [ 9.271] (II) RADEON(0): Pixel depth = 16 bits stored in 2 bytes (16 bpp pixmaps)
[X] [ 9.271] (==) RADEON(0): Default visual is TrueColor
[X] [ 9.271] (==) RADEON(0): RGB weight 565
[X] [ 9.271] (II) RADEON(0): Using 6 bits per RGB (8 bit DAC)
[X] [ 9.271] (--) RADEON(0): Chipset: "AMD Radeon HD 6310 Graphics" (ChipID = 0x9802)
[X] [ 9.271] (II) Loading sub module "dri2"
[X] [ 9.271] (II) LoadModule: "dri2"
[X] [ 9.271] (II) Module "dri2" already built-in
[X] [ 9.271] (II) Loading sub module "exa"
[X] [ 9.271] (II) LoadModule: "exa"
[X] [ 9.271] (II) Loading /usr/lib/xorg/modules/libexa.so
[X] [ 9.272] (II) Module exa: vendor="X.Org Foundation"
[X] [ 9.272] compiled for 1.13.3, module version = 2.6.0
[X] [ 9.272] ABI class: X.Org Video Driver, version 13.1
[X] [ 9.272] (II) RADEON(0): KMS Color Tiling: enabled
[X] [ 9.272] (II) RADEON(0): KMS Color Tiling 2D: enabled
[X] [ 9.272] (II) RADEON(0): KMS Pageflipping: enabled
[X] [ 9.272] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[X] [ 9.306] (II) RADEON(0): Output DVI-0 using monitor section Monitor0
[X] [ 9.306] (**) RADEON(0): Option "PreferredMode" "1920x1080"
[X] [ 9.308] (II) RADEON(0): Output HDMI-0 has no monitor section
[X] [ 9.322] (II) RADEON(0): Output VGA-0 has no monitor section
[X] [ 9.355] (II) RADEON(0): EDID for output DVI-0
[X] [ 9.355] (II) RADEON(0): Manufacturer: BNQ Model: 7887 Serial#: 21573
[X] [ 9.355] (II) RADEON(0): Year: 2011 Week: 3
[X] [ 9.355] (II) RADEON(0): EDID Version: 1.3
[X] [ 9.355] (II) RADEON(0): Digital Display Input
[X] [ 9.355] (II) RADEON(0): Max Image Size [cm]: horiz.: 48 vert.: 27
[X] [ 9.355] (II) RADEON(0): Gamma: 2.20
[X] [ 9.355] (II) RADEON(0): DPMS capabilities: Off
[X] [ 9.355] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[X] [ 9.355] (II) RADEON(0): Default color space is primary color space
[X] [ 9.355] (II) RADEON(0): First detailed timing is preferred mode
[X] [ 9.355] (II) RADEON(0): redX: 0.637 redY: 0.349 greenX: 0.333 greenY: 0.605
[X] [ 9.356] (II) RADEON(0): blueX: 0.148 blueY: 0.061 whiteX: 0.312 whiteY: 0.329
[X] [ 9.356] (II) RADEON(0): Supported established timings:
[X] [ 9.356] (II) RADEON(0): 720x400@70Hz
[X] [ 9.356] (II) RADEON(0): 640x480@60Hz
[X] [ 9.356] (II) RADEON(0): 640x480@75Hz
[X] [ 9.356] (II) RADEON(0): 800x600@60Hz
[X] [ 9.356] (II) RADEON(0): 800x600@75Hz
[X] [ 9.356] (II) RADEON(0): 832x624@75Hz
[X] [ 9.356] (II) RADEON(0): 1024x768@60Hz
[X] [ 9.356] (II) RADEON(0): 1024x768@75Hz
[X] [ 9.356] (II) RADEON(0): 1280x1024@75Hz
[X] [ 9.356] (II) RADEON(0): 1152x864@75Hz
[X] [ 9.356] (II) RADEON(0): Manufacturer's mask: 0
[X] [ 9.356] (II) RADEON(0): Supported standard timings:
[X] [ 9.356] (II) RADEON(0): #0: hsize: 1024 vsize 576 refresh: 60 vid: 49249
[X] [ 9.356] (II) RADEON(0): #1: hsize: 1280 vsize 800 refresh: 60 vid: 129
[X] [ 9.356] (II) RADEON(0): #2: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[X] [ 9.357] (II) RADEON(0): #3: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[X] [ 9.357] (II) RADEON(0): #4: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[X] [ 9.357] (II) RADEON(0): #5: hsize: 1600 vsize 900 refresh: 60 vid: 49321
[X] [ 9.357] (II) RADEON(0): #6: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[X] [ 9.357] (II) RADEON(0): #7: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[X] [ 9.357] (II) RADEON(0): Supported detailed timing:
[X] [ 9.357] (II) RADEON(0): clock: 148.5 MHz Image Size: 477 x 268 mm
[X] [ 9.357] (II) RADEON(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[X] [ 9.357] (II) RADEON(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[X] [ 9.357] (II) RADEON(0): Serial No: 41B04503SL0
[X] [ 9.357] (II) RADEON(0): Ranges: V min: 50 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 215 MHz
[X] [ 9.357] (II) RADEON(0): Monitor name: BenQ GL2240
[X] [ 9.357] (II) RADEON(0): EDID (in hex):
[X] [ 9.357] (II) RADEON(0): 00ffffffffffff0009d1877845540000
[X] [ 9.358] (II) RADEON(0): 0315010380301b782e1421a359559b26
[X] [ 9.358] (II) RADEON(0): 0f5054a56b8061c0810081c081408180
[X] [ 9.358] (II) RADEON(0): a9c0b300d1c0023a801871382d40582c
[X] [ 9.358] (II) RADEON(0): 4500dd0c1100001e000000ff00343142
[X] [ 9.358] (II) RADEON(0): 3034353033534c300a20000000fd0032
[X] [ 9.358] (II) RADEON(0): 4c1e5315000a202020202020000000fc
[X] [ 9.358] (II) RADEON(0): 0042656e5120474c323234300a2000f3
[X] [ 9.358] (II) RADEON(0): Not using mode "1280x1024" (vrefresh out of range)
[X] [ 9.358] (II) RADEON(0): Not using mode "1152x864" (vrefresh out of range)
[X] [ 9.358] (II) RADEON(0): Not using mode "1024x768" (vrefresh out of range)
[X] [ 9.358] (II) RADEON(0): Not using mode "832x624" (vrefresh out of range)
[X] [ 9.358] (II) RADEON(0): Not using mode "800x600" (vrefresh out of range)
[X] [ 9.358] (II) RADEON(0): Not using mode "640x480" (vrefresh out of range)
[X] [ 9.358] (II) RADEON(0): Not using mode "720x400" (vrefresh out of range)
[X] [ 9.358] (II) RADEON(0): Printing probed modes for output DVI-0
[X] [ 9.359] (II) RADEON(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz UeP)
[X] [ 9.359] (II) RADEON(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 (67.1 kHz)
[X] [ 9.359] (II) RADEON(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[X] [ 9.359] (II) RADEON(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
[X] [ 9.359] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[X] [ 9.359] (II) RADEON(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[X] [ 9.359] (II) RADEON(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[X] [ 9.359] (II) RADEON(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
[X] [ 9.359] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[X] [ 9.359] (II) RADEON(0): Modeline "1024x576"x60.0 46.97 1024 1064 1168 1312 576 577 580 597 -hsync +vsync (35.8 kHz)
[X] [ 9.359] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[X] [ 9.359] (II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[X] [ 9.362] (II) RADEON(0): EDID for output HDMI-0
[X] [ 9.376] (II) RADEON(0): EDID for output VGA-0
[X] [ 9.376] (II) RADEON(0): Output DVI-0 connected
[X] [ 9.376] (II) RADEON(0): Output HDMI-0 disconnected
[X] [ 9.376] (II) RADEON(0): Output VGA-0 disconnected
[X] [ 9.376] (II) RADEON(0): Using user preference for initial modes
[X] [ 9.376] (II) RADEON(0): Output DVI-0 using initial mode 1920x1080
[X] [ 9.376] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[X] [ 9.376] (II) RADEON(0): mem size init: gart size :1fdef000 vram size: s:18000000 visible:177d7000
[X] [ 9.376] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[X] [ 9.377] (==) RADEON(0): DPI set to (96, 96)
[X] [ 9.377] (II) Loading sub module "fb"
[X] [ 9.377] (II) LoadModule: "fb"
[X] [ 9.377] (II) Loading /usr/lib/xorg/modules/libfb.so
[X] [ 9.377] (II) Module fb: vendor="X.Org Foundation"
[X] [ 9.377] compiled for 1.13.3, module version = 1.0.0
[X] [ 9.377] ABI class: X.Org ANSI C Emulation, version 0.4
[X] [ 9.377] (II) Loading sub module "ramdac"
[X] [ 9.377] (II) LoadModule: "ramdac"
[X] [ 9.377] (II) Module "ramdac" already built-in
[X] [ 9.378] (II) RADEON(0): [DRI2] Setup complete
[X] [ 9.378] (II) RADEON(0): [DRI2] DRI driver: r600
[X] [ 9.378] (II) RADEON(0): [DRI2] VDPAU driver: r600
[X] [ 9.378] (II) RADEON(0): Front buffer size: 4080K
[X] [ 9.378] (II) RADEON(0): VRAM usage limit set to 342673K
[X] [ 9.378] (==) RADEON(0): Backing store disabled
[X] [ 9.378] (II) RADEON(0): Direct rendering enabled
[X] [ 9.378] (II) EXA(0): Driver allocated offscreen pixmaps
[X] [ 9.379] (II) EXA(0): Driver registered support for the following operations:
[X] [ 9.379] (II) Solid
[X] [ 9.379] (II) Copy
[X] [ 9.379] (II) Composite (RENDER acceleration)
[X] [ 9.379] (II) UploadToScreen
[X] [ 9.379] (II) DownloadFromScreen
[X] [ 9.379] (II) RADEON(0): Acceleration enabled
[X] [ 9.379] (==) RADEON(0): DPMS enabled
[X] [ 9.379] (==) RADEON(0): Silken mouse enabled
[X] [ 9.379] (II) RADEON(0): Set up textured video
[X] [ 9.379] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[X] [ 9.379] (II) RADEON(0): [XvMC] Extension initialized.
[X] [ 9.379] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[X] [ 9.380] (WW) RADEON(0): Option "PreferredMode" is not used
[X] [ 9.380] (--) RandR disabled
[X] [ 9.394] (II) SELinux: Disabled on system
[X] [ 9.406] (II) RADEON(0): Setting screen physical size to 507 x 285
[X] [ 9.413] (II) XKB: generating xkmfile /var/lib/xkb/server-02D8252E59564A234380F1E5417646A9DB3B7452.xkm
[X] [ 9.455] (II) Using input driver 'evdev' for 'Mouse0'
[X] [ 9.455] (**) Option "SendCoreEvents" "on"
[X] [ 9.455] (**) Option "CorePointer" "on"
[X] [ 9.456] (**) Mouse0: always reports core events
[X] [ 9.456] (**) evdev: Mouse0: Device: "/dev/input/event7"
[X] [ 9.456] (--) evdev: Mouse0: Vendor 0x458 Product 0x3a
[X] [ 9.456] (--) evdev: Mouse0: Found 3 mouse buttons
[X] [ 9.456] (--) evdev: Mouse0: Found scroll wheel(s)
[X] [ 9.456] (--) evdev: Mouse0: Found relative axes
[X] [ 9.456] (--) evdev: Mouse0: Found x and y relative axes
[X] [ 9.456] (II) evdev: Mouse0: Configuring as mouse
[X] [ 9.456] (II) evdev: Mouse0: Adding scrollwheel support
[X] [ 9.456] (**) evdev: Mouse0: YAxisMapping: buttons 4 and 5
[X] [ 9.456] (**) evdev: Mouse0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[X] [ 9.456] (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE, id 6)
[X] [ 9.457] (II) evdev: Mouse0: initialized for relative axes.
[X] [ 9.457] (**) Mouse0: (accel) keeping acceleration scheme 1
[X] [ 9.457] (**) Option "ConstantDeceleration" "5.000000"
[X] [ 9.457] (**) Mouse0: (accel) constant deceleration by 5.0
[X] [ 9.457] (**) Mouse0: (accel) acceleration profile 0
[X] [ 9.457] (**) Mouse0: (accel) acceleration factor: 2.000
[X] [ 9.457] (**) Mouse0: (accel) acceleration threshold: 4
[X] [ 9.458] (II) Using input driver 'evdev' for 'Keyboard0'
[X] [ 9.458] (**) Option "SendCoreEvents" "on"
[X] [ 9.458] (**) Keyboard0: always reports core events
[X] [ 9.458] (**) evdev: Keyboard0: Device: "/dev/input/event6"
[X] [ 9.458] (--) evdev: Keyboard0: Vendor 0x46d Product 0xc31c
[X] [ 9.458] (--) evdev: Keyboard0: Found absolute axes
[X] [ 9.458] (II) evdev: Keyboard0: Forcing absolute x/y axes to exist.
[X] [ 9.458] (--) evdev: Keyboard0: Found keys
[X] [ 9.458] (II) evdev: Keyboard0: Forcing relative x/y axes to exist.
[X] [ 9.458] (II) evdev: Keyboard0: Configuring as mouse
[X] [ 9.458] (II) evdev: Keyboard0: Configuring as keyboard
[X] [ 9.458] (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD, id 7)
[X] [ 9.458] (**) Option "xkb_rules" "evdev"
[X] [ 9.459] (**) Option "xkb_model" "evdev"
[X] [ 9.459] (**) Option "xkb_layout" "us"
[X] [ 9.464] (II) XKB: generating xkmfile /var/lib/xkb/server-D378AD8F86E560F712A83EE36E4E5E92C595B9BD.xkm
[X] [ 9.503] (II) evdev: Keyboard0: initialized for absolute axes.
[X] [ 9.504] (**) Keyboard0: (accel) keeping acceleration scheme 1
[X] [ 9.504] (**) Keyboard0: (accel) acceleration profile 0
[X] [ 9.504] (**) Keyboard0: (accel) acceleration factor: 2.000
[X] [ 9.504] (**) Keyboard0: (accel) acceleration threshold: 4
[X] [ 9.504] (II) Using input driver 'evdev' for 'Keyboard1'
[X] [ 9.504] (**) Option "SendCoreEvents" "on"
[X] [ 9.504] (**) Keyboard1: always reports core events
[X] [ 9.504] (**) evdev: Keyboard1: Device: "/dev/input/event5"
[X] [ 9.504] (--) evdev: Keyboard1: Vendor 0x46d Product 0xc31c
[X] [ 9.504] (--) evdev: Keyboard1: Found keys
[X] [ 9.504] (II) evdev: Keyboard1: Configuring as keyboard
[X] [ 9.504] (II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD, id 8)
[X] [ 9.504] (**) Option "xkb_rules" "evdev"
[X] [ 9.504] (**) Option "xkb_model" "evdev"
[X] [ 9.504] (**) Option "xkb_layout" "us"
[X] [ 9.505] (II) Using input driver 'evdev' for 'Keyboard2'
[X] [ 9.505] (**) Option "SendCoreEvents" "on"
[X] [ 9.505] (**) Keyboard2: always reports core events
[X] [ 9.505] (**) evdev: Keyboard2: Device: "/dev/input/event4"
[X] [ 9.505] (--) evdev: Keyboard2: Vendor 0x1 Product 0x1
[X] [ 9.505] (--) evdev: Keyboard2: Found keys
[X] [ 9.505] (II) evdev: Keyboard2: Configuring as keyboard
[X] [ 9.505] (II) XINPUT: Adding extended input device "Keyboard2" (type: KEYBOARD, id 9)
[X] [ 9.505] (**) Option "xkb_rules" "evdev"
[X] [ 9.505] (**) Option "xkb_model" "evdev"
[X] [ 9.506] (**) Option "xkb_layout" "us"
[X] [ 9.506] (II) Using input driver 'evdev' for 'Keyboard3'
[X] [ 9.506] (**) Option "SendCoreEvents" "on"
[X] [ 9.506] (**) Keyboard3: always reports core events
[X] [ 9.507] (**) evdev: Keyboard3: Device: "/dev/input/event2"
[X] [ 9.507] (--) evdev: Keyboard3: Vendor 0 Product 0x1
[X] [ 9.507] (--) evdev: Keyboard3: Found keys
[X] [ 9.507] (II) evdev: Keyboard3: Configuring as keyboard
[X] [ 9.507] (II) XINPUT: Adding extended input device "Keyboard3" (type: KEYBOARD, id 10)
[X] [ 9.507] (**) Option "xkb_rules" "evdev"
[X] [ 9.507] (**) Option "xkb_model" "evdev"
[X] [ 9.507] (**) Option "xkb_layout" "us"
[X] [ 9.508] (II) Using input driver 'evdev' for 'Keyboard4'
[X] [ 9.508] (**) Option "SendCoreEvents" "on"
[X] [ 9.508] (**) Keyboard4: always reports core events
[X] [ 9.508] (**) evdev: Keyboard4: Device: "/dev/input/event1"
[X] [ 9.508] (--) evdev: Keyboard4: Vendor 0 Product 0x3
[X] [ 9.508] (--) evdev: Keyboard4: Found keys
[X] [ 9.508] (II) evdev: Keyboard4: Configuring as keyboard
[X] [ 9.508] (II) XINPUT: Adding extended input device "Keyboard4" (type: KEYBOARD, id 11)
[X] [ 9.508] (**) Option "xkb_rules" "evdev"
[X] [ 9.509] (**) Option "xkb_model" "evdev"
[X] [ 9.509] (**) Option "xkb_layout" "us"
[X] [ 9.509] (II) Using input driver 'evdev' for 'Keyboard5'
[X] [ 9.509] (**) Option "SendCoreEvents" "on"
[X] [ 9.509] (**) Keyboard5: always reports core events
[X] [ 9.509] (**) evdev: Keyboard5: Device: "/dev/input/event0"
[X] [ 9.510] (--) evdev: Keyboard5: Vendor 0 Product 0x1
[X] [ 9.510] (--) evdev: Keyboard5: Found keys
[X] [ 9.510] (II) evdev: Keyboard5: Configuring as keyboard
[X] [ 9.510] (II) XINPUT: Adding extended input device "Keyboard5" (type: KEYBOARD, id 12)
[X] [ 9.510] (**) Option "xkb_rules" "evdev"
[X] [ 9.510] (**) Option "xkb_model" "evdev"
[X] [ 9.510] (**) Option "xkb_layout" "us"
[X] [ 9.511] (II) Using input driver 'evdev' for 'Mouse0'
[X] [ 9.511] (**) Option "SendCoreEvents" "on"
[X] [ 9.511] (**) Option "CorePointer" "on"
[X] [ 9.511] (**) Mouse0: always reports core events
[X] [ 9.511] (**) evdev: Mouse0: Device: "/dev/input/event7"
[X] [ 9.511] (WW) evdev: Mouse0: device file is duplicate. Ignoring.
[X] [ 9.511] (EE) PreInit returned 8 for "Mouse0"
[X] [ 9.511] (II) UnloadModule: "evdev"
[X] [ 9.511] (II) LoadModule: "kbd"
[X] [ 9.512] (WW) Warning, couldn't open module kbd
[X] [ 9.512] (II) UnloadModule: "kbd"
[X] [ 9.512] (II) Unloading kbd
[X] [ 9.512] (EE) Failed to load module "kbd" (module does not exist, 0)
[X] [ 9.512] (EE) No input driver matching `kbd'
[X] [ 9.515] (II) config/udev: Adding drm device (/dev/dri/card0) card0 /sys/devices/pci0000:00/0000:00:01.0/drm/card0
[X] [ 9.515] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[gm] Allocate 40960 bytes of shared memory for X imgbuf.
[gm] New shared memory block 64x320@16bit: id 0x00000000, address 0xb735d000.
[gm] Allocate 4008960 bytes of shared memory for X imgbuf.
[gm] New shared memory block 1856x1080@16bit: id 0x00010002, address 0xb6f79000.
[gm] TFTP: download and unpack file packages/alsa from 192.168.20.4.
[gm] It isn't WTware5 TFTP server...
[gm] TFTP: download and unpack file packages/alsalib from 192.168.20.4.
[gm] TFTP: download and unpack file packages/alsalib6 from 192.168.20.4.
[gm] modprobe snd-hda-intel.
[gm] modprobe snd-usb-audio.
[KERNEL] usbcore: registered new interface driver snd-usb-audio
/--- FILE "/proc/asound/devices" -----------------------
| 2: [ 0- 3]: digital audio playback
| 3: [ 0] : control
| 4: [ 1- 1]: digital audio playback
| 5: [ 1- 1]: digital audio capture
| 6: [ 1- 0]: digital audio playback
| 7: [ 1- 0]: digital audio capture
| 8: [ 1] : control
| 33: : timer
\----------------------------------------------------
[gm] hardware.cpp ( 981), load_alsa: -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
[gm] gm-main.cpp ( 315), load_alsa: -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
[gm] ERROR: Sound card not found. Disable sound.
[gm] Loading ISO 9660 and UDF CDROM filesystem drivers.
[gm] modprobe udf.
[gm] modprobe isofs.
[gm] Loading UTF8 charset.
[gm] modprobe nls_cp437.
[gm] modprobe nls_utf8.
[gm] Loading VFAT filesystem driver.
[gm] modprobe fat.
[gm] modprobe vfat.
[gm] modprobe ntfs.
[gm] Loading usb storage driver.
[KERNEL] NTFS driver 2.1.30 [Flags: R/O MODULE].
[gm] modprobe scsi_mod.
[gm] modprobe usb-storage.
[KERNEL] SCSI subsystem initialized
[KERNEL] Initializing USB Mass Storage driver...
[KERNEL] scsi0 : usb-storage 2-2:1.0
[gm] modprobe sd_mod.
[KERNEL] usbcore: registered new interface driver usb-storage
[KERNEL] USB Mass Storage support registered.
[pfac] Got command line /sbin/resolver 09d13808 dns [oz-01-lo-trm-03.gm.laura.grp].
[pfac] Ok, PID 592.
[gm] Nobody can control terminal by vnc.
[pfac] Process pid 592 terminated, status 00000000.
[gm] oz-01-lo-trm-03.gm.laura.grp => 192.168.20.8.
[gm] Free ram before fork terminal client /sbin/rdpclient (session 1): 1634172 Kb.
[pfac] Got command line /sbin/rdpclient 1.
[pfac] Ok, PID 593.
[rdpclient 593] RDP Terminal Client, WTware v.5.1.36, pipe 1, pid 593.
[rdpclient 593] Make RDP session with 192.168.20.8:3389.
[rdpclient 593] No username.
[rdpclient 593] No password.
[rdpclient 593] No domain.
[rdpclient 593] No shell.
[rdpclient 593] No directory.
[rdpclient 593] Window: 1856x1080@16.
[rdpclient 593] PFlags 0x000000C5.
[rdpclient 593] Keyboard 00000409:00000000.
[rdpclient 593] My hostname "terminal-ascod".
[rdpclient 593] TCP: connecting to 192.168.20.8:3389.
[rdpclient 593] TCP: connection with 192.168.20.8:3389 established.
[rdpclient 593] Turn keepalive on.
[rdpclient 593] Free ram after buffers allocation: 1634412 KB.
[rdpclient 593] RDP5 encryption (X.509).
[rdpclient 593] RC4 key 128 bit.
[KERNEL] scsi 0:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[KERNEL] sd 0:0:0:0: [sda] Attached SCSI removable disk
[hotplug] Action change.
[hotplug] R/w FAT mount ("/dev/sda", "/mnt/usb-rdp/0",..) failed, errno 123.
[hotplug] Action change.
[hotplug] R/o NTFS mount ("/dev/sda", "/mnt/usb-rdp/0",..) failed, errno 123.
[hotplug] R/o FAT mount ("/dev/sda", "/mnt/usb-rdp/0",..) failed, errno 123.
[pfac] Process pid 593 terminated, status 00000000.
[gm] TSClient gracefully end.
[rdpclient 593] Receive Disconnect Provider Ultimatum.
[rdpclient 593] Caught signal SIGTERM.
Home WTware diskless client.